Professional Documents
Culture Documents
PART – B
(Answer all five units, 5 X 10 = 50 Marks)
UNIT – I
2 With schematic diagram, explain various components in product cycle.
OR
3 Calculate the coordinates of a geometrical shape as given in figure.1, after translating from P1 (0, 0) to
P2 (120,100) with respect to its bottom left corner and rotating to 30o about P2. Draw these
transformations on a graph sheet and compare with calculated coordinates.
Page 1 of 2
Code: 13A03601 R13
5 Discuss the parametric modeling technique to create the model as shown in Figure 3.
Technical Data:
L= 24"
W= 16"
H= 0.787"
A= 0.315"
OR
7 Explain the concept the canned drill cycle with a schematic diagram and write CNC part program to
create a pattern of holes on 12 mm MS circular plate of diameter 140 mm as shown in Fig.5. Consider
N= 5, D =50 mm, and d=8 mm. Draw the orthographic view of the part drawing as per given dimensions
while explaining the canned cycle concept.
UNIT – IV
8 Discuss the concepts of Group Technology Layout with suitable illustrations and examples.
OR
9 With schematic diagrams, explain various material handling systems in a Flexible Manufacturing System
(FMS).
UNIT – V
10 With a block diagram, discuss the framework of Computer Aided Process Planning (CAPP).
OR
11 Explain in detail about the steps in Generative CAPP systems. .
*****
Page 2 of 2