: Listed in Table ENGINE: EPA07/10 DD Platform DATE:
August 2010
SUBJECT: SPN 174 FMI 0
ADDITIONS, REVISIONS, OR UPDATES
Publication Number Platform Section Title Change Page Number(s) DDC-SVC-MAN-0084 EPA07/10 DD Platform 34. SPN 174 FMI 0 Additional checks for Insert section as stated. other fault codes for coolant temp too high, fuel tank level, fuel pressure (fuel inlet restriction) and fuel system aeration. NOTE: Page numbers are based on the most recent version of the individual publication and may be adjusted throughout the annual print cycle. SPN 174/FMI 0 This diagnostic is typically a Fuel Temperature Too High. Check as follows: 1. Are any cooling system fault codes present? [a] Yes; repair those faults first. [b] No; go to step 2. 2. Is SPN 174 FMI 3 or 4 also present? [a] Yes; repair those faults first. [b] No; go to step 3. 3. Possible causes of high fuel temperature might be: □ Fuel aeration □ Fuel tank level □ Improper fuel pressure □ Fuel line restrictions 4. For further diagnosis, refer to section . ADDITIONAL SERVICE INFORMATION Additional service information is available in Power Service Literature.