Professional Documents
Culture Documents
When using LastMaker functionality, please observe the prompt lines that appear in
the status bar bottom left.
Open LDemo1.v3e
Click on Imports icon, click on drop down menu and briefly explain Imports, conversion of STL &
IGS etc...
Use LM_Igs conversion process.pdf as a quick show of how to convert an IGS file.
Back in LastMaker.
Click UNDO / REDO to show effect, also shows we have undo/ redo.
Position first point - Position second point - Position third point and move third point.
Explain rest of toolbar,
Click undo
Select the cross section (White Line), in Distance box type in 10 and click OK button.
This should give you a complete set of cross sections from toe to heel at 10mm increments.
Click undo
Select Cross section – Side profile icon
This puts a cross section through the centre of the last, so it can be exported to 2D Engineer, for
the creation of TOE and BACK templates, for a way of checking screen last against the realistic
last.
Open SideProfile 1.jpg and SideProfile 2.jpg to show how toe and back templates are created.
WITHIN 2D Engineer, these can be modified if incorrect and imported back into LastMaker to
update the modifications to the screen last.
Toe Swap:
Open LDemo2.v3e
From the menu bar, select, Window – Vertically.
hover the mouse over the cross section. When highlighted, click LMB.
hover the mouse over the cross section. When highlighted, click LMB.
Click on Solid View icon, click on Wire frame icon, rotate and zoom around.
Grading:
Select Information from the Menu bar and select Gender
Select Default.GRF and open.
Click on Example
Click on size 5, click on width B click on OK.
Hover the mouse until the first cone line is highlighted and click LMB
Place the point on the line
Hover the mouse until the first cone line is highlighted and click LMB
Place the point on the line
The measurement between the two will shown. Click OK.
Click on Export icon and explaining that the last can go to ShoeDesign (.lst/Body) or, as an STL or
IGS to a milling machine.