Professional Documents
Culture Documents
The Echometer Well Analyzer is used in minute build-up casing pressure tests are
Acoustic liquid level Tests conjunction with a gas gun/microphone performed. The casing pressure build-up
assembly to determine the liquid level measurement allows calculation of the
depth in a well. Normally, the liquid casing annulus gas flow rate and the
level depth is determined in the casing gradient of the gaseous liquid column if
annulus, but also, the liquid level depth free gas is bubbling up through the liquid.
can be measured inside tubing in gas
wells. Software calculates the producing
bottomhole pressure, maximum
An acoustic pulse is generated at the production rates, pump intake pressure,
surface of the well. The acoustic pulse casing annulus gas flow rate and other
travels through the gas and is reflected parameters. This single shot acoustic
by changes in area including tubing liquid level depth test is displayed as
collars and the liquid level. The software shown so the operator can visualize and
automatically processes this acoustic understand the performance of the well.
data to determine liquid level depth.
Concurrent with the acoustic liquid level
depth measurement, an initial and two
, 410 West Grand Parkway South Suite 103. Katy, TX c (281)-644-0203 w upcglobal.com
Pressure transient tester
The Well Analyzer can be used with Numerous diagnostic and analysis plots
special software to obtain pressure are available including casing pressure
buildup data. The operator programs vs. time, liquid level vs. time, bottomhole
the Well Analyzer to acquire data at a pressure vs. time, log-log with derivative,
specified rate in either shots per hour or Horner plot and MDH plot.
shots per log time cycle.
Real time viewing of the data insures
Advanced analog to digital converters, that the wells are returned to production
precision pressure sensors and reliable as soon as the test objectives have been
remote fire gas guns allow acquisition of reached.
accurate data, which is used to calculate
bottomhole pressures.
, 410 West Grand Parkway South Suite 103. Katy, TX c (281)-644-0203 w upcglobal.com
plunger lift analysis
The Well Analyzer is used during the end of the shut-in time period and
the plunger lift cycle to continually determines the proper shutin time for
acquire acoustic signals generated as the plunger lift installation. Oil and gas
the plunger travels in the tubing, plus production of a plunger lift installation
acquire pressure signals from the tubing can be maximized by determining the
and casing. Key events such as plunger position and velocity of the plunger
arrival at the liquid level in the tubing throughout the cycle and calculating gas
and plunger arrival at the bottom of the and liquid flow rates into and out of the
tubing are identified. wellbore as a function of the measured
pressures.
The operator ensures that the plunger
reaches the bottom of the tubing by
CSA Certification
CSA Certification, Certificate No. 1705541 for use in Class 1, Division 1, Groups A, B, C, & D, is available at additional cost for some
of the sensors. The Well Analyzer can be modified for intrinsically safe service with the sensor located in hazardous areas. Please
request a special quote if certification is desired.
NEED ECHOMETER TRAINING? Receive customized in-house(on site) training that meets your company’s needs.
UPC Global offers a full range of courses and tools for professionals seeking to advance
Contact Us
their skills and technical progress using the Echometer equipment and software such
as Total Asset Monitor (TAM) and Total Well Management (TWM) designed to analyze
oil and gas wells.
, 410 West Grand Parkway South Suite 103. Katy, TX c (281)-644-0203 w upcglobal.com