Professional Documents
Culture Documents
Design a filter to remove noise below 10KHz. Also make sure that you get an
unattenuated output signal. Use an appropriate amplifying stage to overcome
attenuation.
Components Used:
The value of resistors and capacitors used in this case is as follows:
R = 1600 Ω
C = 10 nF
1+(R2/R1)=1.4
Gain Values:
Plots
The Bode Plot for the Magnitude is as follows:
3.5
Frequency verses gain plot
3
2.5
2
Gain in db
1.5
0.5
-0.5
-1
7.5 8 8.5 9 9.5 10 10.5 11 11.5 12 12.5
Frequency in KHz