Professional Documents
Culture Documents
LOADING TECHNOLOGY
PALLETIZING TECHNOLOGY
PACKAGING TECHNOLOGY
SORTATION AND
DISTRIBUTION SYSTEMS
BEUMER
apron conveyor
BEUMER conveying technology –
The reliable solution to your conveying requirements
2
3
BEUMER apron conveyor
4
Maximum operational The technical design features of
reliability the steel cell:
The proven reliability of the com- The special shape of the steel cell • The steel cells are precisely
ponents utilized in the BEUMER is important. manufactured by the use of
apron conveyor technology the latest high technology
provides optimum trouble-free • The lateral rigidity of the cell is production methods
operation. provided by the depth of the • These precision manufacturing
formed bottom plate techniques provide for trouble-
• The increased height provides free operation
a maximum non-contact over- • The method of mounting the
lapping between the cells and support wheels with a clamping
provides an effective seal tube on the bottom of the cell
• Material integrity is guaranteed provides a positive alignment
by the shape of the cells during of the wheels and eliminates
closing any additional alignment during
• The overlapping side walls erection
prevent spillage when turning • The changing of the rollers
over the sprocket wheels during maintenance can be done
within minutes.
5
BEUMER technology – the reliable solution to your conveying requirements
6
Technical features of the The runner The silo discharge
BEUMER apron conveyor
The runners are dependent on the A segmented gate is used as a
The drive unit and the load and will meet the following discharge device between the silo
tensioning station requirements: and the steel apron conveyor.
Gravity forces cause the material to
Standard toothed sprocket • Long service life flow to the conveyor.
segments with wear reducing pitch • Wear resistance
design are of a replaceable type • Smooth operation The segmented gate is designed to
and can be reversed to provide • Dust-proof. close against a vertical material flow.
maximum wear resistance. • These requirements are strictly A dedusting device is not required
enforced during construction. in this area when the gate is used
• Safety devices to meet the as a discharge device.
specific safety regulations of the The chain
installation site.
• Loading guide with dust hood at The chain is designed as a steel
the feed point projecting into the bushed roller chain with a pitch of
cell area to control dust 315 mm.
emissions. The breaking strength of the chain
• Screw type or gravity take-ups ranges from 450kN to 2700kN and
are available. the chains are designed to work as
single or double strands.
The wide range of chain strengths
provides the ability to select exact-
ly the right chain for the service
requirements.
7
Volume flow QV in m3/h
Angle of Filling
With a conveying speed v = 0,3 m/s and a cell height h = 400 mm
inclination level
α ϕ Cell width b in mm
500 630 800 1000 1200 1400 1600 1800 2000
100% 180 235 315 420 525 650 770 905 1045
Typ I/II-28 0 – 28°
80% 144 188 252 336 420 520 616 724 836
100% 165 210 265 335 400 470 525 590 655
29°
80% 132 168 212 268 320 376 420 472 524
Typ I/II-34
100% 150 190 245 305 370 430 485 550 615
34°
80% 120 152 196 244 296 344 388 440 492
100% 160 205 260 325 390 460 520 585 645
35°
80% 128 164 208 260 312 368 416 468 516
100% 155 195 250 315 380 440 500 565 625
Typ I/II-45 40°
80% 124 156 200 252 304 352 400 452 500
100% 150 190 240 300 365 425 480 540 600
45°
80% 120 152 192 240 292 340 384 432 480
e + 122
Sp = b + 160
b
Typ I
325 310
2300
1530
1800
SH = 1100
1200
270
e = b + 420 e - 80
e + 80
e 1200 1200
2400
3000
e + 122
Typ II Sp = b + 160
b
h
325 310
2473
2205
1530
1800
SH = 1100
1100
270
The information contained in this brochure merely serves as a non-binding description of our products and is without guarantee.
Binding information, in particular relating to capacity data and suitability for specific applications, can only be provided within the framework of concrete inquiries. E107 1106