Professional Documents
Culture Documents
FunTrivia.com
Home » Quizzes » Science Quizzes » Technology and Computers Trivia » General Technology Trivia
1. The time between cycles that your molten plastic sits in the barrel is called?
Residence Time
Down Time.
Wait Time.
Cycle Time.
NEXT>
2. When molten plastic is injected in to your mold at high speed what happens to the polymer strands?
Nothing!
They bunch up and stop flowing.
They become linear aligned.
They break.
NEXT>
3. You hear a process technician say that your part has splay. Which of these could have caused this?
NEXT>
NEXT>
https://www.funtrivia.com/playquiz/quiz3240122517da8.html 1/3
11/07/2019 Injection Molding Bits and Bites Quiz | 10 Questions
NEXT>
NEXT>
7. If my molded part does not cool enough before being ejected from the mold what happens?
It falls apart.
The part is too hot too touch.
The part warps and shrinks.
The plastic loses its color.
NEXT>
8. Why would you not mold a toothbrush with PVC(Polyvinyl chloride) plastic?
NEXT>
NEXT>
10. How does gas from molten plastic cause burning in the plastic?
NEXT>
https://www.funtrivia.com/playquiz/quiz3240122517da8.html 2/3
11/07/2019 Injection Molding Bits and Bites Quiz | 10 Questions
Submit my Answers!
https://www.funtrivia.com/playquiz/quiz3240122517da8.html 3/3