This document appears to be homework instructions for a post-tensioned concrete beam design problem. A rectangular beam is given with dimensions, a parabolic tendon layout, prestress forces before and after losses, and superimposed loads. Students are asked to determine the flexural stress distribution in the concrete at midspan at transfer and under full service loads, and to compare to ACI stress limits.
This document appears to be homework instructions for a post-tensioned concrete beam design problem. A rectangular beam is given with dimensions, a parabolic tendon layout, prestress forces before and after losses, and superimposed loads. Students are asked to determine the flexural stress distribution in the concrete at midspan at transfer and under full service loads, and to compare to ACI stress limits.
This document appears to be homework instructions for a post-tensioned concrete beam design problem. A rectangular beam is given with dimensions, a parabolic tendon layout, prestress forces before and after losses, and superimposed loads. Students are asked to determine the flexural stress distribution in the concrete at midspan at transfer and under full service loads, and to compare to ACI stress limits.
1. A rectangular post-tensioned beam of width b = 11 inches and a total
depth h = 28 inches is post-tensioned using a single parabolic tendon having eccentricity e = 7.8 inches at midspan, and 0 inches at the simple supports. The prestress force immediately after transfer, Pi, is 334 kips and after all losses have taken place, the effective prestress force, Pe, is 281 kips. The member is to carry superimposed dead and live loads of 300 lb/ft and 1000 lb/ft, respectively, uniformly distributed over the 40 ft span. The 28-day concrete strength is f’c is 5000 psi, and at the time of transfer, f’ci is 4000 psi. Determine the flexural stress distribution in the concrete at midspan for: