Professional Documents
Culture Documents
Reset Drum
By: Printerthinker - 29 November 2012
Change Toner Cartridge
4. When the Toner, Drum, and Error LEDs are on and the Ready LED is off, release the GO button.
All of the LEDs will turn off.
5. Press the Go button two (2) times. The Toner, Drum, and Error LEDs will turn on.
7. The Error LED should now be flashing, close the front cover.
Simply open the front cover, and hold the “GO” button until all four LED’s are lit. Release the “GO”
button and close the front cover.
2. Hold the GO button while you turn the printer on. Hold the button until the Toner, Drum and Error
LEDs light up. Release GO, the LEDs will turn off.
3. Press GO once more, and the printer will print a test page.
2. Press GO three (3) times within two (2) seconds. The printer will print a settings page.
2. Hold the GO button while you turn the printer on. Hold the button until all the LEDs light up and
the Ready LED light turns off.
Privacy Policy