Professional Documents
Culture Documents
Pléyades Questions
Pléyades Questions
1. Who was the responsible for the creation of the Oil Industry?
George Bissell.
2. What was the name of the first well driller?
William A. Smith, he was known as “Uncle Billy”.
3. What was the German Chemistry Industry Conglomerate that was a donor
to the National Socialism Party, closed in 1952?
The IG Farben Chemical Industry.
4. When y where OPEC was founded and what is the meaning of the
acronym?
OPEC (Organization of Petroleum Exporting Countries) was founded in September
14, 1960 in the Iranian capital, Baghdad.
5. When and who discovered the fabulous Portrero del Llano 4 well,
inaugurating the “Golden Age” of Mexican Oil?
It was discovered by Everette Lee DeGolyer, well known as “the hundred man”, in
1910, with a production of 110 000 bbls/day.
APPLIED DRILLING ENGINEERIG
by Adam T. Bourgoyne Jr.
Which are the principal components of the hoisting system? Chapter 1 page 7
1. The derrick and substructure
2. The block and tackle
3. The drawworks
Which is the main function of the circulation system? Chapter 2 page 12
The main function of the fluid circulating system is the remove the rock cutting from
the bottom hole to surface.
What process does the API recommend for the testing drilling cements? Cha
pter 3 page 86
1. Mud balance for determining the slurry density.
2. Filter press for determining the filtration rate of the slurry.
3. Rotational viscometer for determining the rheological properties of the slurry.
4. Consistometer for determining the thickening rate characteristic of the slurry.
5. Cement permeameter for determining the permeability of the set cement.
What other name recieve the flow formation fluids? Chapter 4 page 119
The flow formation fluids is called kick.
Questions – IKOKU page 1-10
5. With this method you can calculate the volume insitu of hydrocarbon
Volumetric Estimates
Book: Geology & Geophysics in Oil Exploration 2010 (Mahmoud Sroor )
5.- process of movement from source rock. Fluids are squeezed out by the
weight of the overlying sediments. Fluids tend to move toward the lowest
potential energy. (p.28)
Primary migration
RESERVOIR ENGINEERING HANDBOOK
1. Why do the expansion test performed and which are the purposes? (Pag.
137)
Constant-composition expansion experiments are performed on gas condensates
or crude oil to simulate the pressure-volume relations of these hydrocarbon
systems. The test is conducted for the purposes of determining:
• Saturation pressure (bubble-point or dew-point pressure)
• Isothermal compressibility coefficients of the single-phase fluid in excess of
saturation pressure
• Compressibility factors of the gas phase
• Total hydrocarbon volume as a function of pressure