Professional Documents
Culture Documents
ENGINEERING DRAWING
Time : 3 hrs. Electrician Marks: 50
-----------------------------------------------------------------------------------------------------------------
Q- 1) Identify the symbol for lighting circuit distribution fuse-board with switches
Q.4) Name the part labeled X in the device , which exerts pressure on the nut, prevent
rotation Of nut when tightened in position.
Q-5) These screws are operated by screw driver or spanner, the function of set screws
is same As grub screw . Screws are specified by the shape of head. Which one is round
or cup head screw?
Q-6) Three views of an object given in 1st angle projection .Draw the missing line in the
side view
Q-7) In which type of orthographic projection the left side or right side view of an object
is drawn on the same side itself.
Q-10) In the views of the object in 1st angle projection . Draw the missing line in the
side view
Q-11) Identify the surfaces of the blocks shown in isometric view with the corresponding
multi- Views and fill the numerals in the given tabulation column.
ENGINEERING DRAWING
Time : 3 hrs. Mech. Diesel Marks: 50
Q- 2) These screws are operated by screw driver or spanner, the function of set screws
is same as grub screw . Screws are specified by the shape of head. Which one is
fillister head screw?
Q-8) Three views of an object given in 1st angle projection. Draw the missing line in the
side view.
Q-11) Draw the front view of the isometric drawing in the direction of arrow.
Q-12) Identify the full sectional plan along the cutting plan A A.
Q-13) Several grads of pencils are available from which suitable grades are chosen for
Specific drawing. For drawing construction line, suitable grades of pencils are
A) 2H or 3H
B) HB or H
C) H or 2H
D) 8H or9H
Q-14) Space for the title block must be provided in the bottom right hand corner of the
drawing sheet. The size of the title block as recommended by the ISI is
A) 210 mm X 297 mm
B) 147 mm X 240 mm
C) 185 mm X 65 mm
D) 165 mm X 45 mm
Q-16) The symbolic figure for the projection methods are shown, identify the First angle
Projection symbol.
ENGINEERING DRAWING
Mechanic Diesel
Index -2
Q-2. -------------------------------------------------------------
Index-2
Q-3 -------------------------------------------------------------------
Index-2
Q-4 ---------------------------------------------------------------
Index-3
Q-5 --------------------------------------------
Index-2
Q-6
Index-2
Q-7 --------------------------------------------------------------
Index -2
Q-8
Index-3
Q-9
Index-6
Q-10
Index-6
Q-11
Index-3
Q-12
Index -6
Q-13 -----------------------------------------------------------------------------
-----------------------------------------------------------------------------
Index-2
Q-14 ----------------------------------------------------------------------------------
Index-2
Q-15
Index-6
Q-16
ENGINEERING DRAWING
Electrican
Index-2
Q)2---------------------------------------------------------------------------
Index-3
Q)3 --------------------------------------------------------------------------
Index-2
Q)4 ---------------------------------------------------------------------------
Index-2
Q)5
Index-3
Q)7 ---------------------------------------------------------------------------------------
Index-2
Q)8
Index-6
Q)9
Index-6
Q)10
Index-2
Q)11
Index-6
Q)12 ------------------------------------------------------------
Index-2