Professional Documents
Culture Documents
An approximation for the maximum submersion depth of the lifeboat can be obtained by simple energy
considerations. The maximum submersion can be approximated by the formula
(1)
NTS A4 MDES/01/kan/misc/ffb/1 1 OF 1
HD = 3.02 (the draft of the vessel is 2.862 in loaded departure condition)
Θ = 350
Lgo = 4.25 m
L = 6.5 m
M = 3800 kg
d1 = 3.25 m
V = 13 m3
ρ = 1025 kg/m3
Pg 2
Added mass calculations:
Refer “Water Entry Simulation of Free-fall Lifeboat First Report : Analysis of Motion and Acceleration” by
Makoto Arai, M. Reaz H. Khondoker, Yoshiyuki Inoue-- Journal of The Society of Naval Architects of Japan,
Vol. 178
Here, m(l) is the axial added mass and dm/dl is its derivative, which depend on axial immersion l . The axial
immersion l and the distribution of axial added mass m(l) are :
where
κ = 0.61
ρ = 1025 kg/cu.m
L = 6.5m
D = 2.72m
d1 from Eq set (1) corresponds to l = L/2 i.e. differentiating m(l) wrt l from Eq set (2) and equating it to 0.
i.e. d1 = 3.25m
Pg 3