Professional Documents
Culture Documents
VS Series
™
GARDNER DENVER | VS SERIES
Efficient at full load, part load and no load conditions, the VS Series features
expertly designed airends and rotor profiles that offer industry leading
turndown and performance. We partnered with an industry leader to develop
a motor/drive/airend combination that ensures optimum energy efficiency
and turndown capability. With several models to choose from, you can better
match your needs to a specific compressor and get the best value for your
application.
25%
& SERVICE COSTS
INVESTMENT
ENERGY SAVING MAINTENANCE 10% 8%
& SERVICE COSTS
12% 5%
VARIABLE FIXED
SPEED SPEED
A variable speed A typical fixed
compressor at speed compressor
70% load operating at
70% load
58% 82%
ENERGY COST ENERGY COST
Using a variable speed compressor can easily save 25% energy by using
just the right amount of energy required to do the job and no more.
Reduce Energy.
Maximize Efficiency.
Save Money.
Savings at Part Load Savings When Air is Not Needed
The VS Series provides tremendous power savings at When air is not needed, the VS Series compressors
part load points, which save you thousands of dollars stop running and do not vent to atmosphere;
in energy costs each year. The compressor matches eliminating any waste of compressed air in the
the supply of compressed air, at the specified target reservoir. The “soft” starting capability of the
pressure, to your system’s specific demand while AirSmart™ controller allows the motor to start against a
minimizing the power required to compress the air. pressurized system at any time and will do so as often
Every area on these compressors were designed as required by the system. Our attention to this energy
so that air flows with the least possible restriction, saving detail is just another example of the energy
eliminating every possible kW. In other words, the savings delivered by Gardner Denver.
VS Series provides efficiency everywhere—full load,
part load, no load.
ONEY
M IE
N CY
SAVE
FIC
EF
M IZE
AXI
M
REDUCE ENERGY
Smarter Design
Our VS Series design utilizes ■■ FiniteElement Analysis (FEA) The benefit of going
superior technologies so each allows the strength and
package is loaded with the critical rigidity of a component to be the extra mile is a
product benefits you want. completely understood. If a weak
line of variable speed
area is identified, design changes
■■ SmartInjection Technology are made before the product is compressors that are
allows the AirSmart™ controller produced.
to maintain the discharge
■■ SolidModeling in the design
efficient and flexible,
temperature of the compressor
above the dew point to prevent phase allows these technologies providing reliable
condensate from forming in the to be applied successfully.
lubricant. In addition, product quality and stable plant air
and serviceability are greatly
■■ Computational Fluid Dynamics enhanced when viewed and
pressure for maximum
(CFD) is employed to minimize
pressure drop from the air inlet
analyzed from a solid model.
productivity.
■■ Thermography was utilized
all the way to the air discharge of
the compressor. This maximizes to maximize heat transfer
efficiency and minimizes your and ensure that cool, clean
electrical cost of operation. compressed air is delivered to
the plant.
Information at
Your Fingertips
Simplicity
The AirSmart™ controller was designed to
make the operator’s interface with the variable
speed drive transparent. You don’t need to be
an expert on variable speed drives to operate
our compressor. The controller takes care of the
details.
Ensure your
compressed air
system remains a
total package
8
Best Warranty in the Industry
Experience Peace of Mind
The engineering philosophy of Gardner Denver
ensures long-lasting, reliable equipment. Our
simple, but bold warranty programs demonstrate
our belief in the quality found in Gardner Denver
compressors.
An Extensive Network
By leveraging the extensive network of Gardner Denver
factory-trained authorized local distributors, your sales, service
and technical support needs can be handled quickly and easily.
gardnerdenverproducts.com
Specifications
VS25–250 ROTARY SCREW COMPRESSOR, 60 HZ
NOISE DIMENSIONS
DRIVE MOTOR NOMINAL PRESSURE FAD¹ WEIGHT
MODEL LEVEL² L×W×H
HP KW PSIG BAR ACFM M³/MIN DB(A) LBS KG IN. (MM)
1) Data measured and stated in accordance with ISO1217, Ed. 4, Annex C & Annex E at the following conditions:
Air Intake Pressure 1 bar A, Air Intake Temperature 20° C, Humidity 0 % (Dry)
2) Measured in free field conditions in accordance with ISO 2151, tolerance +/– 3 dB
GARDNER DENVER | VS SERIES