Professional Documents
Culture Documents
Body Connection 1 Connection Connection Connection Seat Packing For Flow Locking Special Cleaning and
Series Type 2/3 Type Orifice Size Handle/Actuator
Material 1 Size 2/3 Size Material Material Actuator Pattern Device Application Packaging
BH SS CF8M FNS Female NPT 2 1/8" Same as PTFE 0.19" Reinforced Yellow Handle
Connection 1 05 PTFE Sleeve
NO No No FC-01
(4.8 mm)
S4 CF8 NS Male NPT 4 1/4" Specify in the same R Reinforced G Graphite C Red Handle Mechanical NACE
PTFE 0.28" H L Yes S MR0175 F2 FC-02
way as the Connection 07 Sleeve Limit Switch
FRT Female BSPT (7.1 mm)
904L 904L 5 5/16" 1 type and size P PEEK F Green Handle Inductive
SS N
0.41" Sleeve Limit Switch
RT Male BSPT 3/8" or 10
6 6 mm (10.4 mm) Blue Handle Electromag-
J Q
Female BSPP 1/2" or 0.52" Sleeve netic Valve
FRP (for RP) 8 8 mm 13
(13.1 mm) 90° Normally Mechanical
Male BSPP Closed Spring Limit Switch
BP 10 10 mm 0.88"
(for RG) 22 (22.2 mm) CS Return Pneu- HQ and Electro-
Female Metric or matic Actua- magnetic
FMS Thread (for RG) 12 3/4"
12 mm 1.13" tor
29 Valve
Male Metric 14 mm or (28.6 mm) 90° Normally Straight
MS Thread (for RG) 14 M14 x 1.5 Inductive
1.25" Open Spring Limit Switch
Metric Tube 16 1" or 32 (31.8 mm) OS Return Pneu- NQ and Electro- 3 3-way
MTS Socket 16 mm
matic Actu- magnetic
TS Fractional Tube 18 18 mm 1.50" ator
Socket 38 (38.1 mm) Valve
1 1/4" or 90° Double
MTB Metric Tube
Butt Weld 20 20 mm or DA Acting Pne-
Tube M20 x 1.5 umatic Act-
TB Fractional
Butt Weld uator
22 22 mm or
PS Pipe Socket M22 x 1.5 180° Left end normally
Weld
24 1 1/2" or LX open spring return
PB Pipe Butt Weld M24 x 1.5 1. Standard thread pitch for metric threads are as follows: pneumatic actuator
FL Fractional 25 25 mm M10 and below: 1 mm 180° Right end normally
Tube Fitting
M12 to M24: 1.5 mm RX open spring return
Tube 27 M27 x 2 M27 and above: 2 mm pneumatic actuator
ML Metric
Fitting
Standard thread pitch should be ignored in the ordering
Nut + Gasket + 28 28 mm DX 180° Double Acting
UFB Bulge Fractional number, others should be specified. Pneumatic Actuator
Tube Nipple 32 2" or 2. FO means FITOK O-seal fittings.
32 mm FR means FITOK metal ring seal fittings. EA 90° Electric Actuator
Nut + Gasket + Note: Most configurations are available but not
UMB Metric Tube 3. For information about pneumatic and electric actuator,
Bulge Nipple please contact the authorized representative or FITOK everyone. If any questions, please contact
EX 180° Electric Actuator
Nut + Gasket + Group. FITOK group or our authorized distributors.
UPB Bulge Pipe 4. For oxygen or virulent medium service, contact the
Nipple
authorized representative or FITOK Group.
FO FO Fitting 5. Cleaning and Packaging:
FC-01: Standard cleaning and packaging for general industrial procedures.
FR FR Fitting FC-02: Special cleaning and packaging for wetted system components to ensure compliance with
product cleanliness requirements of ASTM G93 Level C.
Pressure (psig)
0
1000
1500
500
3000
3500
2000
2500
-65
-54
Features
of no visible leak
BO Series
0
-18
2-, 3-way, Angle Valves
and crossover service available
38
100
Pressure vs. Temperature
◎ One-piece body and one-piece ball stem
Temperature (°F)
Temperature (°C)
93
◎ Working temperature: -65°F to 300°F (-54°C to 148°C)
200
& 0.19" (Only 3-way, Angle) 0.28" & 0.41" (Only 2-way)
◎ 2-, 3-, 4-, 5-, 6- and 7-way models for on-off, switching
300
148
◎ In-line inspection and repair after system relieved by top entry design
0
69
34
every valve at the maximum working pressure to meet the requirement
103
138
172
207
241
Pressure (bar)
The working temperature of UHMWPE packing seat should not be higher than 65℃ (150℉).
One-piece Instrumentation Ball Valves
Ball Valves 19
20 Ball Valves Ball Valves 21
4-, 5-, 6-, 7-way Valves 4-, 5-, 6-, 7-way Valves
Pressure (bar)
2500 172 2500 172
Pressure (psig)
Pressure (bar)
2000 138 2000 138
4-, 5-way Valves Orifice: 0.41'' 4-, 5-way Valves Orifice: 0.41''
1500 103 1500 103
1000 69 1000 69
6-, 7-way Valves Orifice: 0.05'' & 0.06'' 6-, 7-way Valves Orifice: 0.05'' & 0.06''
500 34 500 34
0 0 0 0
-65 0 100 200 300 -20 0 100 200 300
Temperature (°F) Temperature (°F)
Pressure (bar)
Pressure (psig)
Pressure (bar)
2000 138 2000 138
4-way Valves Orifice: 0.28'' 4-way Valves Orifice: 0.28''
1500 103 1500 103
1000 69 1000 69
6-way Valves Orifice: 0.05'' & 0.06'' 6-way Valves Orifice: 0.05'' & 0.06''
500 34 500 34
0 0 0 0
-65 0 100 200 300 -20 0 100 200 300
Temperature (°F) Temperature (°F)
Note: 1.To prevent seat leakage, packing adjustment may be required periodically during the service life of the valve
2. A higher initial actuation torque may happen to the valves that have not been cycled for a period of time.
PTFE Packing Seat 3. Before installation, instrumentation ball valves exposed to dynamic temperature conditions may lose their
initial packing load. Stem packing adjustment should be required.
2-, 3-way, Angle Valves
Temperature (°C)
-28 -18 38 93 148
3500 241
Orifice: 0.19'' (Straight )
3000 207
Orifice: 0.05"& 0.06"& 0.09"& 0.13" (2-way, 3-way, -way)
2500 172
Pressure (psig)
Pressure (bar)
& 0.19" (Only 3-way, Angle) 0.28" & 0.41" (Only 2-way)
2000 138
Orifice: 0.28'' & 0.41'' (Angle 3-way)
1500 103
1000 69
500 34
0 0
-20 0 100 200 300
Temperature (°F)
20 Ball Valves Ball Valves 21
4-, 5-, 6-, 7-way Valves 4-, 5-, 6-, 7-way Valves
Pressure (bar)
2500 172 2500 172
Pressure (psig)
Pressure (bar)
2000 138 2000 138
4-, 5-way Valves Orifice: 0.41'' 4-, 5-way Valves Orifice: 0.41''
1500 103 1500 103
1000 69 1000 69
6-, 7-way Valves Orifice: 0.05'' & 0.06'' 6-, 7-way Valves Orifice: 0.05'' & 0.06''
500 34 500 34
0 0 0 0
-65 0 100 200 300 -20 0 100 200 300
Temperature (°F) Temperature (°F)
Pressure (bar)
Pressure (psig)
Pressure (bar)
2000 138 2000 138
4-way Valves Orifice: 0.28'' 4-way Valves Orifice: 0.28''
1500 103 1500 103
1000 69 1000 69
6-way Valves Orifice: 0.05'' & 0.06'' 6-way Valves Orifice: 0.05'' & 0.06''
500 34 500 34
0 0 0 0
-65 0 100 200 300 -20 0 100 200 300
Temperature (°F) Temperature (°F)
Note: 1.To prevent seat leakage, packing adjustment may be required periodically during the service life of the valve
2. A higher initial actuation torque may happen to the valves that have not been cycled for a period of time.
PTFE Packing Seat 3. Before installation, instrumentation ball valves exposed to dynamic temperature conditions may lose their
initial packing load. Stem packing adjustment should be required.
2-, 3-way, Angle Valves
Temperature (°C)
-28 -18 38 93 148
3500 241
Orifice: 0.19'' (Straight )
3000 207
Orifice: 0.05"& 0.06"& 0.09"& 0.13" (2-way, 3-way, -way)
2500 172
Pressure (psig)
Pressure (bar)
& 0.19" (Only 3-way, Angle) 0.28" & 0.41" (Only 2-way)
2000 138
Orifice: 0.28'' & 0.41'' (Angle 3-way)
1500 103
1000 69
500 34
0 0
-20 0 100 200 300
Temperature (°F)
22 Ball Valves Ball Valves 23
E
F
6 Thickness
7 2 H
1 2 7
8-9
C
8-9
10
10
D
11
1 11
A
3 Packing Bolt 316 SS/A276 Brass CDA 36000/B16 Alloy R-405/B164 Basic Cv Dimension, in. (mm)
Connection Orifice
Ordering Type and Size in. (mm) Straight Angle
Number A B C D E F G H
4 Panel Nut 316 SS/A276 Brass CDA 36000/B16 316 SS/A276
0.05 1.68
BO□□-FL1-00 1/16'' FITOK 0.10
5 Dishing Spring S17700/A693 (1.3) (42.7)
0.09 2.01 0.28 0.34 0.97 1/4 1.43 1.10 19/32
BO□□-FL2-02 1/8'' FITOK 0.20 0.15
6 Gland 316 SS/A276 Brass CDA 36000/B16 Alloy 400/B164 (2.4) (51.1) (7.1) (8.6) (24.6) (6.4) (36.2) (28) (15.1)
0.13 2.21 1.07
BO□□-FL4-03 0.60 0.35
7 Packing Seat PTFE/D1710 or UHMWPE/D4020 or PFA/D3307 (3.2) (56.1) (27.2)
1/4'' FITOK
2.39 1.17
8 Support Ring BO□□-FL4-05 1.40
316 SS/A276 Brass Alloy 400/B164 0.19 (60.7) 0.38 0.44 (29.7) 3/16 1.64 1.57 25/32
0.90
9 Support Disc (4.8) 2.58 (9.7) (11.2) 1.29 (4.8) (41.7) (39.9) (19.8)
BO□□-FL6-05 1.50 (32.8)
(65.5)
10 Ball Stem 316 SS/A276 Brass CDA 36000/B16 Alloy 400/B164 3/8'' FITOK
0.28 3.05 0.56 0.56 1.43 0.35 2.19 2.05 1 1/8
11 Body 316 SS/A182 Brass CDA 37700/B16 Alloy 400/B164 BO□□-FL6-07 6.00 2.00
(7.1) (77.5) (14.2) (14.2) (36.3) (9) (55.5) (52) (28.6)
Wetted Lubricant Fluorinated-based and silicone-based
BO□□-FL8-10 1/2'' FITOK 6.40 3.80
Non-wetted Lubricant Molybdenum disulfide with hydrocarbon binder coat 0.41 3.92 0.69 0.69 1.74 0.49 2.67 3.13 1 1/2
(10.3) (99.6) (17.5) (17.5) (44.2) (12.5) (67.7) (79.6) (38.1)
Note: Wetted components are listed in italic.
BO□□-FL12-10 3/4'' FITOK 12.00 4.60
For other materials, please contact FITOK Group or our authorized distributors.
0.09 2.01 0.97
BO□□-ML3-02 3 mm FITOK 0.20 0.15
(2.4) (51.1) 0.28 0.34 (24.6) 1/4 1.43 1.10 19/32
0.13 2.21 (7.1) (8.6) 1.07 (6.4) (36.2) (28) (15.1)
BO□□-ML6-03 (3.2) 0.60 0.35 (56.1) (27.2)
6 mm FITOK
2.39 1.17
BO□□-ML6-05 1.40 (60.7) (29.7)
0.19 0.38 0.44 3/16 1.64 1.57 25/32
0.90
(4.8) 2.46 (9.7) (11.2) 1.20 (4.8) (41.7) (39.9) (19.8)
BO□□-ML8-05 8 mm FITOK 1.50 (62.5) (30.5)
0.28 3.07 0.56 0.56 1.43 0.35 2.19 2.05 1 1/8
BO□□-ML10-07 10 mm FITOK 6.00 2.00
(7.1) (78.0) (14.2) (14.2) (36.3) (9) (55.5) (52) (28.6)
0.41 3.92 0.69 0.69 1.74 0.49 2.67 3.13 1 1/2
BO□□-ML12-10 12 mm FITOK 12.00 4.60
(10.3) (99.6) (17.5) (17.5) (44.2) (12.5) (67.7) (79.6) (38.1)
22 Ball Valves Ball Valves 23
E
F
6 Thickness
7 2 H
1 2 7
8-9
C
8-9
10
10
D
11
1 11
A
3 Packing Bolt 316 SS/A276 Brass CDA 36000/B16 Alloy R-405/B164 Basic Cv Dimension, in. (mm)
Connection Orifice
Ordering Type and Size in. (mm) Straight Angle
Number A B C D E F G H
4 Panel Nut 316 SS/A276 Brass CDA 36000/B16 316 SS/A276
0.05 1.68
BO□□-FL1-00 1/16'' FITOK 0.10
5 Dishing Spring S17700/A693 (1.3) (42.7)
0.09 2.01 0.28 0.34 0.97 1/4 1.43 1.10 19/32
BO□□-FL2-02 1/8'' FITOK 0.20 0.15
6 Gland 316 SS/A276 Brass CDA 36000/B16 Alloy 400/B164 (2.4) (51.1) (7.1) (8.6) (24.6) (6.4) (36.2) (28) (15.1)
0.13 2.21 1.07
BO□□-FL4-03 0.60 0.35
7 Packing Seat PTFE/D1710 or UHMWPE/D4020 or PFA/D3307 (3.2) (56.1) (27.2)
1/4'' FITOK
2.39 1.17
8 Support Ring BO□□-FL4-05 1.40
316 SS/A276 Brass Alloy 400/B164 0.19 (60.7) 0.38 0.44 (29.7) 3/16 1.64 1.57 25/32
0.90
9 Support Disc (4.8) 2.58 (9.7) (11.2) 1.29 (4.8) (41.7) (39.9) (19.8)
BO□□-FL6-05 1.50 (32.8)
(65.5)
10 Ball Stem 316 SS/A276 Brass CDA 36000/B16 Alloy 400/B164 3/8'' FITOK
0.28 3.05 0.56 0.56 1.43 0.35 2.19 2.05 1 1/8
11 Body 316 SS/A182 Brass CDA 37700/B16 Alloy 400/B164 BO□□-FL6-07 6.00 2.00
(7.1) (77.5) (14.2) (14.2) (36.3) (9) (55.5) (52) (28.6)
Wetted Lubricant Fluorinated-based and silicone-based
BO□□-FL8-10 1/2'' FITOK 6.40 3.80
Non-wetted Lubricant Molybdenum disulfide with hydrocarbon binder coat 0.41 3.92 0.69 0.69 1.74 0.49 2.67 3.13 1 1/2
(10.3) (99.6) (17.5) (17.5) (44.2) (12.5) (67.7) (79.6) (38.1)
Note: Wetted components are listed in italic.
BO□□-FL12-10 3/4'' FITOK 12.00 4.60
For other materials, please contact FITOK Group or our authorized distributors.
0.09 2.01 0.97
BO□□-ML3-02 3 mm FITOK 0.20 0.15
(2.4) (51.1) 0.28 0.34 (24.6) 1/4 1.43 1.10 19/32
0.13 2.21 (7.1) (8.6) 1.07 (6.4) (36.2) (28) (15.1)
BO□□-ML6-03 (3.2) 0.60 0.35 (56.1) (27.2)
6 mm FITOK
2.39 1.17
BO□□-ML6-05 1.40 (60.7) (29.7)
0.19 0.38 0.44 3/16 1.64 1.57 25/32
0.90
(4.8) 2.46 (9.7) (11.2) 1.20 (4.8) (41.7) (39.9) (19.8)
BO□□-ML8-05 8 mm FITOK 1.50 (62.5) (30.5)
0.28 3.07 0.56 0.56 1.43 0.35 2.19 2.05 1 1/8
BO□□-ML10-07 10 mm FITOK 6.00 2.00
(7.1) (78.0) (14.2) (14.2) (36.3) (9) (55.5) (52) (28.6)
0.41 3.92 0.69 0.69 1.74 0.49 2.67 3.13 1 1/2
BO□□-ML12-10 12 mm FITOK 12.00 4.60
(10.3) (99.6) (17.5) (17.5) (44.2) (12.5) (67.7) (79.6) (38.1)
24 Ball Valves Ball Valves 25
D
Panel Hole Panel Hole Panel Hole
E
Thickness Thickness Thickness
E
(4.8) (9.7) (11.2) (4.8) (41.7) (39.9) (19.8) H H H
2.06 1.03
BO□□-FNS4-05 0.90 0.75 (52.3) (26.2)
1/4 Female NPT
C
BO□□-FNS4-07 3.00 1.70
0.28 2.50 0.56 0.56 1.25 0.35 2.19 2.05 11/8
(7.1) (63.5) (14.2) (14.2) (31.8) (9) (55.5) (52) (28.6)
B
BO□□-FNS6-07 3/8 Female NPT 2.60 1.50
0.13 1.75 0.34 1/4 1.43 1.10 19/32 3HL Flow Pattern 2 1 3 1
BO□□-FO4-03 0.60 0.35 5H Flow Pattern 4 2 5HL Flow Pattern 4 1 2
(3.2) (44.4) (8.6) 0.94 (6.4) (36.2) (28) (15.1)
1/4 Male FO (23.9) 5 5
0.19 1.88 0.44 3/16 1.64 1.57 25/32
BO□□-FO4-05 2.40 0.90
(4.8) (47.8) 0.38 (11.2) (4.8) (41.7) (39.9) (19.8)
0.13 (9.7) 0.34 1/4 1.43 1.10 19/32
BO□□-FR4-03 0.60 0.35 3
(3.2) 2.13 (8.6) 1.09 (6.4) (36.2) (28) (15.1)
1/4 Male FR (54.1) (27.7)
0.19 0.44 3/16 1.64 1.57 25/32 5LV Flow Pattern 4 1 2
BO□□-FR4-05 2.40 0.90
(4.8) (11.2) (4.8) (41.7) (39.9) (19.8) 5
3-way Valve
0.05 1.68 0.81
BO□□-FL1-00-3L 1/16'' FITOK 0.08
(1.3) (42.7) (20.6)
0.09 2.01 0.97 0.34 1/4 1.43 1.10 19/32
BO□□-FL2-02-3L 1/8'' FITOK 0.15
(2.4) (51.1) (24.6) (8.6) (6.4) (36.2) (28) (15.1)
0.13 2.21 1.07
BO□□-FL4-03-3L (3.2) 0.35 (56.1) (27.2)
1/4'' FITOK
0.19 2.39 1.17 0.44 3/16 1.64 1.57 25/32
BO□□-FL4-05-3L 0.90
(4.8) (60.7) (29.7) (11.2) (4.8) (41.7) (39.9) (19.8)
0.28 2.89 1.43 0.56 0.35 2.19 2.05 11/8
BO□□-FL6-07-3L 3/8'' FITOK (7.1) 2.00
(73.4) (36.3) (14.2) (9) (55.5) (52) (28.6)
D
Panel Hole Panel Hole Panel Hole
E
Thickness Thickness Thickness
E
(4.8) (9.7) (11.2) (4.8) (41.7) (39.9) (19.8) H H H
2.06 1.03
BO□□-FNS4-05 0.90 0.75 (52.3) (26.2)
1/4 Female NPT
C
BO□□-FNS4-07 3.00 1.70
0.28 2.50 0.56 0.56 1.25 0.35 2.19 2.05 11/8
(7.1) (63.5) (14.2) (14.2) (31.8) (9) (55.5) (52) (28.6)
B
BO□□-FNS6-07 3/8 Female NPT 2.60 1.50
0.13 1.75 0.34 1/4 1.43 1.10 19/32 3HL Flow Pattern 2 1 3 1
BO□□-FO4-03 0.60 0.35 5H Flow Pattern 4 2 5HL Flow Pattern 4 1 2
(3.2) (44.4) (8.6) 0.94 (6.4) (36.2) (28) (15.1)
1/4 Male FO (23.9) 5 5
0.19 1.88 0.44 3/16 1.64 1.57 25/32
BO□□-FO4-05 2.40 0.90
(4.8) (47.8) 0.38 (11.2) (4.8) (41.7) (39.9) (19.8)
0.13 (9.7) 0.34 1/4 1.43 1.10 19/32
BO□□-FR4-03 0.60 0.35 3
(3.2) 2.13 (8.6) 1.09 (6.4) (36.2) (28) (15.1)
1/4 Male FR (54.1) (27.7)
0.19 0.44 3/16 1.64 1.57 25/32 5LV Flow Pattern 4 1 2
BO□□-FR4-05 2.40 0.90
(4.8) (11.2) (4.8) (41.7) (39.9) (19.8) 5
3-way Valve
0.05 1.68 0.81
BO□□-FL1-00-3L 1/16'' FITOK 0.08
(1.3) (42.7) (20.6)
0.09 2.01 0.97 0.34 1/4 1.43 1.10 19/32
BO□□-FL2-02-3L 1/8'' FITOK 0.15
(2.4) (51.1) (24.6) (8.6) (6.4) (36.2) (28) (15.1)
0.13 2.21 1.07
BO□□-FL4-03-3L (3.2) 0.35 (56.1) (27.2)
1/4'' FITOK
0.19 2.39 1.17 0.44 3/16 1.64 1.57 25/32
BO□□-FL4-05-3L 0.90
(4.8) (60.7) (29.7) (11.2) (4.8) (41.7) (39.9) (19.8)
0.28 2.89 1.43 0.56 0.35 2.19 2.05 11/8
BO□□-FL6-07-3L 3/8'' FITOK (7.1) 2.00
(73.4) (36.3) (14.2) (9) (55.5) (52) (28.6)
D
(3.2) (56.1) (27.2) Panel Hole Thickness Panel Hole Thickness
E
6 mm FITOK H H
2.39 1.17
BO□□-ML6-05-3L 0.90
0.19 (60.7) (29.7) 0.44 3/16 1.64 1.57 25/32
B
(4.8) 2.46 1.20 (11.2) (4.8) (41.7) (39.9) (19.8)
BO□□-ML8-05-3L 8 mm FITOK 0.80
(62.5) (30.5)
B
0.28 2.89 1.43 0.56 0.35 2.19 2.05 1 1/8
BO□□-ML10-07-3L 10 mm FITOK 2.00
(7.1) (73.4) (36.3) (14.2) (9) (55.5) (52) (28.6)
0.41 3.48 1.74 0.69 0.49 2.67 3.13 1 1/2 A A
BO□□-ML12-10-3L 12 mm FITOK 4.60
(10.3) (88.4) (44.2) (17.5) (12.5) (67.7) (79.6) (38.1)
0.13 1.63 0.81 0.34 1/4 1.43 1.10 19/32 1 4 5 6
BO□□-FNS2-03-3L 1/8 Female NPT 0.30
(3.2) (41.4) (20.6) (8.6) (6.4) (36.2) (28) (15.1) 4C Flow Pattern 6C Flow Pattern 4 1
0.19 2.06 1.03 0.44 3/16 1.64 1.57 25/32 2 3 3 2
BO□□-FNS4-05-3L 0.75
(4.8) (52.3) (26.2) (11.2) (4.8) (41.7) (39.9) (19.8)
1/4 Female NPT
BO□□-FNS4-07-3L 1.70 Special Flow pattern
0.28 2.46 1.18 0.56 0.35 2.19 2.05 1 1/8 2 2 2
(7.1) (62.5) (30) (14.2) (9) (55.5) (52) (28.6)
BO□□-FNS6-07-3L 3/8 Female NPT 1.50 4H Flow Pattern 3 1 4HL Flow Pattern 3 1 4V Flow Pattern 3 1
4 4 4
0.41 3.13 1.56 0.69 3/8 2.67 3.13 1 1/2
BO□□-FNS8-10-3L 1/2 Female NPT 3.50
(10.3) (79.5) (39.6) (17.5) (9.5) (67.7) (79.6) (38.1)
0.19 2.06 1.03 0.44 3/16 1.64 1.57 25/32
BO□□-FRT4-05-3L 1/4 Female BSPT 0.75
(4.8) (52.3) (26.2) (11.2) (4.8) (41.7) (39.9) (19.8)
0.28 2.46 1.18 0.56 0.35 2.19 2.05 1 1/8 Basic Dimension, in. (mm)
Orifice
BO□□-FRT6-07-3L 3/8 Female BSPT 1.50 Ordering Connection Type and Size Cv
(7.1) (62.5) (30) (14.2) (9) (55.5) (52) (28.6) in. (mm)
Number A B D E F H
0.41 3.13 1.56 0.69 0.49 2.67 3.13 1 1/2
BO□□-FRT8-10-3L 1/2 Female BSPT 3.50
(10.3) (79.5) (39.6) (17.5) (12.5) (67.7) (79.6) (38.1)
4-way Valve
4 - & 5-way Valve
0.05 1.95
BO□□-FL1-00-4C 1/16" FITOK 0.06
(1.3) (49.6)
BO□□-FL2-01-4L 0.06 2.36 1.32
1/8" FITOK 0.07 2.61 0.44 3/16 1.64 1.57 25/32
(1.6) (60) (33.5) BO□□-FL2-01-4C 1/8" FITOK
BO□□-FL2-01-5L 0.44 5/32 1.76 1.57 29/32 0.06 (66.3) (11.2) (4.8) (41.7) (39.9) (19.8)
0.08
1.85 (11.2) (4.1) (44.6) (39.9) (23.1) (1.6) 1.55
BO□□-FNS2-01-4L (47) BO□□-FNS2-01-4C 1/8 Female NPT
0.06 0.88 (39.4)
1/8 Female NPT 0.07
(1.6) 1.55 (22.4) 0.28 3.13 0.69 0.48 2.67 3.13 1 1/2
BO□□-FNS2-01-5L (39.4) BO□□-FNS8-07-4C 1/2 Female NPT 1.60
(7.1) (79.5) (17.5) (12.2) (67.7) (79.6) (38.1)
BO□□-FNS8-10-4L 0.41 3.13 1.56 0.69 0.41 2.76 2.63 1 1/2
1/2 Female NPT 3.50 6-way Valve
(10.3) (79.5) (39.6) (17.5) (10.5) (70.2) (66.7) (38.1)
BO□□-FNS8-10-5L
0.05 1.95
BO□□-FL1-00-6C 1/16" FITOK 0.06
6 - & 7-way Valve (1.3) (49.5) 0.44 3/16 1.68 1.53 29/32
0.06 2.59 (11.2) (4.8) (42.7) (38.9) (23.1)
BO□□-FL2-01-6C 1/8" FITOK 0.08
BO□□-FL1-00-6L 0.05 2.64 1.32 (1.6) (65.8)
1/16" FITOK 0.05
(1.3) (67) (33.5)
BO□□-FL1-00-7L 0.44 0.28 1.76 1.57 29/32
1. FITOK means FITOK double ferrule tube fittings.
(11.2) (7) (44.6) (39.9) (23.1)
BO□□-FL2-01-6L 0.06 2.26 0.97 2. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
1/8" FITOK 0.07 3. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change.
(1.6) (57.6) (24.7)
BO□□-FL2-01-7L For dimensions not shown above, please contact the authorized representative or FITOK Group.
Straight-pattern Valves
A vent hole in the side of the valve body makes the downstream port vent to atmosphere when the valve is closed.
26 Ball Valves Ball Valves 27
D
(3.2) (56.1) (27.2) Panel Hole Thickness Panel Hole Thickness
E
6 mm FITOK H H
2.39 1.17
BO□□-ML6-05-3L 0.90
0.19 (60.7) (29.7) 0.44 3/16 1.64 1.57 25/32
B
(4.8) 2.46 1.20 (11.2) (4.8) (41.7) (39.9) (19.8)
BO□□-ML8-05-3L 8 mm FITOK 0.80
(62.5) (30.5)
B
0.28 2.89 1.43 0.56 0.35 2.19 2.05 1 1/8
BO□□-ML10-07-3L 10 mm FITOK 2.00
(7.1) (73.4) (36.3) (14.2) (9) (55.5) (52) (28.6)
0.41 3.48 1.74 0.69 0.49 2.67 3.13 1 1/2 A A
BO□□-ML12-10-3L 12 mm FITOK 4.60
(10.3) (88.4) (44.2) (17.5) (12.5) (67.7) (79.6) (38.1)
0.13 1.63 0.81 0.34 1/4 1.43 1.10 19/32 1 4 5 6
BO□□-FNS2-03-3L 1/8 Female NPT 0.30
(3.2) (41.4) (20.6) (8.6) (6.4) (36.2) (28) (15.1) 4C Flow Pattern 6C Flow Pattern 4 1
0.19 2.06 1.03 0.44 3/16 1.64 1.57 25/32 2 3 3 2
BO□□-FNS4-05-3L 0.75
(4.8) (52.3) (26.2) (11.2) (4.8) (41.7) (39.9) (19.8)
1/4 Female NPT
BO□□-FNS4-07-3L 1.70 Special Flow pattern
0.28 2.46 1.18 0.56 0.35 2.19 2.05 1 1/8 2 2 2
(7.1) (62.5) (30) (14.2) (9) (55.5) (52) (28.6)
BO□□-FNS6-07-3L 3/8 Female NPT 1.50 4H Flow Pattern 3 1 4HL Flow Pattern 3 1 4V Flow Pattern 3 1
4 4 4
0.41 3.13 1.56 0.69 3/8 2.67 3.13 1 1/2
BO□□-FNS8-10-3L 1/2 Female NPT 3.50
(10.3) (79.5) (39.6) (17.5) (9.5) (67.7) (79.6) (38.1)
0.19 2.06 1.03 0.44 3/16 1.64 1.57 25/32
BO□□-FRT4-05-3L 1/4 Female BSPT 0.75
(4.8) (52.3) (26.2) (11.2) (4.8) (41.7) (39.9) (19.8)
0.28 2.46 1.18 0.56 0.35 2.19 2.05 1 1/8 Basic Dimension, in. (mm)
Orifice
BO□□-FRT6-07-3L 3/8 Female BSPT 1.50 Ordering Connection Type and Size Cv
(7.1) (62.5) (30) (14.2) (9) (55.5) (52) (28.6) in. (mm)
Number A B D E F H
0.41 3.13 1.56 0.69 0.49 2.67 3.13 1 1/2
BO□□-FRT8-10-3L 1/2 Female BSPT 3.50
(10.3) (79.5) (39.6) (17.5) (12.5) (67.7) (79.6) (38.1)
4-way Valve
4 - & 5-way Valve
0.05 1.95
BO□□-FL1-00-4C 1/16" FITOK 0.06
(1.3) (49.6)
BO□□-FL2-01-4L 0.06 2.36 1.32
1/8" FITOK 0.07 2.61 0.44 3/16 1.64 1.57 25/32
(1.6) (60) (33.5) BO□□-FL2-01-4C 1/8" FITOK
BO□□-FL2-01-5L 0.44 5/32 1.76 1.57 29/32 0.06 (66.3) (11.2) (4.8) (41.7) (39.9) (19.8)
0.08
1.85 (11.2) (4.1) (44.6) (39.9) (23.1) (1.6) 1.55
BO□□-FNS2-01-4L (47) BO□□-FNS2-01-4C 1/8 Female NPT
0.06 0.88 (39.4)
1/8 Female NPT 0.07
(1.6) 1.55 (22.4) 0.28 3.13 0.69 0.48 2.67 3.13 1 1/2
BO□□-FNS2-01-5L (39.4) BO□□-FNS8-07-4C 1/2 Female NPT 1.60
(7.1) (79.5) (17.5) (12.2) (67.7) (79.6) (38.1)
BO□□-FNS8-10-4L 0.41 3.13 1.56 0.69 0.41 2.76 2.63 1 1/2
1/2 Female NPT 3.50 6-way Valve
(10.3) (79.5) (39.6) (17.5) (10.5) (70.2) (66.7) (38.1)
BO□□-FNS8-10-5L
0.05 1.95
BO□□-FL1-00-6C 1/16" FITOK 0.06
6 - & 7-way Valve (1.3) (49.5) 0.44 3/16 1.68 1.53 29/32
0.06 2.59 (11.2) (4.8) (42.7) (38.9) (23.1)
BO□□-FL2-01-6C 1/8" FITOK 0.08
BO□□-FL1-00-6L 0.05 2.64 1.32 (1.6) (65.8)
1/16" FITOK 0.05
(1.3) (67) (33.5)
BO□□-FL1-00-7L 0.44 0.28 1.76 1.57 29/32
1. FITOK means FITOK double ferrule tube fittings.
(11.2) (7) (44.6) (39.9) (23.1)
BO□□-FL2-01-6L 0.06 2.26 0.97 2. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
1/8" FITOK 0.07 3. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change.
(1.6) (57.6) (24.7)
BO□□-FL2-01-7L For dimensions not shown above, please contact the authorized representative or FITOK Group.
Straight-pattern Valves
A vent hole in the side of the valve body makes the downstream port vent to atmosphere when the valve is closed.
5-way
4-way
2-way
Remark
28 Ball Valves
Mounting Dimension
45
o
45 o
45
o
Welded Vent Port Connections
Angle-pattern and 3-way Valves
45 o
45 o
M
N
N
M
N
M
Bottom Screw Panel Mounting Options
5-way
2-way
4-way
0.28
0.28
0.19
(7.1)
(7.1)
(4.8)
0.41
0.41
(10.3)
(10.3)
Orifice
(1.3~1.6)
(1.3~1.6)
(1.3~3.2)
0.05~0.06
0.05~0.06
0.05~0.13
in. (mm)
A FITOK tube fitting or a tube stub welded to the vent port is available for stainless steel vented valves.
2.00
2.00
0.88
1.25
1.25
1.25
1.63
0.63
(50.8)
(50.8)
(31.75)
(31.75)
(41.28)
(31.75)
(22.23)
(15.88)
A vent hole in the side of the valve body makes the bottom port vent to atmosphere when the valve is closed.
M3 x 0.5
M5 x 0.8
M5 x 0.8
M5 x 0.8
M5 x 0.8
M5 x 0.8
M5 x 0.8
M2.5 x 0.45
Body Connection Connection Connection Connection Seat Orifice For Flow Panel Special Cleaning and
Series 1 Type Handle/Actuator Vent Port Application Packaging
Material 1 Size 2 to 7 Type 2 to 7 Size Meterial Size Actuator Pattern Installation
Mounting Dimension
45
o
45 o
45
o
Welded Vent Port Connections
Angle-pattern and 3-way Valves
45 o
45 o
M
N
N
M
N
M
Bottom Screw Panel Mounting Options
5-way
2-way
4-way
0.28
0.28
0.19
(7.1)
(7.1)
(4.8)
0.41
0.41
(10.3)
(10.3)
Orifice
(1.3~1.6)
(1.3~1.6)
(1.3~3.2)
0.05~0.06
0.05~0.06
0.05~0.13
in. (mm)
A FITOK tube fitting or a tube stub welded to the vent port is available for stainless steel vented valves.
2.00
2.00
0.88
1.25
1.25
1.25
1.63
0.63
(50.8)
(50.8)
(31.75)
(31.75)
(41.28)
(31.75)
(22.23)
(15.88)
A vent hole in the side of the valve body makes the bottom port vent to atmosphere when the valve is closed.
M3 x 0.5
M5 x 0.8
M5 x 0.8
M5 x 0.8
M5 x 0.8
M5 x 0.8
M5 x 0.8
M2.5 x 0.45
Body Connection Connection Connection Connection Seat Orifice For Flow Panel Special Cleaning and
Series 1 Type Handle/Actuator Vent Port Application Packaging
Material 1 Size 2 to 7 Type 2 to 7 Size Meterial Size Actuator Pattern Installation