Professional Documents
Culture Documents
103 PDS July17 PDF
103 PDS July17 PDF
103
BENEFITS FEATURES
Maximise indication detection • Clear indications under visible light
• Find indications of all shapes and sizes, • Heavy particle buildup
thanks to the smallest particle on the
• Great particle mobility
market.
• Heavy buildup of highly magnetic particles • Protects parts and equipment against
aroundl leakage fields make for heavy- corrosion
contrast indications, especially when used • Superior surface wetting
with white contrast paint. • Very small particle size
Convenient to use • Works in visible light
• Inspect in all conditions without the need for • Oil-based formula
darkness or UV lights.
• Very low toxicity
• Available in a convenient aerosol format for
easy carrying and use in the field. • Low odour
103
APPLICATIONS Like all Magnaflux materials, 103 is closely
Defect location: surface and slightly subsurface controlled to ensure batch-to-batch consistency,
optimum process control and inspection
Ideal for:
reliability.
• Detecting fine and medium discontinuities
• Field testing
USER RECOMMENDATIONS
• Spot inspections
• In-service inspections Magnetic Particle
• Machined parts NDT Method Testing, Visible,
• Light surfaces Wet Method
• Difficult-to-reach areas Storage temperature 10oC to 30oC
Ideal for: Usage temperature -10oC to 50oC
• Inclusions
Suspension Vehicle MG/MX Carrier II
• Seams
• Shrink cracks White Contrast Paint 104A, 104plus, WCP-2
• Tears Cleaner/remover C5, C10, SKC-S
• Laps
Accessories Centrifuge Tube
• Flakes
• Welding defects
• Grinding cracks INSTRUCTIONS FOR USE
• Quenching cracks Clean the component before testing to reduce
• Fatigue cracks the risk of contamination and to provide a suit-
able test surface.
COMPOSITION
If the test surface is a dark colour, apply a thin
A suspension of black magnetic particles in a coating of a suitable white contrast paint to
high-flash, low-odour petroleum distillate. provide a contrasting background.
Before using, shake the aerosol can to ensure
PRODUCT PROPERTIES
that the ink is mixed thoroughly. You will need to
Form and colour Black liquid shake the can repeatedly during use.
Flash point > 93oC (bulk product) Spray the ink onto all surfaces of the component.
The indications will be formed during the applica-
SAE sensitivity 6-7
tion of a magnetising current.
Particle size range 0.2 - 2.0 µm
After inspection, the components should be
Viscosity at 38oC 2.5 mm2/S
properly demagnetised before cleaning.
Settlement volume
1.2 - 2.4 ml
(1 hour)
Sulphur content < 200 ppm
Halogen content < 200 ppm
103
PACKAGING AND PART NUMBERS
008A171 (x 10)