1 Check Foundation Status (Limestone, Concrete) 2 Re-tighten all bolts and nuts 3 Surface Unit Set back from the wellhead central point 4 Unit Base Triangular from WH Center 5 Unit Base leveling 6 Unit Base aligned 7 Unit painting condition. 8 Unit Guard installed properly 9 Greasing all bearings (Central, Wrist pen, Equalizer) 10 Oil level at Gear Box 11 Gear Box for any observed leakage 12 Surface power Cables burying status 13 Any water or sand inside the Gear Box 14 Belts Guard Installed 15 Belts installed properly 16 Belt condition is acceptable 17 Horsehead aligned properly 18 Horsehead bridlewire is secured properly 19 Motor rails are secured properly 20 All terminal box wirings are properly connected secured 21 VSD concrete foundation is aligned and in proper direction 22 Power supply termination status 23 Motor to VSD power cable termination status 24 VFD cabint need cleaning/blowing dust 25 VFD Cabint is firmly hold with VFD base. 26 Motor sheave and Hub installed, Fixed properly. k List