This document provides instructions for submitting a net metering application and modifying solar device details in the system through various steps:
1. Open the T-CODE and select the net metering application form to submit consumer details and search.
2. Upon submission, provide new device details, key date, and select prorate. Modify the register group based on parts.
3. Enter meter reading results, provide the reading and note, and save changes.
This document provides instructions for submitting a net metering application and modifying solar device details in the system through various steps:
1. Open the T-CODE and select the net metering application form to submit consumer details and search.
2. Upon submission, provide new device details, key date, and select prorate. Modify the register group based on parts.
3. Enter meter reading results, provide the reading and note, and save changes.
This document provides instructions for submitting a net metering application and modifying solar device details in the system through various steps:
1. Open the T-CODE and select the net metering application form to submit consumer details and search.
2. Upon submission, provide new device details, key date, and select prorate. Modify the register group based on parts.
3. Enter meter reading results, provide the reading and note, and save changes.
1. Open T-CODE ZHPSOLAR → Select NET METERING APPLICATION FORM radio button → Click on Submit
2. Provide consumer Id → Search
3. Provide Consumer Details → Click On Submit Button
4. On click of submit data will upload successfully and Device modification Screen will appear → Provide i. Device ii. Key Date ( should be THE DATE FROM WHICH NEW DEVICE IS INSTALLED ) iii. Select check box prorate 5. Press Enter button → change i. Modific. Reason to 01 [Change Register Group] ii. Change Register Group based on 1 part or 2 part
iii. Select Enter Button → Click on Save [ 2 times]
iv. click on enter meter reading results
6. Provide Reading and Note → Click on Back Button
7. Click On Goto → Rate data
8. Provide Rate Type
9. Provide Fact Gr.
10. Click On Back Button → Save
11. Select radio button METER READING ENTRY → Submit Button
12. Provide I. Installation Number ii. MR reason '01' → Enter
13. Select Schd MRD ( should be more than last billing date +1 month ) 14. Click on Create order
15. Provide the I. MR Recorded and Note (should be '000')