Professional Documents
Culture Documents
(Speed: 400M/MIN)
Detail Specification
地址:浙江省瑞安市经济开发区开发三路 515 号
Add:Kaifa Third Road No.515, Economic Development Zone,Ruian,
ZheJiang,China
Tel:+86 577 65191555 Fax:+86 577 65166998
M.B: +86 13757762229 Mr.Jouncy (Owner)
E-Mail:jouncy@vip.163.com Http://www.guodaroto.com
GDFQ-1300T Slitting Machine
Main Configuration
( Siemens PLC + Three Yaskawa Servo Drive Control system )
Unwind:
1. Unwind Adopt with Magnet Brake and Load Cell Auto Tension Control Through Siemens PLC
Program; Unwind is fully auto tension control ( Load Cell Auto Tension Kortis Brand / France )
2. Unwind Roll Material Paper core loading / Unloading By Pneumatic Shaft-less Type; Adopts with
both 3' & 6' inch chuck.
2-1. 3' inch chuck: 1 Set
6' inch chuck: 1 Set
3. Unwind Rack Up and Down Hydraulic Type.
Hydraulic Capacity: 2 Ton
4. With Splicing Table
Pneumatic Material Pressing Bar: 2 sets
5. Adopt with CCD Board Type Web guide, From Taiwan
Can Track Both Material Edge and printing line
2
Nip Roller & Slitting:
1. Nip Roller Drive By Synchronize Servo Motor and its Servo Driver Through Siemens PLC; It is fully
auto tension Control
Yaskawa Servo Motor: 1 PCS ( From Japan, Three Phase Voltage 220V, 50HZ)
Yaskawa Servo Driver: 1 PCS ( From Japan, Three Phase Voltage 220V, 50HZ)
Remark: Supplier Already Made One Three Phase voltage transformer for Total Three
Servo Drive system use purpose, Buyer No noeed to conside this, transformer already included with
machine.
2. Slitting With 10 Sets Razor Slitting Device
Use Japanese brand knife: Tajima
3. Adopts With Wastage Trim Blowing Device
4. Anti static Rope: 2 sets
Rewind:
1. Rewind Up Shaft & Down Shaft Drive By Separate Synchornized Servo Motor and Servo Driver
Through Siemens PLC
Yaskawa Servo Motor: 2 PCS ( From Japan, Three Phase Voltage 220V, 50HZ)
Yaskawa Servo Driver: 2 PCS ( From Japan, Three Phase Voltage 220V, 50HZ)
Remark: Supplier Already Made One Three Phase voltage transformer for Total Three
Servo Drive system use purpose, Buyer No noeed to conside this, transformer already included with
machine.
2. Rewind Adopts With Friction Slip Shaft, Tension Auto Control Through SMC Proportion value and
Siemens PLC; Rewind is fully Auto Tension.
Friction slip shaft: 2 PCS ( Each Shaft Consist of 52 pcs of Friction Slips, Each Slips Width 25mm)
3. Rewind Pressing Roller:
Rubber Pressure Roller: 2 Sets
Aluminum Pressure Roller: 2 Set
4. Infrared Laser Paper Core Position Device
Laser Lights: 10 PCS
5. Unloading Discharge Assistant Device: For Both Up and Down Rewind Shafts
6. Machine Auto Function: 6-1. Meter Auto Counting
6-2. Production Length Pre-Setting Auto Stop
6-3. Material Break Auto Stop
3
Main Parts List:
No Products Specs Quantity Brand
1 PLC 1 SET Siemens/Germany
2 Touch Screen 10' 1 PCS WEINVIEW/Taiwan
3 Unwind Load Cell 2 PCS Kortis / France
4 Unwind Load Cell Signal Enlarger 1 PCS Kortis / France
5 Nip Synchronize Servo Motor 4.4KW 1 PCS YASKAWA / Japan
6 Nip Servo Driver 4.4KW 1 PCS YASKAWA / Japan
7 Rewind Synchronize Servo Motor 4.4KW 2 PCS YASKAWA / Japan
8 Rewind Servo Driver 4.4KW 2 PCS YASKAWA / Japan
9 Proportional Valves 2 PCS SMC / JAPAN
10 Precision Valves 2 PCS SMC / JAPAN
11 EPC/LPC CCD Sensor 1 PCS Pauscource / Taiwan
EPC/LPC Driver 1 PCS Pauscource / Taiwan
EPC/LPC LED Controller 1 PCS Pauscource / Taiwan
12 Pneumatic Equipments AIRTAC/Taiwan
13 Solenoid Valve AIRTAC/Taiwan
14 Electrical Equipments SCHNAIDER/France
15 Buttons & Switches Several EATON Moeller / Germany
16 Main Circuit Breaker CHNT/China
17 Bearings Several NSK & NTN / Japan
18 Laser Lights 10 PCS China
4
Some Machine Photos At Workshop In Production Process:
A. Ready Machine
5
6
B. Rewind:
C: Unwind:
8
F. Siemens PLC
G. Servo Drive