Professional Documents
Culture Documents
Parking Area
KEY FEATURES:
• Modular scalability for charging next generation cars.
• Simultaneous charging of up to three cars.
• Up to 15A @230V charging. Residential Area
• Output power rating- 3.3KW Max.
• Input Plug Type- 3 pin Female Connector
• User friendly LCD display for customer interface
• Wired/wireless connectivity for integration with CMS.
• Battery backup for billing and data sync with CMS.
• Easy to install, operate and service.
• Safety Measures- Emergency stop button.
• Output Connector Compliance Standard-IEC 60309.
• Robust IP55 ingress protection.
• Built- in network connectivity (OCPP).
Technical Specifications
INPUT POWER
Input Voltage (AC) 3 Phase, 415 Vac(374~440Vac)
Input Frequency 50±1Hz
Wires 5 wires : L1,L2,L3,N,PE
Battery Backup 1Hr.
(Controller)
OUTPUT POWER
Number of Outputs 3 Nos.
Output Connector IEC 60309, (3 Pin Female Connector)
Output Current Max. 15 Amp, per output
Output Rating 230Vac, 50Hz, 3.3KW Max. per output
ENVIRONMENT
Ambient Temperature -30⁰C to 55⁰C
Storage Temperature -40⁰C to 70⁰C
Altitude <2000Mtr
Humidity <95%, Non-Condensing
USER INTERFACE AND CONTROL
Display 4.3 TFT LCD with touch
Language English
Push Button Emergency Stop ( mushroom headed push button)
COMMUNICATION
Charger and CMS Protocol: OCPP (Open Charge Point Protocol) Interface: Ethernet, 2G/3G/4G
MECHANICAL
Ingress Protection IP55
Enclosure Protection IK10 vandal proof
Cooling Natural cooling
Dimension(L*W*H) 380mm*530mm*150mm
Charging Stations
Parking Area
Residential Area
Key Features:
● Single Power Output up to 15kW DC with GB/T gun
● 94% power efficiency
Highway
● Wired/ wireless connectivity for integration with CMS.
● User friendly LCD display for customer interface.
● IP55 outdoor charging station
● OCPP 1.6
● Easy to install, operate and service.
● Robust IP55 ingress protection
Technical Specifications
Input Power
Input Voltage (AC) 3 Phase, 415 Vac, (374 ~ 440 Vac)
Power Factor >0.98
Efficiency 94%
Input Frequency 50±1Hz
Wires 5 Wire, L1, L2, L3, N, PE
Output Power
Number of Outputs 1 Nos.
Output Connector GB/T 20234.3
Output Current Max. 200Amp
Output Rating 15 kW (Max) at 48V/60V/72V
Environment
Ambient Temperature 0°C to 55°C
Storage Temperature 0°C to 70°C
Altitude <2000 Mtr.
Humidity <95%, non-condensing
User Interface
Display 7” TFT LCD with Touch
Buttons and Switch English
Push Button Display Wake up, Emergency Stop
User Authentication OTP/ RFID Based
Visual Indication Mains Available, Charging Status, System Error
Protection
Over Voltage, Under Voltage, Over Current, Short Circuit, Surge Protection,
Protection
Over Temperature, Ground Fault, Residual Current
Communication
Charger & Vehicle CAN Communication
Protocol: OCPP 1.6 (Open Charge Point Protocol) Interface:
Charger & CMS
Ethernet, 3G/4G
Mechanical
Ingress Protection IP55
Enclosure Protection Vandal Proof Metal Enclosure
Cooling Air Cooled
Wire Length 5 Mtr.
Dimension (WXHXD) 765 mm X 1800 mm X 400 mm
Charging Stations
Parking Area
Key Features
• Modern and stylish appearance design
• Up to 32A @ 230V charging
• Max. output power: 7.36 kW Residential Area
• IEC 62196-2 Type 2 tethered plug or Type 2 socket
• User-friendly interface and RFID authentication
• Easy for installation and wiring
• Built-in network connectivity (OCPP)
• IP55 protection and IK08 vandal-proof casing
Technical Specifications
Input Power
Input Rating 230 Vac, single phase, 16 A or 32 A maximum, 50 / 60 Hz
Number of Phase / Wire L, N and PE (Ground), hardwired with terminal block
Internal RCD 30 mA RCD and DC 6 mA RCD function
Output Power
Output Rating 230 Vac, single phase, 16 A or 32 A maximum, 50 / 60 Hz,3.68 kW or 7.4 kW max
Charging Interface IEC 62196-2 Type 2 tethered plug, 5m cable Or IEC 62196-2 Type 2 Socket
Protection
Upstream In accordance with local regulations
Over current, Under voltage, Over voltage, Residual current, Surge
Electrical Protection protection,Short circuit, Over temperature, Ground fault, Plug-out protection
Cold-Load Pickup Randomized delay before charge resume after power failure
Automatic recovery after The EVSE will automatically resume charging after a minor fault such as
nuisance trip OVP,UVP, OTP or OCP. No user intervention required.
User Interface
Status Indicators Power, Status, Charge, Fault
Buttons and Switch Key switch, On/Off switch, Reset button, Emergency stop button
Charger Configuration Charging Current Adjustment, Charging Duration Limitation
Communication
Network Interface Ethernet (standard),WLAN(option),3G(option),Ethernet(standard) for localaccess
Charging Protocol OCPP
Environment
Operating Temperature -30 ℃ to +50 ℃ (-22 ℉ to +122 ℉)
Storage Temperature -40 ℃ to +80 ℃ (-40 ℉ to +176 ℉)
Humidity < 95% relative humidity, non-condensing
Altitude Up to 2,000 m (6,000 ft.)
Mechanical
Ingress Protection IP55
Enclosure Protection IK08 according to IEC 62262
Cooling Natural cooling
Dimension (W x H x D) / 363 x 318 x 136 mm (14.3 x 12.6 x 5.4 inch), excluding charging cable, mounting
Weight plate and cable holder, 3.7kg (8.2 lbs), without package
Charging Stations
EV Fleets Services
Key Features
Input Power
Input Rating 400 Vac, 95 A maximum, 50 H
DC Output #1 IEC 61851-23 / DIN 70121, 200-500Vdc, 125A max., 50kW max.
Protection
Protection Over current, Under voltage, Over voltage, Residual current, Surge protection, Short
circuit, Over temperature, Ground fault
User Interface & Controls
Display 12” TFT-LCD screen
Charge Options Charge options to be provided upon request: Charge by duration, Charge by energy
User Authentication ISO/IEC 14443 Type A/B RFID for user authentication
Communication
Network Interface Ethernet (standard),WLAN(option),3G(option),Ethernet(standard) for local access
Environment
Operating Temperature -10 ℃ to +50 ℃ (standard);-30 ℃ to +50 ℃ (optional)
Storage Temperature -40 ℃ to +70 ℃
Humidity < 95% relative humidity, non-condensing
Altitude Up to 2,000 m (6,000 ft.)
Mechanical
Ingress Protection IP55
Enclosure Protection IK10 according to IEC 62262
Cooling Natural cooling
Dimension / Weight 900 x 1700 x 600 mm, excluding plug and cable / 645kg, without package
Regulation
Certificate / Compliance CE / CHAdeMO / IEC 61851-1 / IEC 61851-23
Charging Stations
EV Fleets Services
Key Features
Parking Area
● IP55 protection
Technical Specifications
Input Power
Input Rating 380~415 Vac; 50/60Hz; Three-phase / L1, L2, L3, N, PE
Power Factor >0.98
Current THD <5%
Efficiency >94%
Regulation
Compliance GBT 20234, GBT 27930, GBT 18487
Power Output
DC Output 300~750 Vdc, 200 A max, 120 kW
Protection
Protection Over current, Under voltage, Over voltage, Surge protection,
Short circuit, Insulation deterioration
Parking Area
Key Features
Input Power
Input Rating (1) 240 / 277Vac; 60Hz; Single-phase / L1, L2, PE or L, N, PE
(2) (2) 480Vac; 60Hz; Three-phase / L1, L2, L3, N, PE
(3) (3) 208Vac; 60Hz; Three-phase / L1, L2, L3, PE
Power Factor >0.98
Current THD Compliant with IEEE 519
Efficiency >94%
Power Output
DC Output #1 300~750 Vdc, 200 A max, 120 kW
DC Output #2 CHAdeMO, 50-500 Vdc, 60A max., 25 kW max
Protection
Protection Over current, Under voltage, Over voltage, Residual current, Surge protection,
Short circuit, Over temperature, Ground fault
User Interface & Control
Display 2.7” OLED screen
Support Language English (Other languages available upon request)
Push Button Multi-functional buttons (LED light: Orange, Blue) / Emergency stop button (Red)
Charge Options Charge options to be provided upon request,Charge by duration, Charge by energy
User Authentication ISO/IEC 14443 Type A/B RFID for user authentication
Communication
Network Interface Ethernet (standard); 3G (optional)
Protocol OCPP
Environmental
Operating Temperature -30oC to +50oC (-22oF to +122oF)
Humidity <95% relative humidity, non-condensing
Altitude Up to 2000 m (6500 ft.)
Mechanical
Ingress Protection Type 3R
Cooling Forced air
Charging Cable Length 13 ft. (4 m)
Dimension (W x D x H) 27 x 17 x 9 in. (680 x 430 x 230 mm)