The document discusses design issues with Type IV quarters and G+12 quarters buildings at Gandhigram. It notes that the spacing between isolated footings is too small and can be converted to combined footings or optimized. The design calculations for a combined footing do not match the 3D model. For the G+12 quarters, the time period used in earthquake load calculations needs correction, minimum column sizes should be 450mm, and the uniform distributed load intensity for wind load in the model requires change.
The document discusses design issues with Type IV quarters and G+12 quarters buildings at Gandhigram. It notes that the spacing between isolated footings is too small and can be converted to combined footings or optimized. The design calculations for a combined footing do not match the 3D model. For the G+12 quarters, the time period used in earthquake load calculations needs correction, minimum column sizes should be 450mm, and the uniform distributed load intensity for wind load in the model requires change.
The document discusses design issues with Type IV quarters and G+12 quarters buildings at Gandhigram. It notes that the spacing between isolated footings is too small and can be converted to combined footings or optimized. The design calculations for a combined footing do not match the 3D model. For the G+12 quarters, the time period used in earthquake load calculations needs correction, minimum column sizes should be 450mm, and the uniform distributed load intensity for wind load in the model requires change.