Professional Documents
Culture Documents
Espresso Espresso
Fairfax Canterbury ®
SPECIFICATIONS
Nutmeg Nutmeg
Devon ®
n
PARTS
White
SEPTEMBER 2014
Printed in U.S.A. ©2014 American Woodmark Corporation 0714 7.75M AWL95202 www.ShenandoahValueSeries.com For Store Use Only
©2014 LOWE’S and Gable Mansard Design are trademarks of LF, LLC. All are used with permission. Property of:
2
Welcome
Welcome to the Specification and Parts Guide for our Continuous Improvement
Shenandoah Value Series™. In keeping with our policy of continuous product refinement,
This guide has been formatted to make designing with Shenandoah Value Series reserves the right to change
our cabinetry clear and easy! It contains information and specifications in design and materials as conditions require.
specifications for our Shenandoah Value Series products that
make “look-ups” a snap! If you would like further clarification
about any of our products or processes, please call your
exclusive Shenandoah Value Series Customer Care
Department at 877-569-3774.
New Items
The color blue is used to highlight items which are newly available or modified for Shenandoah Value Series. All of these items are color
coded blue for easy identification and include:
New Door Style Collections: Vanity Base Cabinet Expanded SKU Offering:
• Canterbury with Nutmeg, Spice and Wheat finishes • Vanity Base: VB1234H FH, VB1534H FH, VB1834H FH,
• Fairfax with Nutmeg, Spice and Wheat finishes VB2134H FH, VB2434H 1B FH, VB3034H 1B FH &
VB3634H 1B FH
New Finish:
• Wheat is available on Fairfax and Canterbury door styles Molding and Paneling Expansion:
• LCM8 WD - Large Crown Molding
Wall Cabinet Expanded SKU Offering:
• XLCM8 WD - Extra Large Crown Molding
• Refrigerator Wall Cabinets: W3015 X 24 DP, W3024 X 24 DP
• DSCVM8 - Decorative Small Cove Molding
• Wall Top Hinge Cabinets: WTH3018 X 24 DP,
• DLCVM8 - Decorative Large Cove Molding
WTH3618 X 24 DP
• DCTM8 - Decorative Countertop Edge Molding
Redesigned Face Frames: • CCM8 WD - Classic Crown Molding Wood
• W3912, W3915 and W3918 redesigned for stacking purposes • FP9648 - Finished Paneling
Door Styles
DOOR STYLES
Door Cross Section
Tacoma
DOOR STYLES
TACOMA
Door Panel: Raised
Door Stile & Rail Width: 1 7⁄8”
Wall Door Style: Cathedral & Square
Drawer Front: Decorative Slab
Overlay: Standard Overlay Door (SOL)
Door Hinge: Standard Overlay (SOL) Hidden Hinge®
Drawer System: Engineered Wood Drawer with Side-Mounted Drawer Glides
Hardware: Decorative Hardware Strongly Recommended
FINISHES
Species: Hardwood
Door Panel: Veneer
Wall Door Style: Cathedral Square
Espresso Q1J R1J
Honey Q1H R1H
Tawny Q1T R1T
DOOR STYLES: Canterbury 7
Canterbury
DOOR STYLES
Door Cross Section
CANTERBURY
Door Panel: Raised
Door Stile & Rail Width: 1 7⁄8”
Wall Door Style: Cathedral & Square
Drawer Front: Decorative Slab
Overlay: Standard Overlay Door (SOL)
Door Hinge: Standard Overlay (SOL) Hidden Hinge
Drawer System: Engineered Wood Drawer with Side-Mounted Drawer Glides
Hardware: Decorative Hardware Strongly Recommended
FINISHES
Species: Hardwood
Door Panel: Veneer
Wall Door Style: Cathedral Square
Nutmeg Q5V R5V
Spice Q5S R5S
Wheat Q5H R5H
Glenfield
DOOR STYLES
GLENFIELD
Door Panel: Flat Panel
Door Stile & Rail Width: 1 7⁄8”
Wall Door Style: Square
Drawer Front: Decorative Slab
Overlay: Standard Overlay Door (SOL)
Door Hinge: Standard Overlay (SOL) Hidden Hinge
Drawer System: Engineered Wood Drawer with Side-Mounted Drawer Glides
Hardware: Decorative Hardware Strongly Recommended
FINISH
Species: Hardwood
Door Panel: Veneer
Espresso P1J
Honey P1H
Tawny P1T
DOOR STYLES: Fairfax 9
Fairfax
DOOR STYLES
Door Cross Section
FAIRFAX
Door Panel: Flat Panel
Door Stile & Rail Width: 1 7⁄8”
Wall Door Style: Square
Drawer Front: Decorative Slab
Overlay: Standard Overlay Door (SOL)
Door Hinge: Standard Overlay (SOL) Hidden Hinge
Drawer System: Engineered Wood Drawer with Side-Mounted Drawer Glides
Hardware: Decorative Hardware Strongly Recommended
FINISHES
Species: Hardwood
Door Panel: Veneer
Nutmeg P5V
Spice P5S
Wheat P5H
Devon
DOOR STYLES
DEVON
Species: Thermo Foil
Door Panel: Raised Panel
Door Stile & Rail Width: 2 1⁄4”
Wall Door Style: Cathedral & Square
Drawer Front: Decorative Slab
Overlay: Full Overlay Door (FOL)
Door Hinge: Full Overlay (FOL) Hidden Hinge®
Drawer System: Engineered Wood Drawer with Side-Mounted Drawer Glides
Hardware: Requires Decorative Hardware
FINISH
Species: Thermo Foil
Door Panel: MDF
Wall Door Style: Cathedral Square
White Q3WRA I3W
11
Cabinet Back
The cabinet back is made from 1⁄8” thick hardboard substrate. Inset Toe Kick
The inside cabinet surface is finished with our TuffTech finishing Inset toe kicks are made of 1⁄2” thick unfinished engineered
system. wood. Standard toe kick dimensions are 4” high and recessed
3 1⁄2”. Universal Design toe kick dimensions are 8” high and
Hanging Rails recessed 6 1⁄2” deep.
The base and vanity top hanging rail is 3⁄4” thick solid wood,
BTK8 (matching toe kick) required for installation.
mortise and tenon joined and glued into the cabinet side
panels. The wall cabinet hanging rails are 1⁄2” thick engineered Continuous Improvement
wood, glued and pinned into the cabinet back, cabinet side In keeping with our policy of continuous product refinement,
panels and top/bottom. American Woodmark reserves the right to change specifications
in design and materials as conditions require.
The drawing below illustrates and identifies the parts of a standard Shenandoah Value Series wall cabinet.
(Hardwood Doors)
(Hardwood Doors)
NOTE: Wall single square door cabinets are hinged left and can be reversed in the field.
Wall single cathedral door cabinets must be ordered hinged left or right.
STANDARD CABINET SPECIFICATIONS: Base Cabinet Construction 17
(Hardwood Doors)
(Hardwood Doors)
NOTE: Base single door cabinets are hinged left and can be reversed in the field.
Standard Overlay (SOL) Full Overlay (FOL) Door Hinge Side-Mounted Drawer Glides
Door Hinge
All steel construction with nickel-plated finish, All steel construction with nickel-plated finish, This glide system features twin self-aligning
9
⁄16” Standard Overlay hinge. Hinge allows 1 7⁄16” Full Overlay hinge. Hinge allows less side-mounted glides. They are constructed
less than 3⁄16” frame-to-door gap. Up/down than 3⁄16” frame-to-door gap. Adjustability of epoxy coated steel for quiet opening and
adjustment of 1⁄4”. Exceeds industry standard allows superior up/down adjustment of 1⁄4” closing. Rollers are made of Delrin for smooth
for durability. Standard feature on all Standard and side-to-side adjustment of 1⁄4”. Exceeds operation.
Overlay (SOL) door styles. Hinges permit doors industry standard for durability. Standard
to open to approximately 105 degrees. feature on all Full Overlay (FOL) door styles.
Hinges permit doors to open to approximately
105 degrees.
Metal Shelf Rest Base Locking Shelf Rest Mullion Shelf Rest
Wall Cabinets
Wall Cabinet Wall Cabinet Wall Cabinet
42” High 36” High 30” High
Base Cabinets
Inset Toe Kick Base Cabinet Full-Height Base Cabinet
Vanity Cabinets
Vanity Full-Height
Vanity Base Cabinet Vanity Drawer Base
Base Cabinet
Base Height Base Height
27¼
Desk Cabinets
Desk Base Cabinet Desk Drawer Cabinet File Drawer Base Kneehole Drawer
*Actual height of oven opening shown. For actual width, maximum width and maximum height dimensions,
please refer to Cut Out Dimensions Chart in specific cabinet SKU box.
These illustrations specify dimensions of the height requirements for top alignment of Wall and Tall cabinets
(Linen, Utility, Oven) installation.
Notes:
• 84” top alignment cabinet installation includes standard Wall cabinets (30 1⁄8” high) installed 53 7⁄8” above the
finished floor, allowing 17 7⁄8” clearance between the Wall cabinets and a standard countertop height of 36”.
• Tall cabinetry (Linen, Utility, Oven) is 84” high.
• When selecting cabinetry for installation above or near any appliance, refer to the appliance
manufacturer’s specifications for clearance and venting requirements.
Notes:
• 90” top alignment cabinet installation includes taller Wall cabinets (36 1⁄8” high) installed 53 7⁄8” above the
finished floor, allowing 17 7⁄8” clearance between the Wall cabinets and a standard countertop height of 36”.
• Tall cabinetry (Utility, Oven) is 90” high.
• When selecting cabinetry for installation above or near any appliance, refer to the appliance
manufacturer’s specifications for clearance and venting requirements.
STANDARD CABINET SPECIFICATIONS: Installation Guidelines 23
Notes:
• 96” top alignment cabinet installation includes full-height Wall cabinets (42 1⁄8” high) installed 53 7⁄8” above the
finished floor, allowing 17 7⁄8” clearance between the Wall cabinets and a standard countertop height of 36”.
• Tall cabinetry (Utility, Oven) is 96” high.
• When selecting cabinetry for installation above or near any appliance, refer to the appliance
manufacturer’s specifications for clearance and venting requirements.
Minimum
Cabinet Ceiling Height
Height Depth A
84” 12” 84 9
⁄16”
84” 18” 85 1
⁄4”
84” 24” 86 1
⁄2”
90” 12” 90 1
⁄2”
90” 18” 91 5
⁄16”
90” 24” 92 5
⁄16”
96” 12” 96”
96” 18” 96”
96” 24” 96”
Notes
• 96” high Utility cabinets have 4” toe kick assembly
shipped inside cabinet.
The drawings shown below illustrate the relationship between the cabinet face frame and Standard Overlay (SOL) and
Full Overlay (FOL) doors. They show the amount of the cabinet face frame that is visible when Standard Overlay doors
or Full Overlay doors are selected.
CONSTRUCTION OPTIONS
Construction Options
26 CONSTRUCTION OPTIONS: Legend
CONSTRUCTION OPTION
CONSTRUCTION OPTIONS
CODE
Cabinet Front Only Option CFO
Increased Depth Cabinet Option ID
Inverted Frame Cabinet Option IF
Matching Interior Cabinet Option MI
RTKL (Recessed Toe Kick Left)
Recessed Toe Kick Option RTKR (Recessed Toe Kick Right)
RTKB (Recessed Toe Kick Both)
Reduced Depth Cabinet Option RD
Void Door Wall Cabinet Option - NO Molding VDO-DFH (Drilled For Hinges)
VDO-SAM (Shaker Accent Molding)
Void Door Wall Cabinet Options –
VDO-SBAM (Single Bead Accent Molding)
INCLUDING Molding
VDO-TBAM (Triple Bead Accent Molding)
CONSTRUCTIONS OPTIONS
1. When the option appears, it indicates the construction option is
available for all SKU’s in the product box unless otherwise noted.
Base Cabinet
2 Doors, 2 Drawers
In this product box, all SKUs (B36, B39, B42 and B48) are CFO
B36 IF
available with Cabinet Front Only, Inverted Frame Cabinet, B39 RD
Reduced Depth Cabinet and Recessed Toe Kick options. B42 RTK
B48
Notes:
● Drawer(s) below full cabinet floor.
● Available with Reduced Depth Option (RD)
and Recessed Toe Kick (RTK).
Notes:
● This option consists of the cabinet frame, door(s),
drawer front(s), battens and hinges.
● Toe kicks are not included.
CONSTRUCTION OPTIONS: Reduced Depth Option 29
CONSTRUCTIONS OPTIONS
Reduced Depth Cabinet Option RD
The Reduced Depth Cabinet Option should be used when ordering less than standard depth cabinets. Reduced Depth cabinets are
available in 1” reductions; minimum cabinet depth is 4”.
Orders specifying Reduced Depth Option must show the total cabinet depth.
Example: Cabinet: B24
Option: RD-17 (RD – Reduce to 17” Deep)
Notes:
● There is a potential tipping hazard for Reduced Depth cabinets until they are mounted to a wall.
● Peninsula Base cabinets reduced to 11” or less will not have an inset toe kick.
● Universal Design cabinets reduced to 9” or less will not have an inset toe kick.
● All cabinets reduced to 5” or less will not have an inset toe kick.
● All cabinets reduced to 8” or less are not available with the Recessed Toe Kick Option.
● Universal Design cabinets reduced to 11” or less are not available with the Recessed Toe Kick Option (RTK).
● Reduced Depth minimum for Wall Top Hinge cabinets is 8”.
● Reduced Depth minimum for Straight Appliance Garage is 5”.
● Reduced Depth minimum for Base End Angle (BEA12FH) cabinets is 18”.
● Reduced Depth minimum for Kneehole Drawer cabinets is 12”.
● Adjustable shelves are reduced in 1” increments to match Reduced Depth Option selected on cabinet(s).
● When ordering Reduced Depth accessories, specify the depth of the cabinet for which the accessory is
intended (e.g., SK3624-RD21 would be ordered for a UT3624 X 84 RD21).
Notes:
Wall Cabinets:
● Maximum increase depth for Wall cabinets is 24”.
● Adjustable shelves are increased in 1” increments to match Increased Depth Option selected on cabinet(s).
● Increased Depth Wall cabinets up to and including 18” deep can be mounted using standard installation procedures.
● Wall cabinets increased to more than 18” deep must be stacked, floor mounted or installed over a refrigerator.
● All Increased Depth cabinets must be securely attached in one of the following combinations: to studs in back wall and
both sides OR to studs in back wall, one side and top (e.g., two adjacent cabinets or one adjacent cabinet and a wall).
Peninsula Wall (PW) and Blind Peninsula Wall (BLPW) Cabinets:
● Increased Depth PW and BLPW cabinets up to 15” deep may be mounted at ceiling height using standard installation procedures.
● PW and BLPW cabinets increased to more than 15” deep must be stacked or floor mounted.
● When mounting cabinet at ceiling height, the cabinet must be securely attached to the ceiling rafters and to at least one other
properly mounted cabinet or studs in wall.
● Additional 2” x 4” bracing may be required above ceiling if cabinets are not located directly below a rafter.
● Mount cabinet to the ceiling using mounting screws of sufficient length to go through ceiling treatment and into the rafter
at least 1”. Screws must be installed at both front and back of cabinet on 16” centers (maximum span), with at least four
screws per cabinet.
Notes:
● Recommended for cabinets at the end of a run, especially in island and peninsula designs.
● Recessed side(s) are constructed of ½” thick unfinished engineered wood and are recessed 3½” to match front of cabinet.
● Recessed Toe Kick box is not flush on non-recessed side.
● Blind Corner Base cabinets (BLB_) are only available with the Recessed Toe Kick Both Option (RTKB).
● BEA12FH Base End Angle, BPP9 Base Pantry Pull Out, BTDP9 Base Tray Divider Pull Out, TB9 and TB9 TDS cabinets
are not available with the Recessed Toe Kick Both Option (RTKB).
● Not available for cabinets with the Reduced Depth Cabinet Option
of RD-8 and lower.
● Not available for Peninsula Base cabinets with the Reduced Depth
Cabinet Option of RD-11 and lower.
● For Peninsula Base cabinets, the drawer side indicates the front
of the cabinet.
● Peninsula Base cabinets ordered with Recessed Toe Kick Option
must be secured to the floor through the cabinet bottom into
RTKL RTKR RTKB
bracing secured to the floor.
● Base Toe Kick (BTK8) required for front and any exposed side(s).
CONSTRUCTION OPTIONS: Matching Interior 31
CONSTRUCTION OPTIONS
Matching Interior Cabinet Option MI
The Matching Interior Cabinet Option is available for Wall cabinets (with exceptions noted below), Utility cabinets, Vanity Linen
cabinets and Refrigerator Return Panels. This option matches the cabinet’s interior to that of the cabinet’s exterior sides.
Notes:
● Available for Wall, Utility and Vanity Linen cabinets with the Reduced
Depth Cabinet Option (RD), Increased Depth Cabinet Option (ID) or
standard construction. Matching
● Cabinetry with the Matching Interior Cabinet Option features two- Interior
sided engineered wood TuffTech finish side panels finished to match
cabinet exterior.
● Recommended for Wall, Utility and Vanity Linen cabinets with the
Mullion Frame Door Option (MFD), Open Frame Door Option (OFD) or
Wall cabinets with the Void Door Cabinet Option (VDO).
● Not available for Appliance Garages or any Wall cabinet with a
standard matching interior.
● All finished surfaces of the Wall, Utility and Vanity Linen cabinets
will be color matched including shelves, back, interior and exterior
of returns, top and bottom, Corner Wall back post and back side of
Peninsula Wall face frames.
● Interior accessories in Matching Interior cabinets (e.g., Spice Rack Kit,
Sliding Shelves, Pantry Swing Out Kit) will remain natural finish. Matching
● The matching interior option features 3/4” shelving. Interior
Mullion Frame Door & Open Frame Door Options MFD OFD
Mullion Frame (MFD) and Open Frame (OFD) doors are ordered as a construction option and are available for many Wall cabinet
sizes, Utility and Vanity Linen cabinets. When either of these options are selected, the specified Decorative Glass Insert panel(s) are
automatically included with the cabinet(s).
Examples: Cabinet: W1530
Option: 1 MFD Tatting Glass 30” High
Cabinet: UT2424 X 90 AS
Option: 2 OFD Rice Paper Glass 36” High
Notes:
l The Mullion and Open Frame Door Option is not available on 27” wide cabinets
l The Mullion Frame or Open Frame Door Option for Utility and Vanity Linen cabinets applies to the top door(s) only.
l Mullion Frame and Open Frame Doors feature 2 1⁄4” stiles and rails.
● Order “Prepped for Glass” for customers purchasing glass independently.
● Matching Interior Cabinet Option must be ordered separately.
● Decorative Glass Insert Panels and appropriate Decorator Door Clips are shipped separately from the cabinet for field installation.
● When ordering Mullion Frame or Open Frame Doors, Shenandoah Value Series strongly recommends ordering the
Matching Interior Cabinet Option (MI) for all door styles.
CONSTRUCTION OPTIONS
Standard Profiles for MFD Cathedral and Square
● Clear glass ● Clear glass design with 1 1⁄4” wide beveled edges ● Clear seeded glass
● Tempered safety glass ● Tempered safety glass ● Laminated safety glass
● Includes CLIP DGI BAGB Decorator Door Clips ● Not recommended for Cathedral door styles ● Includes CLIP DGI BAGC Decorator Door Clips
● Clear glass design using zinc caming and 2 pair of ● Grid design using round lead-free brass caming ● Clear glass design using zinc caming
clear beveled diamonds and clear panels ● Not available for 12” high doors
● Inserts for 12” wide doors feature 1 pair of ● Tempered safety glass ● Includes CLIP DGI BAGC Decorator Door Clips
vertical clear beveled diamonds ● Inserts for 12”, 15”, 18” and 24” high doors ● Not available for Wall Top Hinge cabinets
● Inserts for 12”, 15” and 18” high doors feature 4 lites ● All sizes features three vertical caming lines,
feature 1 pair of horizontal clear beveled ● Inserts for 30” high doors feature 6 lites spacing will vary according to size
diamonds ● Inserts for 36” & 42” high doors feature 8 lites
● Includes CLIP DGI BAGC Decorator Door Clips ● Includes CLIP DGI BAGC Decorator Door Clips
● Not available for Wall Top Hinge cabinets ● Not available for Wall Top Hinge cabinets
CONSTRUCTION OPTIONS: Decorative Glass Inserts 35
CONSTRUCTION OPTIONS
Oasis Glass Keswick Glass Rice Paper Glass
● Clear glass design using zinc caming ● Clear glass design using zinc caming and center ● Rice paper laminated between clear glass panels
● Inserts for 12” high doors feature horizontal smoked glass flower pattern ● Laminated safety glass
pattern ● Not recommended for Cathedral door styles ● Includes CLIP DGI BAGC Decorator Door Clips
● Includes CLIP DGI BAGC Decorator Door Clips ● Not available for 12” high doors
● Not available for Wall Top Hinge cabinets ● Includes CLIP DGI BAGC Decorator Door Clips
● Clear glue chipped glass ● Clear ribbed glass ● Clear mosaic patterned glass
● Tempered safety glass ● Tempered safety glass ● Tempered safety glass
● Includes CLIP DGI BAGB Decorator Door Clips ● Includes CLIP DGI BAGB Decorator Door Clips ● Includes CLIP DGI BAGB Decorator Door Clips
MFD MFD
OFD Frosted OFD Grid
Glass Detail Glass Detail
⁄ ” thick panel
● 18 ⁄ ” thick panel
● 18
● Includes CLIP DGI BAGB Decorator Door Clips ● Includes CLIP DGI BAGB Decorator Door Clips
Wall Cabinets
WALL CABINETS
Dimensions
Width Height Depth
9” to 48” 12” to 42” Standard 12” or 24”
(Increased Depth & Reduced Depth
optional on select cabinets)
SKU Coding
W 30 30
Cabinet Type width in inches height in inches
(e.g., W=Wall)
CFO CFO
W942 ID W2442 ID
■ W1242 ■ MFD MFD
■ W1542 MI MI
■ W1842 ■ OFD OFD
RD RD
■ W2142 VDO VDO
Standard Wall cabinets range from
9” to 48” wide, 12” to 42” high and
are 12” deep.
Single door cathedral Standard Wall cabinets ● Three adjustable shelves ● Left door with batten
must be ordered hinged left or right. ● Three adjustable shelves
Single door square Standard Wall cabinets are
hinged left and can be reversed in the field.
For increased depth cabinets, please
refer to the installation notes listed in
the Increased Depth Construction Option
section, on page 30. Wall Cabinet Wall Cabinet
42” High, 2 Doors 36” High, 1 Door
CFO CFO
W2742 ID W936 ID
■ W3042 ■ MFD ■ W1236 ■ MFD
■ W3342 MI ■ W1536 MI
■ OFD ■ OFD
■ W3642 ■ W1836
RD RD
VDO ■ W2136 VDO
WALL CABINETS
CFO CFO CFO
W2436 ID W2736 ID W930 ID
MFD ■ W3036 ■ MFD ■ W1230 ■ MFD
MI ■ W3336 MI ■ W1530 MI
OFD ■ W3636 ■ OFD
■ W1830 ■ OFD
RD RD RD
VDO VDO ■ W2130 VDO
W2430
● Left door with batten ● Two adjustable shelves ● Two adjustable shelves
● Two adjustable shelves
● Left door with batten ● Two adjustable shelves ● Two adjustable shelves
● Two adjustable shelves
● Left door with batten l W2724 NOT available with MFD or OFD ● One adjustable shelf
● One adjustable shelf ● One adjustable shelf ● Hinged as shown
● Center door hinged left and can be reversed
in the field
WALL CABINETS
CFO CFO CFO
W3021 ID W1818 ID ■ W2418 ■ ID
W3321 MI W2118 MFD ■ W2718 MFD
W3621 RD MI ■ W3018 MI
VDO OFD OFD
RD
■ W3318 RD
VDO ■ W3618 VDO
W4218
CFO CFO
■ W3012 ID W3912 MFD
W3312 ■ MFD MI
■ W3612 MI OFD
■ OFD RD
VDO
RD
VDO
● No shelf ● No shelf
● Not drilled for adjustable shelf ● Not drilled for adjustable shelf
WALL CABINETS
ID ID
W1542 SR MI W1536 SR MI
W1842 SR W1836 SR
W2142 SR W2136 SR
● Kit in natural finish solid wood features chrome ● Kit in natural finish solid wood features chrome
Square Wall cabinets with Spice Rack are
hinged left and can be reversed in the rails and three fixed shelves rails and three fixed shelves
field.
For increased depth cabinets, please refer Wall Cabinet
to the installation notes listed in the 30” High, 1 Door with Spice Rack
Increased Depth Option Section.
ID
W1530 SR MI
W1830 SR
W2130 SR
CFO CFO
W3027 X 24 DP MI W3024 X 24 DP MFD
RD W3324 X 24 DP MI
VDO W3624 X 24 DP OFD
RD
VDO
● No shelf ● No shelf
● Not drilled for adjustable shelf ● Not drilled for adjustable shelf
● Each side of cabinet must be attached to a ● Each side of cabinet must be attached to a
cabinet, wall or Refrigerator Return Panel cabinet, wall or Refrigerator Return Panel
WALL CABINETS
CFO CFO CFO
W3015 X 24 DP MFD W3915 X 24 DP MFD ■ W3012 X 24 DP ■ MFD
W3315 X 24 DP MI MI W3312 X 24 DP MI
W3615 X 24 DP OFD OFD ■ W3612 X 24 DP ■ OFD
RD RD RD
VDO VDO VDO
cabinet, wall or Refrigerator Return Panel cabinet, wall or Refrigerator Return Panel cabinet, wall or Refrigerator Return Panel
Refrigerator Wall
12” High x 24” Deep
CFO
W3912 X 24 DP MFD
MI
OFD
RD
VDO
● No shelf
● Not drilled for adjustable shelf
● Each side of cabinet must be attached to a
A A
WTH3015 30” WTH3018 30”
WALL CABINETS
lid stays that supports door securely at any angle lid stays that supports door securely at any angle
Wall Top Hinge cabinets ordered in
up to 105° up to 105°
Cathedral Door Styles will default ● Cabinet can be flipped to open downwards and ● Cabinet can be flipped to open downwards and
to Square.
lid stay can be adjusted to support door lid stay can be adjusted to support door
Wall Top Hinge cabinets uses standard
wall door in horizontal orientation. Rail
and stile configuration and insert panel
grain direction will differ from standard
wall cabinets. Wall Top Hinge Wall Top Hinge
For increased depth cabinets, please 15” High x 24” Deep 18” High x 24” Deep
refer to the installation notes listed
in the Increased Depth Construction
Option Section.
A A
WTH3015 X 24DP 30” WTH3018 X 24DP 30”
WTH3615 X 24DP 36” WTH3618 X 24DP 36”
MI MI
WTH3015 X 24DP OFD WTH3018 X 24DP OFD
WTH3615 X 24DP RD WTH3618 X 24DP RD
VDO VDO
● No shelf ● No shelf
● Cathedral door styles default to square ● Cathedral door styles default to square
● Features one pair of factory installed field adjustable ● Features one pair of factory installed field adjustable
lid stays that supports door securely at any angle lid stays that supports door securely at any angle
up to 105° up to 105°
● Cabinet can be flipped to open downwards and ● Cabinet can be flipped to open downwards and
lid stay can be adjusted to support door lid stay can be adjusted to support door
● Each side of cabinet must be attached to a ● Each side of cabinet must be attached to a
cabinet, wall or Refrigerator Return Panel cabinet, wall or Refrigerator Return Panel
WALL CABINETS
RD RD
WMSC271842 VDO WMSC301236 VDO
● Unit must be installed between two adjacent cabinets or one cabinet and wall
cabinets or one cabinet and wall ● Lower frame opening (including shelf):
A A B B A A B B
Actual Max Actual Max Actual Max Actual Max
A Opening Opening Opening Opening C Opening Opening Opening Opening C
WCMSC241236 24” WMC301842 12¼” 20” 23¾” 28 ” 18” WMC301836 11¾” 19½” 23¾” 28 ” 18”
WCMSC271236 27” WMC302142 12¼” 20” 23¾” 28” 21" WMC302136 11¾” 19½” 23¾” 28” 21"
RD ID ID
WCMSC241236 VDO WMC301842 RD WMC301836 RD
WCMSC271236 WMC302142 MI WMC302136 MI
● Left door with batten ● Must be installed between two cabinets or a ● Must be installed between two cabinets or a
● Cabinet interior and microwave shelf opening cabinet and a wall cabinet and a wall
● Designed to accommodate microwaves ● Designed to accommodate microwaves
finished to match cabinet exterior
● 3⁄4” veneered plywood microwave shelf included with trim kit with trim kit
● A cutout exists in the door area where the 3 1⁄8” ● A cutout exists in the door area where the 3 1⁄8”
● Designed to accommodate countertop
style microwave stiles are routed to 1 5⁄8” stiles are routed to 1 5⁄8”
● Refer to appliance manufacturers ● Refer to appliance manufacturers
● Unit must be installed between two adjacent
cabinets or one cabinet and wall specifications for adequate clearances specifications for adequate clearances
● Not drilled for adjustable shelf ● Not drilled for adjustable shelf
● Lower frame opening (including shelf):
● WMC301842 and WMC302142 feature (2) ● WMC301836 and WMC302136 feature (2)
WCMSC241236: 20 3⁄4” W x 15 5⁄8” H x 17 3⁄4” D
WCMSC271236: 23 3⁄4” W x 15 5⁄8” H x 17 3⁄4” D DR1521 doors DR1515 doors
● 24” features (2) DR1218 doors
WALL CABINETS
ID ID
PW2442 MI PW3042 MFD
RD PW3642 MI
VDO OFD
RD
VDO
ID ■ ID ID
■ PW1230 ■ MFD ■ PW3030 MFD PW3027 MI
■ PW1530 MI ■ PW3630 MI RD
■ PW1830 ■ OFD PW4230 OFD VDO
PW2430 RD RD
VDO VDO
ID ID ■ ID
PW1224 MFD PW2424 1B MFD ■ PW3024 MFD
PW1824 MI MI ■ PW3624 MI
OFD OFD PW4224 OFD
RD RD RD
VDO VDO VDO
WALL CABINETS
ID ID ■ ID
PW3021 MI PW1818 MFD ■ PW2418 MFD
PW3621 RD MI ■ PW3018 MI
VDO OFD ■ PW3618 OFD
RD RD
VDO
PW4218 VDO
CFO CFO
BLW24/2742 ID BLW36/3942 ID
BLW30/3342 MFD MFD
BLW33/3642 MI MI
OFD OFD
RD RD
VDO VDO
● Refer to Blind Wall cabinet Installation Chart (field trim and install)
Single door square Blind Wall cabinets
are hinged left and can be reversed in for specifications ● Refer to Blind Wall cabinet Installation Chart
WALL CABINETS
CFO CFO CFO
BLW36/3936 ID BLW39/4236 ■ MFD ■ BLW24/2730 ID
MFD ■ BLW42/4536 MI ■ BLW27/3030 ■ MFD
MI ■ OFD ■ BLW30/3330 MI
OFD RD ■ OFD
RD
■ BLW33/3630
VDO RD
VDO BLW36/3930 VDO
● Left door with batten ● Two adjustable shelves ● Two adjustable shelves
● Two adjustable shelves ● Includes 1⁄8” panel to cover blind opening ● Includes 1⁄8” panel to cover blind opening
● Includes 1⁄8” panel to cover blind opening (field trim and install) (field trim and install)
(field trim and install) ● Refer to Blind Wall cabinet Installation Chart ● Refer to Blind Wall cabinet Installation Chart
● Refer to Blind Wall cabinet Installation Chart for specifications for specifications
for specifications ● Must order Universal Filler ● Must order Universal Filler
● Two adjustable shelves ● One adjustable shelf ● Left door with batten
● Includes 1⁄8” panel to cover blind opening ● Includes 1⁄8” panel to cover blind opening ● One adjustable shelf
(field trim and install) (field trim and install) ● Includes 1⁄8” panel to cover blind opening
● Refer to Blind Wall cabinet Installation Chart ● Refer to Blind Wall cabinet Installation Chart (field trim and install)
for specifications for specifications ● Refer to Blind Wall cabinet Installation Chart
● Must order Universal Filler ● Must order Universal Filler for specifications
● Must order Universal Filler
WALL CABINETS
Cabinet Door Cabinet Door
Width Opening Width Opening
Cabinet A B C D Cabinet A B C D
BLW24/27 24” 8 3
⁄4” 6 1
⁄4” 7
3
⁄8” BLW39/42 39” 10 3
⁄4” 6
1
⁄4” 7
3
⁄8”
BLW27/30 27” 11 3
⁄4” 6
1
⁄4” 7
3
⁄8” BLW42/45 42” 11 3
⁄4” 6
1
⁄4” 7
3
⁄8”
BLW30/33 30” 14 3
⁄4” 6
1
⁄4” 7
3
⁄8” BLW45/48 45” 13 1
⁄4” 6
1
⁄4” 7
3
⁄8”
BLW33/36 33” 17 3
⁄4” 6
1
⁄4” 7
3
⁄8” BLW48/51 48” 14 3
⁄4” 6
1
⁄4” 7
3
⁄8”
BLW36/3930 36” 20 3
⁄4” 6
1
⁄4” 7
3
⁄8”
BLW36/39 (1B) 36” 20 3⁄4” 6
1
⁄4” 7
3
⁄8”
ID ID
BLPW2442 MFD BLPW2436 MFD
MI MI
OFD OFD
RD RD
VDO VDO
ID ID
BLPW2430 1B MFD BLPW2424 1B MFD
MI MI
OFD OFD
RD RD
VDO VDO
● Left door with batten on peninsula side ● Left door with batten on peninsula side
● Two adjustable shelves ● One adjustable shelf
● Includes 1⁄8” panel to cover blind opening ● Includes 1⁄8” panel to cover blind opening
WALL CABINETS
Full Overlay Door Styles
Full Overlay door styles require decorative hardware, which has been calculated into dimensions.
*Must use these dimensions if optional Overlay Fillers will be used.
Actual Door Door Wall Space A Exposed Frame B Filler (at wall)
Cabinet Opening Door Opening Doors (2) Minimum Maximum Maximum Minimum Maximum
Cabinet Width C C D D Space Pull Space* Space Space* Minimum Maximum*
BLPW2424 1B 24” 8 3⁄4” DR1224 20 3⁄4” DR1224 26 1⁄4” 3⁄4” 27” 14 1⁄4” 15” 2 1⁄4” 3”
BLPW2430 1B 24” 8 3⁄4” DR1230 20 3⁄4” DR1230 26 1⁄4” 3⁄4” 27” 14 1⁄4” 15” 2 1⁄4” 3”
BLPW2436 24” 8 3⁄4” DR1236 20 3⁄4” DR1236 26 1⁄4” 3⁄4” 27” 14 1⁄4” 15” 2 1⁄4” 3”
BLPW2442 24” 8 3⁄4” DR1242 20 3⁄4” DR1242 26 1⁄4” 3⁄4” 27” 14 1⁄4” 15” 2 1⁄4” 3”
Actual Door Door Wall Space A Exposed Frame B Filler (at wall)
Cabinet Opening Door Opening Doors (2) Minimum Maximum Maximum Minimum Maximum
Cabinet Width C C D D Space Pull Space Space Space Minimum Maximum
BLPW2424 1B 24” 8 3⁄4” DR1224 20 3⁄4” DR1224 25 3⁄8” 1 5⁄8” 27” 13 3⁄8” 15” 1 3⁄8” 3”
BLPW2430 1B 24” 8 3⁄4” DR1230 20 3⁄4” DR1230 25 3⁄8” 1 5⁄8” 27” 13 3⁄8” 15” 1 3⁄8” 3”
BLPW2436 24” 8 3⁄4” DR1236 20 3⁄4” DR1236 25 3⁄8” 1 5⁄8” 27” 13 3⁄8” 15” 1 3⁄8” 3”
BLPW2442 24” 8 3⁄4” DR1242 20 3⁄4” DR1242 25 3⁄8” 1 5⁄8” 27” 13 3⁄8” 15” 1 3⁄8” 3”
A B A B
CW2442 12” 24” CW2436 12” 24”
CW2742 15” 27” CW2736 15” 27”
MFD MFD
CW2442 MI CW2436 MI
To ensure proper door function, CW2742 OFD CW2736 OFD
VDO VDO
cabinets or other design elements
deeper than 12” should not be placed
on either side of the Corner Wall
cabinet.
If the Corner Wall cabinet is deeper ● Three adjustable shelves ● Two adjustable shelves
than the adjacent cabinets, fillers are ● Door opening is 11 3⁄4” wide ● Door opening is 11 3⁄4” wide
● Features a DR1542 door ● Features a DR1536 door
recommended for placement left and
right of the Corner Wall to ensure
proper door operation on standard
depth wall cabinets.
For a finished, decorative look add
Overlay Fillers (Full Overlay door styles)
to Universal Fillers or Decorative Blocks
to Fluted Beaded Fillers.
WALL CABINETS
A B A B A
CW2430 12” 24” CW2424 12” 24” CWS2430 WD 30 1⁄8”
CW2730 15” 27” CW2724 15” 27” CWS2436 WD 36 1⁄8”
CWS2442 WD 42 1⁄8”
● Two adjustable shelves ● One adjustable shelf (non-removable) ● Fixed wood spin unit mounted on cabinet floor
● Door opening is 11 3⁄4” wide ● Door opening is 11 3⁄4” wide ● 30” and 36” high feature one wood spin unit
● Features a DR1530 door ● Features a DR1524 door attached to 3⁄4” adjustable shelf
● Glass Shelf Kit not available ● 42” high features two wood spin units attached to
3
⁄4” adjustable shelf
● Natural finish wood spin units feature 1” lip and
CWS2430 WD = DR1530
CWS2436 WD = DR1536
CWS2442 WD = DR1542
● Features two 18” diameter full round spin shelves ● Two adjustable shelves ● Fixed wood spin unit mounted on cabinet floor
with pole (top shelf adjustable) ● Solid wood tambour door ● Features one wood spin unit attached to 3⁄4”
● Shelves are white high strength plastic ● 11 3⁄4” wide x 26 7⁄8” high door opening adjustable shelf
● Door opening is 11 3⁄4” wide ● 11 3⁄4” wide x 15 5⁄16” high tambour frame opening ● Natural finished wood spin units feature 1” lip and
● Features a DR1530 door ● 11 3⁄4” wide x 13 11⁄16” high tambour opening (with are 18” in diameter
tambour door open) ● Solid wood tambour door
● Field trimmable in height by 1⁄ 2” at bottom ● 11 3⁄4” wide x 15 5⁄16” high tambour frame opening
WALL CABINETS
A
PWCW2430 1B 30 1⁄8”
PWCW2436 36 1
⁄8”
PWCW2442 42 1
⁄8”
MFD MI MFD
CWTS2448 MI WER2430 PWCW2430 1B MI
OFD PWCW2436 OFD
VDO PWCW2442 VDO
● Features two 18” diameter full round spin shelves ● Features two adjustable shelves ● Left door with batten on peninsula side
with pole (top shelf adjustable) ● 30” and 36” high feature two adjustable shelves
● Shelves are white high strength plastic ● 42” high features three adjustable shelves
MFD MFD
WEA1242 MI WEA1236 MI
OFD OFD
VDO VDO
Cathedral door Wall End Angle cabinets
must be ordered hinged left or right.
Square Wall End Angle cabinets are
hinged left and can be reversed in the
field. ● Requires 12” x 12” space ● Requires 12” x 12” space
● Three adjustable shelves ● Two adjustable shelves
● Features a DR1542 door ● Features a DR1536 door
MFD
WEA1230 MI
OFD
VDO
WALL CABINETS
Number Number
A of Drawers A of Openings
SDC18 18” 3 SC30 30” 5
SDC24 24” 4 SC36 36” 6
SDC30 30” 5 SC42 42” 7
SDC36 36” 6
SDC18 SC30
SDC24 SC36
SDC30 SC42
SDC36
l Designed for horizontal or vertical installation ● Designed for horizontal or vertical installation
l Vertical installation may require the use of fillers ● Vertical installation may require the use of fillers
and/or molding which must be ordered separately and/or molding which must be ordered separately
l Features veneered engineered wood with exterior ● Opening size is 5” wide x 4 1⁄ 2” high (horizontal)
l Wood door styles feature matching wood knobs to match cabinet exterior
l Thermo Foil door styles feature white ● Interior finished to match cabinet exterior
cabinet drawers
● Interior finished to match cabinet exterior ● Interior finished to match cabinet exterior ● Interior finished to match cabinet exterior
● Use with 11 1⁄2” diameter (or smaller) dinner plates ● Wine bottle opening is 4” x 4” ● Standard cabinet sides are 1⁄2” engineered wood
● Spindles can be removed for cleaning with TuffTech finish
● Spindles shipped uninstalled ● Features 3⁄4” veneered plywood partitions
● Accent Molding recommended – order separately ● Cabinet must be installed between two adjacent
● Use of Accent Molding will reduce available plate cabinets or one cabinet and wall
diameter to 11” ● Accent Molding recommended – order separately
Left is shown
● Interior finished to match cabinet exterior ● Interior finished to match cabinet exterior ● Interior finished to match cabinet exterior
● Invert for left or right ● Must be ordered as right or left – NOT ● Invert for left or right
● Features 1⁄ 2” veneered engineered wood back and reversible ● Features 1⁄ 2” veneered engineered wood back and
engineered wood with 3” radius engineered wood (bottom shelf with 3” radius) engineered wood
● 30” and 36” high feature two 3⁄4” veneered ● 30” and 36” high feature two 3⁄4” veneered ● 30” and 36” high feature two 3⁄4” veneered
engineered wood shelves with 3” radius engineered wood shelves with 3” radius engineered wood shelves with 3” radius
● 42” high features three shelves ● 42” high features three shelves ● 42” high features three shelves
● 1 1⁄8” screw recommended from inside of adjacent ● 1 1⁄8” screw recommended from inside of adjacent ● 1 1⁄8” screw recommended from inside of adjacent
WALL CABINETS
Number
A B A of Shelves
AG2418 12” 24” WFP330 30 1
⁄8” 4 (3 adjustable)
AG2718 15” 27” WFP336 36 1
⁄8” 5 (4 adjustable)
WFP342 42 1
⁄8” 6 (5 adjustable)
ID
AGS24 RD AG2418 WFP330
AG2718 WFP336
WFP342
● Solid wood tambour door ● Solid wood tambour door ● Must be installed between two wall cabinets
● Installs below minimum 24” wide Wall cabinet ● Installs below CW and CWS Corner Wall cabinets behind the face frames in 3” of wall space
● 17 3⁄4” wide x 15 5⁄16” high tambour frame opening
● 11 3⁄4” wide x 15 5⁄16” high tambour frame opening
● Cannot be installed next to an appliance or at the
● 17 3⁄4” wide x 13 11⁄16” high tambour opening (with ● 11 3⁄4” wide x 13 11⁄16” high tambour opening (with end of a run
tambour door open) tambour door open) ● No side panels
● Shipped with end panels unattached ● Shipped with end panels unattached ● Filler shipped unattached for field installation
● Reduced Depth minimum is 5” ● Reduced Depth minimum is 5” ● An overlay filler is recommended for Full Overlay
● Field trimmable in height to 17 3⁄8” ● Field trimmable in height to 17 3⁄8” door styles – order separately
● Features full-access ball bearing glides
A A B A B
RH3024 T 30” RH3624 SV 37 3⁄4” 18
1
⁄2” RH3624 AV 37 3⁄4” 18
1
⁄2”
RH3624 T 36” RH4224 SV 43 ⁄4” 24
3 1
⁄2” RH4224 AV 43 ⁄4” 24
3 1
⁄2”
● Must be installed between two wall cabinets ● Wall mounted installation only ● Wall mounted installation only
● Silver metallic liner included ● Silver metallic liner included ● Silver metallic liner included
● Liner dimensions: ● Liner dimensions: ● Liner dimensions:
30”: 29 15⁄16” wide x 16 1⁄2” deep x 4” high 36”: 34 3⁄8” wide x 18 1⁄4” deep x 4” high 36”: 34 3⁄8” wide x 18 1⁄4” deep x 6” high
36”: 35 15⁄16” wide x 16 1⁄2” deep x 4” high 42”: 40 3⁄8” wide x 18 1⁄4” deep x 4” high 42”: 40 3⁄8” wide x 18 1⁄4” deep x 6” high
● Order range hood blower separately ● Order range hood blower separately ● Order range hood blower separately
● May be accessorized with Range Hood ● May be accessorized with Range Hood
A B Doors A B Doors A B
WRH3024 SV 30” 24" (2) DR1515 WRH3024 AV 30” 24" (2) DR1515 RHC3623 17 3
⁄8” 23 1⁄2”
WRH3030 SV 30” 30" (2) DR1521 WRH3030 AV 30” 30" (2) DR1521 RHC4223 23 3
⁄8” 23 1⁄2”
WRH3624 SV 36” 24" (2) DR1815 WRH3624 AV 36” 24" (2) DR1815 RHC3631 17 ⁄8” 31 1⁄2”
3
WRH3630 SV 36” 30" (2) DR1821 WRH3630 AV 36” 30" (2) DR1821 RHC4231 23 3⁄8” 31 1⁄2”
● Must be installed between two wall cabinets ● Must be installed between two wall cabinets ● Field trimmable in height
● Range Hood doors will match door style ordered ● Range Hood doors will match door style ordered ● Features 3⁄4” solid wood finished to match cabinet
● Door opens to allow for duct work installation and ● Door opens to allow for duct work installation and exterior
wiring wiring ● Includes two chimney mounting blocks with metal
30”: 29 15⁄16” wide x 16 1⁄2” deep x 4” high 30”: 29 15⁄16” wide x 16 1⁄2” deep x 4” high Range Hood
36”: 35 15⁄16” wide x 16 1⁄2” deep x 4” high 36”: 35 15⁄16” wide x 16 1⁄2” deep x 4” high
● Order range hood blower separately ● Order range hood blower separately
WALL CABINETS
RHVENT 250 RHVENT 390 RHVENT 500
● Designed for vented installation where exhaust is ● Designed for vented installation where exhaust is ● Designed for vented installation where exhaust is
vented to exterior of home vented to exterior of home vented to exterior of home
● Durable, powder-coated silver finish ● Durable, powder-coated silver finish ● Durable, stainless steel with brushed finish
● Features a two-speed motor and enclosed light ● Features a multi-speed fan and enclosed light ● Features a multi-speed fan and enclosed light
level of 8.0 sones and sound level of 5.5 sones and sound level of 8.0 sones
● Includes one-piece washable aluminum mesh filter ● Includes one-piece washable aluminum mesh filter ● Includes two 12V 20W halogen lamps
● Requires 7” round duct for venting to exterior ● Requires 6” round duct for venting to exterior ● Includes two washable filters with stainless steel covers
(not included) (not included) ● Requires 6” round duct for venting to exterior
● Installation and care instructions included ● Installation and care instructions included (not included)
● Liner not included ● Liner not included ● Installation and care instructions included
● Designed for recirculating installation where ● Designed for recirculating installation where
exhaust is vented back into kitchen exhaust is vented back into kitchen
● Includes ductwork, metal soffit air grille, charcoal ● Includes ductwork, metal soffit air grille, charcoal
● Features a two-speed motor and enclosed light ● Features a multi-speed fan and enclosed light
● 3” x 10” cutout required for metal grille ● 3” x 10” cutout required for metal grille
A B
WALL CABINETS
● Liner is silver metallic powder-coated metal ● Liner is silver metallic powder-coated metal
● For use with RH__T, WRH__SV or WRH__AV ● For use with RH__ SV (liner included with Range
(liner included with Range Hood) Hood)
A B A B
RHLINER 36A 34 3⁄8” 7 7
⁄16” SRK15 9 1
⁄2” 10 1
⁄2”
RHLINER 42A 40 3⁄8” 10 7
⁄16” SRK18 12 1
⁄2” 13
1
⁄2”
SRK21 15 1
⁄2” 16
1
⁄2”
A
GSK__-6 7
7
⁄16”
GSK__-9 4
7
⁄16”
WALL CABINETS
GSK12 GSK33 GSK12-6 GSK12-9 SUC36T
GSK15 GSK36 GSK15-6 GSK15-9
GSK18 GSKCW24 GSK18-6 GSK18-9
GSK21 GSKCW27 GSK21-6 GSK21-9
GSK24 GSKWEA12 GSK24-6 GSK24-9
GSK27 GSK27-6 GSK27-9
GSK30 GSK30-6 GSK30-9
GSK33-6 GSK33-9
GSK36-6 GSK36-9
● For use in 12” deep wall cabinets ● For use in wall cabinets reduced to 6” or 9” deep ● Field trimmable
● Glass Shelf Kit includes two 1⁄4” high-strength ● Glass Shelf Kit includes two 1⁄4” high-strength ● Installs below wall cabinet up to 36” wide
tempered glass shelves tempered glass shelves ● Features solid wood finished to match cabinet
● Kit does not include shelf rests ● Kit does not include shelf rests exterior
● Refer to individual SKU box for number of shelves ● Refer to individual SKU box for number of shelves ● Unassembled
required and/or available required and/or available ● Lower shelf is 4 1⁄4” deep
● GSK12 – GSK36: 10 7⁄16” deep ● Tempered glass cannot be field trimmed ● Not sized to fit modified depth cabinets
SGH36U WR36
● For installation below 36” wide wall cabinet ● Field trimmable to 24” (five bottles) or 30” (six
● Field trimmable for installation below 30”, 24” or bottles)
18” wide wall cabinets ● Features solid wood finished to match cabinet
Base Cabinets
BASE CABINETS
Dimensions
Width Height Depth
6” to 48” 34 ⁄2” 24” 1
SKU Coding
B 30 1B
Cabinet Type width in inches Door Type
(e.g., B=Base)
CFO CFO
B12 IF B24 1B IF
B15 RD B30 1B RD
B18 RTK B33 1B RTK
B21 B36 1B 1TD
BASE CABINETS
B24
CFO CFO
B27 IF B36 1B IF
B30 RD RD
B33 RTK RTK
B36 1TD
CFO CFO
B36 IF B45 IF
B39 RD RD
B42 RTK RTK
B48
BASE CABINETS
● Half-depth adjustable shelf ● Half-depth adjustable shelf
● Center support for shelf provided ● Center support for shelf provided
● Hinged as shown – center door can be reversed in
the field
RD RD
B12 SS1 RTK B24 1B SS1 RTK
B15 SS1
BASE CABINETS
B18 SS1
B21 SS1
B24 SS1
RD RD
B27 SS1 RTK B36 SS1 RTK
B30 SS1 B39 SS1
B33 SS1 B42 SS1
B36 SS1 1TD B48 SS1
● Sliding Shelves in center position are not ● Sliding Shelves in center position are not
adjustable adjustable
● Engineered wood Sliding Shelves included ● Engineered wood Sliding Shelves included
RD RD RD
B45 SS1 RTK B12 SS2 RTK B24 1B SS2 RTK
B15 SS2
BASE CABINETS
B18 SS2
B21 SS2
B24 SS2
● Sliding Shelves in center position are not ● Sliding Shelves are not adjustable ● Left door with batten
adjustable ● Engineered wood Sliding Shelves included ● Sliding Shelves are not adjustable
● Hinged as shown – can be reversed in the field ● Engineered wood Sliding Shelves included
RD RD RD
B30 1B SS2 RTK B36 1B SS2 RTK B27 SS2 RTK
B33 1B SS2 B30 SS2
B36 1B 1TD SS2 B33 SS2
B36 SS2 1TD
● Left door with batten ● Left door with batten ● Sliding Shelves are not adjustable
● Sliding Shelves are not adjustable ● Sliding Shelves are not adjustable ● Engineered wood Sliding Shelves included
● Engineered wood Sliding Shelves included ● Engineered wood Sliding Shelves included
RD RD RTK
B36 SS2 RTK B45 SS2 RTK B12 ROTD
B39 SS2 B15 ROTD
BASE CABINETS
B42 SS2
B48 SS2
● Sliding Shelves are not adjustable ● Sliding Shelves are not adjustable ● Organizer in natural finish solid wood, wood veneer
● Engineered wood Sliding Shelves included ● Hinged as shown – can be reversed in the field and dovetail (front only) construction with MDF
● Engineered wood Sliding Shelves included bottom and Side-Mounted Drawer Glides
● No shelf
(two partitions)
● Partition(s) are field installed
Base Pot and Pan Base Pot and Pan Base Pot and Pan
Organizer Cabinet Organizer Cabinet Organizer Cabinet
1 Door, 1 Drawer 2 Doors with Batten,, 1 Drawer 2 Doors with Batten,, 2 Drawers
ORY
FACTALLED ORY ORY
FACTALLED FACTALLED
INST N S T N S T
I I
IF IF IF
B24 BPPO RTK B24 1B BPPO RTK B36 1B BPPO RTK
B30 1B BPPO
B33 1B BPPO
B36 1B 1TD BPPO
● Organizer in natural finish solid wood, wood veneer ● Left door with batten ● Left door with batten
and dovetail (front only) construction with MDF ● Organizer in natural finish solid wood, wood veneer ● Organizer in natural finish solid wood, wood veneer
bottom and Side-Mounted Drawer Glides and dovetail (front only) construction with MDF and dovetail (front only) construction with MDF
● Top shelf measures 6 3⁄16” deep bottom and Side-Mounted Drawer Glides bottom and Side-Mounted Drawer Glides
● Middle shelf measures 9 3⁄4” deep ● Top shelf measures 6 3⁄16” deep ● Top shelf measures 6 3⁄16” deep
● Middle shelf measures 9 3⁄4” deep ● Middle shelf measures 9 3⁄4” deep
IF IF
BWBT15 RTK BWBT15-2 RTK
BWBT18-2
BASE CABINETS
● Features one white plastic 35 quart capacity bin ● BWBT15-2 features two white plastic 27 quart
● Wastebasket rests in a natural maple plywood frame capacity bins
● Frame slides on full-access glides ● BWBT18-2 features two white plastic 35 quart
for BWBT18-2
RTK RTK
B18 CBDR B15 PBDSU
B18 PBDSU
● Cutting Board Door Rack Kit packaged separately for ● Plastic Bag Door Storage Unit packaged separately
field installation for field installation
● Kit in natural finish solid wood features chrome rails ● Unit in natural finish solid wood and wood veneer
● Cannot be used with Sliding Shelves ● Cannot be used with Sliding Shelves
● Solid wood cutting board is NOT dishwasher safe ● Removable white plastic tray is NOT dishwasher safe
CFO CFO
TB9 RD B12 FH RD
RTK B15 FH RTK
B18 FH
B21 FH
BASE CABINETS
CFO
B24 1B FH RD
B30 1B FH RTK
B36 1B FH
A
BPP9 9”
BPP12 12”
RD RTK
TB9 TDS RTK BPP9
BPP12
BASE CABINETS
● Full-height door ● Full-height door
● Full-depth adjustable shelf ● One fixed and three adjustable shelves with
● TD3 Cabinet Tray Divider packaged separately for chrome rails
Full-Height Base Cabinets are 34 1/2” High
by 24’’ Deep and range from 9’’ to 30’’ field installation ● Features three individual heavy-duty full
Cathedral doors are not available on Option ● BPP9 is not available with Recessed Toe Kick Both
RTK RD
BTDP9 B18 FH SS2 RTK
Option
RD RD RD
B24 1B FH SS2 RTK B18 FH SS4 RTK B24 1B FH SS4 RTK
B30 1B FH SS2 B30 1B FH SS4
BASE CABINETS
● Left door with batten ● Full-height doors ● Left door with batten
● Full-height doors ● Features four Sliding Shelves ● Full-height doors
● Features two Sliding Shelves ● Features four Sliding Shelves
RTK RTK
BWBT15 FH BWBT21-2 FH
● Frame slides on Full-Access glides, not available with ● Frame slides on Full-Access glides, not available with
CushionClose CushionClose
● Includes bag storage tray at rear ● Decorative hardware strongly recommended
CFO CFO
DB12 DB27 RD DB12 4DWR RD
DB15 DB30 RTK DB15 4DWR RTK
DB18 DB33 DB18 4DWR
BASE CABINETS
DB21 DB36 1TD DB21 4DWR
DB24 DB24 4DWR
Drawer Base cabinets are 34 1⁄2” high by
24” deep and range from 12” to 36” wide.
Inset toe kick construction requires BTK8 ● One standard and two large drawers ● One large and three standard drawers
matching toe kick – must be ordered
separately.
CFO
DB36 RD
RTK
● RD ● RD
PB12 ● RTK PB24 1B ● RTK
PB18
PB24
BASE CABINETS
of drawers
● PB42 features two panels on opposite side
of drawers
RD RD
PB12 FH RTK PB24 1B FH RTK
PB18 FH PB30 1B FH
PB36 1B FH
BASE CABINETS
Peninsula Base cabinets are 34 1⁄2” high by
24” deep and range from 12” to 42” wide.
Cathedral doors are not available on ● Full-depth adjustable shelf ● Full-depth adjustable shelf
Peninsula Base cabinets. ● Left doors with battens
RD RD
SB18 RTK SB24 1B RTK
SB21 SB30 1B
SB24 SB33 1B
BASE CABINETS
SB36 1B
are hinged left and can be reversed in installation materials for adequate clearance and required
the field. installation materials
Inset toe kick construction requires BTK8
matching toe kick – must be ordered
separately. Sink/Range Base Sink/Range Base
2 Doors, 1 Panel 2 Doors, 2 Panels
door operation. for adequate clearance and required for adequate clearance and required
installation materials installation materials
RD RD A A C C
SB45 RTK DSB30 1B RTK Cut Out Min. Max. B FOL SOL
DSB36 1B
DSB30 1B 23 3⁄4” 27
15
⁄16” 2 7⁄8” 9 7⁄8” 11
1
⁄4”
DSB36 1B 29 3⁄4” 33
15
⁄16” 2 7⁄8” 9 7⁄8” 11
1
⁄4”
BASE CABINETS
● No shelf ● Left door with batten
● Full-height back ● Accommodates most farm sinks
● Subtract 1 1⁄ 2” from width and depth for available ● Stiles at apron are 3 1⁄8” wide and trimmable
sink bowl opening ● A cutout exists in the door area where the 3 1⁄8” stiles are routed to 1 5⁄8”
● Hinged as shown – can be reversed in the field ● Refer to sink manufacturer’s specifications for adequate clearance and required
36˝ 12˝
12˝
CFO
UB60 RD CSB36
RTK
● No shelves ● No shelf
● Open area for plumbing access ● Sides are finished
● Subtract 1 1⁄2” from depth and dimension 36” for ● Cabinet requires a minimum of 34” to fit through doorway
available sink bowl opening● ● ● Additional space recommended if appliance is installed on either side of this cabinet for proper appliance
installation materials ● Maximum sink width is 25 3⁄4” if cut out is 4” back from face of front frame
installation materials
Shenandoah Value Series™ Specification Guide
86 BASE CABINETS: Sink/Range Front
Sink/Range Front Sink/Range Front Sink/Range Front
1 Door, 1 Panel 2 Doors with Batten, 1 Panel 2 Doors, 1 Panel
SF21 SF36
SF24
● Sink/Range Front not trimmable ● Left door with batten ● Sink/Range Front not trimmable
● Order floors and returns separately ● Sink/Range Front not trimmable ● Order floors and returns separately
(trimming may be required) – refer to Panel ● Order floors and returns separately (trimming may be required) – refer to Panel
Section for availability (trimming may be required) – refer to Panel Section for availability
Section for availability
SF39 SF45 A B
SF42 CSF36 35
31
⁄32” 16 15⁄16”
SF48 CSF42 42
11
⁄32” 25 15⁄16”
CSF36
CSF42
RD RD
Stainless Plastic RTK Stainless Plastic RTK
SB18 STO SB18 TO SB24 1B STO SB24 1B TO
SB21 STO SB21 TO SB30 1B STO SB30 1B TO
BASE CABINETS
SB24 STO SB24 TO
available sink bowl opening ● Subtract 1 1⁄ 2” from width and 3 3⁄4” from depth for
● Tilt-Out Trays are NOT dishwasher safe available sink bowl opening
● Refer to sink manufacturer’s specifications ● Tilt-Out Trays are NOT dishwasher safe
Hidden Hinges.
Sink Base cabinets with Factory Installed
Accessories are 341⁄2” high by 24” deep
and range from 18” to 48” wide.
Cathedral doors are not available on
Sink Base cabinets with Factory Installed
Accessories.
Single door Sink Base cabinets with
Factory Installed Accessories are hinged
left and can be reversed in the field.
Inset toe kick construction requires BTK8 RD RD
Stainless Plastic RTK Stainless Plastic RTK
matching toe kick – must be ordered SB27 STO SB27 TO SB33 1B STO SB33 1B TO
separately. SB30 STO SB30 TO SB36 1B STO SB36 1B TO
available sink bowl opening ● Subtract 1 1⁄ 2” from width and 3 3⁄4” from depth for
● Tilt-Out Trays are NOT dishwasher safe available sink bowl opening
● Refer to sink manufacturer’s specifications ● Tilt-Out Trays are NOT dishwasher safe
RD RD
Stainless Plastic RTK Stainless Plastic RTK
SB33 STO SB33 TO SB39 STO SB39 TO
SB36 STO SB36 TO SB42 STO SB42 TO
BASE CABINETS
● No shelf ● No shelf
● Full-height back ● Full-height back
● Subtract 1 1⁄ 2” from width and 3 3⁄4” from depth for ● Subtract 1 1⁄ 2” from width and 3 3⁄4” from depth for
for adequate clearance and required for adequate clearance and required
installation materials installation materials
BASE CABINETS
RTK RTK
SBMS30 1B STO SBMS36 1B STO
Unit (SBDSU15) on left door, Plastic Bag Door Unit (SBDSU18) on left door, Plastic Bag Door
Storage Unit (PBDSU15) on right door and one Storage Unit (PBDSU18) on right door and two
Stainless Tilt-Out Tray (STO TRAY 22) Stainless Tilt-Out Trays (STO TRAY 11)
● Sink Base Multi-Storage Shelf (SBMSS) shipped ● Sink Base Multi-Storage Shelf (SBMSS) shipped
separately for field installation left or right separately for field installation left or right
● Sink Base Multi-Storage Shelf measures ● Sink Base Multi-Storage Shelf measures
8 3⁄16” wide x 8” high x 17 1⁄2” deep 8 3⁄16” wide x 8” high x 17 1⁄2” deep
● Subtract 1 1⁄ 2” from width and 3 3⁄4” from depth for ● Subtract 1 1⁄ 2” from width and 3 3⁄4” from depth for
for adequate clearance and required for adequate clearance and required
installation materials installation materials
CFO
BASE CABINETS
BLB36/39 RD
BLB39/42 RTK
Blind Corner Base cabinets are 34 1⁄2” high BLB42/45
by 24” deep. The visible width of these BLB45/48
cabinets ranges from 13 3⁄8” to 28” wide. BLB48/51
separately. ● Includes 1⁄8” panel to cover blind opening (field trim and install)
● Door and drawer can be reversed in the field as blind sections are identical
BASE CABINETS
Full Overlay (FOL) Door Styles
Full Overlay door styles require decorative hardware, which has been calculated into dimensions.
*Dimension requirements do not include optional Overlay Fillers – add 7⁄8” if Overlay Fillers will be used, except for BLB48/51 add 1⁄8”.
Actual Wall Space A Exposed Frame B
Cabinet Door Minimum Maximum Maximum Minimum Maximum
Cabinet Width Opening Door Space* Pull Space Space* Space
BLB36/39 27” 8 3⁄4” DR1224 38 1⁄4” 1 3⁄4” 40” 14 1⁄4” 16”
BLB39/42 33” 11 3⁄4” DR1524 41 1⁄4” 1 3⁄4” 43” 17 1⁄4” 19”
BLB42/45 39” 14 3⁄4” DR1824 44 1⁄4” 1 3⁄4” 46” 20 1⁄4” 22”
BLB45/48 45” 17 3⁄4” DR2124 47 1⁄4” 1 3⁄4” 49” 23 1⁄4” 25”
BLB48/51 48” 17 3⁄4” DR2124 48” 4” 52” 24” 28”
RD
PBC24
PBC24 1B
BASE CABINETS
BASE CABINETS
NOTE: For front view illustration, refer
Cathedral doors are not available on to Shenandoah Value Series 20-20
Corner Base cabinets. catalog.
Inset toe kick construction requires BTK8
matching toe kick – must be ordered
separately.
Cabinet requires a minimum of 34” to fit
through doorway.
Front Frame
Opening
A B C
BER33 33” 20 1⁄2” 10 7⁄16”
BER36 36” 23 1⁄2” 14 5⁄8”
Corner Base, the cabinet should be ● Doors open 170 degrees ● Doors open 170 degrees
hinged left). ● Cabinet requires a minimum of 34” to fit through ● Cabinet requires a minimum of 34” to fit through
doorway doorway
● Additional space recommended if appliance is ● Additional space recommended if appliance is
installed on the hinge side of this cabinet for installed on the hinge side of this cabinet for
proper door operation proper door operation
● Front frame opening dimension A =12 11⁄16”
● Fixed wood spin unit mounted on cabinet floor ● Fixed wood spin unit mounted on cabinet floor ● BSS33 features two 28” diameter white spin
● Features one wood spin unit attached to 3⁄4” ● Features one wood spin unit attached to 3⁄4” shelves with pole (top shelf adjustable)
adjustable shelf adjustable shelf ● BSS36 features two 32” diameter white spin
● Natural finish wood spin units feature 1” lip ● Natural finish wood spin units feature 1” lip and shelves with pole (top shelf adjustable)
● Wood spin diameter is 28” for BSS33 and 32” are 28” in diameter ● All door styles must be ordered hinged left
for BSS36 ● All door styles must be ordered hinged left or right
● All door styles must be ordered hinged left or right ● Sides are finished
● Sides are finished ● Doors open 170 degrees ● Cabinet requires a minimum of 34” to fit through
● Doors open 170 degrees ● Cabinet requires a minimum of 34” to fit through doorway
● Cabinet requires a minimum of 34” to fit through doorway ● Additional space recommended if appliance is
doorway ● Additional space recommended if appliance is installed on the hinge side of this cabinet for
● Additional space recommended if appliance is installed on the hinge side of this cabinet for proper door operation
installed on the hinge side of this cabinet for proper door operation
proper door operation ● Front frame opening dimension A =12 11⁄16”
BASE CABINETS
Potomac 20-20 catalog.
● Features two 28” diameter white spin shelves with ● Fixed wood spin unit mounted on cabinet floor ● Features two 28” diameter full round white spin
pole (top shelf adjustable) ● Features one wood spin unit attached to 3⁄4” shelves with pole (top shelf adjustable)
● All door styles must be ordered hinged left adjustable shelf ● Sides are finished
or right ● Natural finish wood spin units feature 1” lip and ● Cabinet requires a minimum of 34” to fit through
● Cabinet requires a minimum of 34” to fit through ● Cabinet requires a minimum of 34” to fit through installed on the hinge side of this cabinet for
doorway doorway proper door operation
● Additional space recommended if appliance is ● Additional space recommended if appliance is ● Cabinet features solid top
installed on the hinge side of this cabinet for installed on the hinge side of this cabinet for
proper door operation proper door operation
● Front frame opening dimension A =12 11⁄16” ● Cabinet features solid top
A B
CSF36 35
31
⁄32” 16 15⁄16”
CSF42 42
11
⁄32” 25 15⁄16”
● CAR36 features two 24” diameter white spin ● No shelf ● Corner Sink Front not trimmable
shelves with pole (top shelf adjustable) ● Sides are finished ● Vertical edges of frame are mitered to attach to
● CAR36 WD features two 24” diameter natural ● Cabinet requires a minimum of 34” to fit through adjacent cabinet frames
finish solid hardwood spin shelves with pole doorway ● Toe kick shipped loose
(top shelf adjustable) ● Additional space recommended if appliance is ● Order floors and returns separately (trimming
● All door styles must be ordered hinged left installed on either side of this cabinet for proper may be required) – refer to Panel section for
or right appliance door operation availability
● Sides are unfinished ● Cabinet features solid top which must be field
● Doors open 170 degrees cut for sink installation as per manufacturer’s
● If unit has an exposed side, order end panel separately specifications
● Additional support for countertop in back is ● Maximum sink width is 25 3⁄4” if cut out is 4”
installed on the hinge side of this cabinet for for adequate clearance and required
proper door operation installation materials
● Front frame opening dimension A =14 5⁄8”
BSDC6 BWRC6
BASE CABINETS
Inset toe kick construction requires BTK8 l Features veneered engineered wood with exterior ● Features veneered engineered wood finished to
matching toe kick – must be ordered only finished match cabinet exterior
separately. l Five individual full-depth drawers ● Interior finished to match cabinet exterior
l Flush sides with no face frame or 1⁄4” reveals ● Accommodates five wine bottles
l All wood drawer body with dovetail construction ● 3⁄4” thick sides and shelves
l Wood door styles feature matching wood knobs ● Flush sides with no face frame or 1⁄4” reveals
l Thermo Foil door styles feature white ● Cannot be retrofitted with Base Spice Drawer
SEB SEPB
ID
BSPLY2434 RD l Features veneered engineered wood finished to l Features veneered engineered wood finished to
RTK match cabinet exterior match cabinet exterior
● Interior finished to match cabinet exterior ● Interior finished to match cabinet exterior
A
BMC24 20
3
⁄4”
BMC27 23
3
⁄4”
BMC30 26
3
⁄4” A A B B
Cut Out Min. Max. Min. Max.*
RD RD BOCU27 20 3
⁄4” 24
15
⁄16” 18
1
⁄4” 29”
BMC24 RTK BOCU27 RTK
BMC27 BOCU30 BOCU30 23 3
⁄4” 27
15
⁄16” 18
1
⁄4” 29”
BASE CABINETS
● Microwave opening finished to match cabinet ● Designed for mounting single oven below countertop
exterior ● 3” top rail is field removable and field trimmable
● Designed to accommodate countertop style ● 3 1⁄8” stiles
microwave ● Will accommodate certain cooktops (in conjunction with undercounter oven) or drop-in ranges
● Features two standard depth drawers ● Most ovens require a top rail of varying heights to create a finished look and to allow for the
● Accent Molding recommended – order separately oven door to clear the countertop when opened
● Refer to appliance manufacturer’s ● Refer to appliance manufacturer’s specifications for adequate clearances and required
RD
BEA12L FH RTK BEA24 FH
BEA12R FH
● Must be installed between two base ● Field installation accessory ● Field installation accessory
cabinets behind the face frames in 3” ● Chrome finish ● One 21⁄2” high chrome wire shelf per unit
of floor space ● For use in any 24” deep cabinet or Reduced Depth ● For use with BLB45/48 or BLB48/51
BASE CABINETS
● Cannot be installed next to an appliance or at cabinet to RD-14” ● More than one unit can be installed
● No side panels or toe kick ● 34” long x 16” deep from center
● Filler shipped unattached for field installation ● Attaches to back of face frame
● An overlay filler is recommended for Full ● Not sized to fit Reduced Depth cabinets
Sink Base Door Storage Unit Plastic Bag Door Storage Unit Cutting Board Door Rack Kit
A B A B
SBDSU15 9” 10 1
⁄2” PBDSU15 9” 10 1
⁄2”
SBDSU18 10 1
⁄2” 13
1
⁄2” PBDSU18 10 1
⁄2” 13
1
⁄2”
● Cannot be used with Sliding Shelves ● Removable white plastic tray is NOT dishwasher safe ● Solid wood cutting board is NOT dishwasher safe
● Removable white plastic tray is NOT dishwasher safe ● PBDSU15 mounts to 15” or 16” wide base doors ● Cutting board measures 15 15⁄16” x 10 9⁄16” x 1 3⁄16”
● SBDSU15 mounts to 15” or 16” wide base doors ● PBDSU18 mounts to 18” or 19” wide base doors ● CBDRK18 mounts to 18” or 19” wide base doors
A B
WBL35_ 9 1⁄4” 13”
WBL50_ 9 3
⁄4” 13
1
⁄2”
wire rack and full-access glides wire rack with storage bin and full-access glides plastic (WBL__W)
● Order units individually
● Mounts in B18 (14 3⁄4”) or wider cabinet opening ● Mounts in B15 (11 3⁄4”) or wider cabinet opening
● Lid holds can liner in place
● Unit measures 11 5⁄8” W x 19 1⁄8” H x 22 3⁄4” D ● Unit measures 10 5⁄8” W x 19 1⁄4” H x 22” D
● Not sized to fit Reduced Depth cabinets ● Not sized to fit Reduced Depth cabinets
STB HSK
cabinet exterior:
Two 1⁄16” metal heat shields
One strip of wood QM8 WD molding shield
(not required for Base installation)
BASE CABINETS
• 15” Sink Base Door Storage Unit (SBDSU15)
SBMS36 KIT
• 15” Plastic Bag Door Storage Unit (PBDSU15) A
• Sink Base Multi-Storage Shelf (SBMSS) SSK12 8 1
⁄2”
• One Stainless Tilt-Out Tray Kit (STO TRAY 22) SSK13 10”
● Field installation accessory ● SBMS36 KIT for 36” sink base only and features: SSK15 11 1
⁄2”
● Not sized to fit Reduced Depth cabinets • 18” Sink Base Door Storage Unit (SBDSU18) SSK16 13”
● Tilt-Out Trays and door storage unit trays • 18” Plastic Bag Door Storage Unit (PBDSU18) SSK18 14 1
⁄2”
are NOT dishwasher safe • Sink Base Multi-Storage Shelf (SBMSS) SSK19 16”
• Two Stainless Tilt-Out Tray Kits (STO TRAY 11) SSK21 17 1
⁄2”
SSK24 20 1
⁄2”
SSK30 26 1
⁄2”
SSK33 29 1
⁄2”
SSK36 32 1
⁄2”
Sink Base Multi-Storage Shelf Tilt-Out Tray Kit
RD
SSK12 SSK21
SSK13 SSK24
SSK15 SSK30
SSK16 SSK33
SSK18 SSK36
SSK19
instructions
● Field installation accessory ● Field installation accessory ● SSKs can be used with all single and double door
● TO TRAY 11 or STO TRAY 11: cabinets that have fixed center stile – contact
Order one unit for SB18 Customer Care for drill template
Order two units for SB33 or SB36
● TO TRAY 14 or STO TRAY 14:
above
● Tilt-Out Trays are NOT dishwasher safe
Base Oven
A Cabinet Size Cabinet Size
BPPOK24 19 3
⁄4” 24” 27”
BPPOK30 25 3
⁄4” 30” 33”
BPPOK33 28 3
⁄4” 33” —
BPPOK36 31 3
⁄4” 36” —
A Cabinet Size
ROTDK12 7 3
⁄4” 12”
ROTDK15 10 3
⁄4” 15”
BPPOK24
BPPOK30
BPPOK33
BPPOK36 ROTDK12
ROTDK15
BASE CABINETS
SKU Coding
DDO 18 21
Cabinet Type width depth
(e.g., DDO= in inches in inches
Desk Door Cabinet)
RTK RTK
FDB1821 DWBT1821
● Will accept letter or legal size hanging files ● Frame slides on full-access glides
Single door Desk Base cabinets are hinged ● Includes bag storage tray at rear
left and can be reversed in the field. ● Decorative hardware strongly recommended
CFO CFO
DDO1221 RD DDO2421 RD
DDO1521 RTK RTK
DDO1821
DDO2121
● One large and two standard drawers ● Two-tiered file drawer system ● Full-height door
● Large drawer cannot be used as a file drawer ● Features hanging file tracks with no sides or ● Features two white plastic 35 quart capacity bins
bottom ● Wastebaskets rest in a natural maple plywood frame
● Will accept letter or legal size hanging files ● Frame slides on full-access glides
● One half-depth adjustable shelf ● Left door with batten ● One large and two standard drawers
● May be accessorized with one Sliding Shelf ● One half-depth adjustable shelf ● Large drawer cannot be used as a file drawer
● Recommend mounting Sliding Shelf on cabinet ● May be accessorized with one Sliding Shelf
A B Max. Trim
KDC27/21 27” 17 3
⁄4” 21” (3” each side) A B
KDC33/27 33” 23 3
⁄4” 27” (3” each side) SUCO27 27” 8 7⁄8”
KDC36/33 36” 29 3
⁄4” 33” (1 1⁄2” each side) SUCO30 30” 11 3
⁄8”
DESK CABINETS & BOOKSHELVES
RD
KDC27/21 SUCO24 SUCO27
KDC33/27 SUCO30
KDC36/33
● Designed for Desk or Vanity installation ● SUCO24 installs below 24” wide wall cabinet ● SUCO27 installs below 27” wide wall cabinet
● Field trimmable in depth to 18” ● Features 1⁄2” veneered engineered wood finished ● SUCO30 installs below 30” wide wall cabinet
● Field trimmable in height to 4 3⁄4” to match cabinet exterior ● Features 1⁄ 2” veneered engineered wood finished
● Flush sides with no face frame or 1⁄4” reveals to match cabinet exterior
● Opening is 5” high ● Flush sides with no face frame or 1⁄4” reveals
● Opening is 5” high
ID ID ID
BSPLY2434 RD BSPLY1848 RD BSPLY1860 RD
RTK BSPLY2448 BSPLY2460
BSPLY3048 BSPLY3060
BSPLY3648 BSPLY3660
● Features five adjustable 3⁄4” veneered plywood ● Features six adjustable 3⁄4” veneered plywood ● Features six adjustable 3⁄4” veneered plywood
A
DESK CABINETS & BOOKSHELVES
SC30 30”
SC30
SC36 SC36 36”
SC42 SC42 42”
RD
SSK12 SSK1221
SSK15 SSK1521
SSK18 SSK1821
SSK21 SSK2421
SSK24
instructions
KBT30
● Black finish
Tall Cabinets
TALL CABINETS
Dimensions
Width Depth Height
12” to 36” 12” to 24” 84” to 96”
(Reduced Depth optional
on select cabinets)
SKU Coding
UT 18 24 X 90
Cabinet Type width depth height
(e.g., UT= in inches in inches in inches
Utility Cabinet)
CFO CFO
UT1212 X 84 MFD UT2412 X 84 MFD
UT1512 X 84 MI UT2412 X 90 MI
UT1812 X 84 OFD UT2412 X 96 OFD
RD RD
UT1512 X 90
UT1812 X 90
UT1512 X 96
UT1812 X 96
● Shelving and optional interior accessories may ● Left doors with battens
be ordered separately – refer to Utility Cabinet ● Shelving and optional interior accessories may
Accessories for details be ordered separately – refer to Utility Cabinet
● 4” inset toe kick assembly shipped inside 96” Accessories for details
high cabinet ● 4” inset toe kick assembly shipped inside 96”
high cabinet
TALL CABINETS
96” High 3 4 96” High 3 4
MFD MFD
UT1212 X 84 AS MI UT2412 X 84 AS MI
UT1512 X 84 AS OFD UT2412 X 90 AS OFD
UT1812 X 84 AS RD UT2412 X 96 AS RD
UT1512 X 90 AS
UT1812 X 90 AS
UT1512 X 96 AS
UT1812 X 96 AS
● Full-depth adjustable shelves are 3⁄4” engineered ● Left doors with battens
wood and edge banded on front edge only ● Full-depth adjustable shelves are 3⁄4” engineered
● All shelving packaged separately for field wood and edge banded on front edge only
installation ● All shelving packaged separately for field
high cabinet
● Shelving and optional interior accessories may ● Left doors with battens ● Full-depth adjustable shelves are 3⁄4” engineered
be ordered separately – refer to Utility Cabinet ● Shelving and optional interior accessories may wood and edge banded on front edge only
Accessories for details be ordered separately – refer to Utility Cabinet ● All shelving packaged separately for field
● 4” inset toe kick assembly shipped inside 96” Sliding Shelves in lower section high cabinet
high cabinet ● 4” inset toe kick assembly shipped inside 96”
high cabinet
Number Shelves Number Shelves Number Shelves Number Number Shelves Number
Top Section Lower Section Top Section Sliding Shelves Top Section Sliding Shelves
84” High 1 4 84” High 1 4 84” High 1 4
90” High 2 4 90” High 2 4 90” High 2 4
TALL CABINETS
96” High 3 4 96” High 3 4 96” High 3 4
● Left doors with battens ● Full-depth adjustable shelves are 3⁄4” engineered ● Left doors with battens
● Full-depth adjustable shelves are 3⁄4” engineered wood and edge banded on front edge only ● Full-depth adjustable shelves are 3⁄4” engineered
wood and edge banded on front edge only ● All shelving and Sliding Shelves packaged wood and edge banded on front edge only
● All shelving packaged separately for field ● All shelving and Sliding Shelves packaged
separately for field installation
installation ● 4” inset toe kick assembly shipped inside 96” separately for field installation
● 4” inset toe kick assembly shipped inside 96” ● 4” inset toe kick assembly shipped inside 96”
high cabinet
high cabinet high cabinet
Number Shelves
Top Section
TALL CABINETS
84” High 1
90” High 2
96” High 3
MFD
UT3624 X 84 PCDS MI
UT3624 X 90 PCDS OFD
UT3624 X 96 PCDS
high cabinet
● Minimum filler width of 4 1⁄ 2” recommended
TALL CABINETS
OVS3384 26 3
⁄4” 31” 22 1
⁄8” 37
3
⁄8” OVS3390 AS 26 3⁄4” 31” 21 3
⁄4” 37”
CFO CFO
OVS2784 RD OVS2790 AS RD
OVS3084 OVS3090 AS
OVS3384 OVS3390 AS
● Order Oven Support Shelf (OSS__) edge banded on front edge only (for top section)
separately ● Shelf packaged separately for field installation
Cut Out A A B B
Dimensions Actual Max. Actual Max.
OVS2796 AS 20 3⁄4” 25” 22 1
⁄8” 37 3
⁄8”
OVS3096 AS 23 3⁄4” 28” 22 1
⁄8” 37 3
⁄8”
TALL CABINETS
CFO
OVS2796 AS RD
OVS3096 AS
OVS3396 AS
separately
● Refer to appliance manufacturer’s
TALL CABINETS
OVS3384 BPPO 26 3⁄4” 31” 22 1
⁄8” 37 3
⁄8” OVS3390 BPPO 26 3⁄4” 31” 21 3
⁄4” 37” OVS3396 BPPO 26 3⁄4” 31” 22 1
⁄8” 37 3
⁄8”
● Left doors with battens ● Left doors with battens ● Left doors with battens
● 3 1⁄8” stiles ● 3 1⁄8” stiles ● 3 1⁄8” stiles
● Base Pot & Pan Organizer packaged separately for ● Features one full-depth 3⁄4” engineered wood shelf ● Features two full-depth 3⁄4” engineered wood
field installation edge banded on front edge only (for top section) shelves edge banded on front edge only
● Organizer with natural finish solid wood, wood ● Shelf and Base Pot & Pan Organizer packaged (for top section)
veneer and dovetail (front only) construction with separately for field installation ● Shelving and Base Pot & Pan Organizer packaged
MDF bottom and Side-Mounted Drawer Glides ● Organizer with natural finish solid wood, wood separately for field installation
● Organizer top shelf measures 6 3⁄16” deep veneer and dovetail (front only) construction with ● Organizer with natural finish solid wood, wood
● Organizer middle shelf measures 9 3⁄4” deep MDF bottom and Side-Mounted Drawer Glides veneer and dovetail (front only) construction with
● Order Oven Support Shelf (OSS__) ● Organizer top shelf measures 6 3⁄16” deep MDF bottom and Side-Mounted Drawer Glides
separately ● Organizer middle shelf measures 9 3⁄4” deep ● Organizer top shelf measures 6 3⁄16” deep
● Refer to appliance manufacturer’s ● Order Oven Support Shelf (OSS__) ● Organizer middle shelf measures 9 3⁄4” deep
specifications for adequate clearances separately ● Order Oven Support Shelf (OSS__)
OVD3384 26 3
⁄4” 31” 39” 54 1⁄4” OVD3390 AS 26 3⁄4” 31” 38 5⁄8” 53 7⁄8” OVD3396 AS 26 3⁄4” 31” 39” 54 1⁄4”
*Maximum height by removing drawer unit and frame *Maximum height by removing drawer unit and frame *Maximum height by removing drawer unit and frame
horizontal is 60 1⁄4” horizontal is 60 1⁄4” horizontal is 60 1⁄4”
● Left door with batten ● Left door with batten ● Left door with batten
● 3 1⁄8” stiles ● 3 1⁄8” stiles ● 3 1⁄8” stiles
● Order Oven Support Shelf (OSS__) ● Features one full-depth 3⁄4” engineered wood shelf ● Features two full-depth 3⁄4” engineered wood
separately edge banded on front edge only (for top section) shelves edge banded on front edge only
● Refer to appliance manufacturer’s ● Shelf packaged separately for field installation (for top section)
specifications for adequate clearances ● Order Oven Support Shelf (OSS__) ● Shelving packaged separately for field installation
and required installation materials separately ● 4” inset toe kick assembly shipped inside cabinet
TALL CABINETS
PCSK36 PDSK18
● Natural finish unit features two fixed and ten ● Can be used with PCSK36 and/or PSK36
adjustable shelves with chrome rail ● Natural finish unit features one fixed and five
● Not sized to fit Reduced Depth cabinets 12” wide x 45” high x 4” deep
● Minimum filler width of 4 1⁄2” recommended ● Not sized to fit Reduced Depth cabinets
for installation of a cabinet with this ● Minimum filler width of 4 1⁄2” recommended
accessory next to deeper adjacent objects for installation of a cabinet with this
including cabinets, walls, appliances and accessory next to deeper adjacent objects
countertops including cabinets, walls, appliances and
countertops
■ MI
Adjustable Shelf RD
12” Deep 24” Deep
TALL CABINETS
■ S1212 ■ S1224
■ S1512 ■ S1524
■ S1812 ■ S1824
■ S2412 ■ S2424
■ S3612 S2724
■ S3024
S3324
■ S3624
and installation instructions ● CLIP LOCK shelf rests included ● Overall dimensions:
● For use inside UT3624 X __ 2 7⁄8” wide x 9 15⁄16” high x 11 3⁄4” deep
● Field trimmable for use inside UT1824 ● Order Cabinet Tray Dividers individually
● Can be used with PCSK36 and/or PDSK18 ● For use in any 24” deep cabinet or Reduced Depth
cabinet to RD-14”
TALL CABINETS
A
SSK12 8 1
⁄2”
SSK15 11 1
⁄2”
SSK18 14 1
⁄2”
SSK24 20 1
⁄2”
SSK30 26 1
⁄2”
SSK36 32 1
⁄2”
RD
Sliding Shelf Kit OSS27
SSK12 OSS30
SSK15 OSS33
SSK18
SSK24
SSK30
SSK36
4 Pack Sliding Shelf Kit ● Features 3⁄4” unfinished engineered wood shelf and
USS12-4K six mounting clips with screws
USS15-4K ● Will support up to 300 lbs when installed per
instructions
HSK
Vanity Cabinets
Dimensions
Width Height Depth
VANITY CABINETS
12” to 60” 311⁄8” to 84” 18” to 20 3⁄4”
(Reduced Depth optional
on select cabinets)
SKU Coding
VAN 42
Cabinet Type width in inches
(e.g., VAN=Vanity Sink Base)
CFO CFO
VB12 RD VB24 RD
VB15 RTK RTK
VB18
VB21
● No shelf ● No shelf
● Left door with batten
Standard Height Vanity cabinets are
31 1⁄8” high, 12” to 60” wide and
18“ or 20 3⁄4” deep.
Cathedral doors are not available on
Standard Height Vanity Base cabinets.
Single door Standard Height Vanity
cabinets are hinged left and can be
reversed in the field.
Inset toe kick construction requires BTK8 Vanity Base Vanity Drawer Base
matching toe kick—must be ordered 2 Doors, 1 Drawer • 311⁄8” High 3 Drawers • 311⁄8” High
separately.
VANITY CABINETS
● No shelf ● No shelf
● No shelf
● Subtract 1 1⁄2” from depth and width for available ● Left door with batten
● Left door with batten
sink bowl opening ● Subtract 1 1⁄ 2” from depth and width for available
● Subtract 1 1⁄ 2” from depth and width for available
sink bowl opening
sink bowl opening
Vanity Sink Base Vanity Sink Base – 18” Deep Vanity Sink Base
2 Doors, 1 Panel • 311⁄8” High 2 Doors, 1 Panel • 311⁄8” High 2 Doors, 2 Panels • 311⁄8” High
VANITY CABINETS
CFO CFO CFO
VSB27 RD VSB3018 RD VSB42 RD
VSB30 RTK VSB3618 RTK RTK
VSB33
VSB36
A
A
VSB54 27”
VAN36 12”
VSB60 30”
VAN42 18”
CFO CFO CFO
VSB48 RD VSB54 RD VAN36 RD
RTK VSB60 RTK VAN42 RTK
Vanity Sink Base Vanity Sink Base Vanity Combo Sink Base
3 Doors, 2 Drawers • 311⁄8” High 4 Doors, 2 Drawers • 311⁄8” High 1 Door, 2 Drawers • 311⁄8” High
VANITY CABINETS
A B
VSDB24 12” 12”
A
VSDB27 15” 12”
VAN54 12”
VSDB30 18” 12”
VAN60 15”
VSDB33 21” 12”
VSDB36 21” 15”
CFO CFO CFO
VAN48 RD VAN54 RD VSDB24 VSDB33 RD
RTK VAN60 RTK VSDB27 VSDB36 RTK
VSDB30
● No shelf
● No shelf ● No shelf ● Open area for plumbing access
● Top drawer on each side of sink bowl opening ● Top drawer on each side of sink bowl opening
● Allow for plumbing placement to clear drawers
● Subtract 1 1⁄ 2” from depth for available sink bowl ● Subtract 1 1⁄ 2” from depth for available sink bowl
● Drawers available on right or left side (please specify)
opening opening ● Cabinet shown is right indicating drawers on the
● Hinged as shown – center door may be reversed ● Maximum sink opening 33”
right side of the cabinet
in field ● Subtract 1 1⁄ 2” from depth and overall cabinet
● Maximum sink opening 21”
width for available sink bowl opening
A B
VSDB2418 12” 12”
A
VSDB2718 15” 12”
VSDB48D 12”
VSDB3018 18” 12”
VSDB54D 15”
VSDB3318 21” 12”
VSDB3618 21” 15”
CFO CFO CFO
VSDB2418 VSDB3318 RD VSDB42 RD VSDB48D RD
VSDB2718 VSDB3618 RTK RTK VSDB54D RTK
VSDB3018
● No shelf ● No shelf
● No shelf
● Open area for plumbing access ● Open area for plumbing access
● Allow for plumbing placement to clear drawers ● Allow for plumbing placement to clear drawers
● Open area for plumbing access
● Left door with batten
● Drawers available on right or left side (please specify) ● Drawers available on right or left side (please specify)
● Subtract 1 1⁄ 2” from depth and 24” dimension for
● Cabinet shown is right indicating drawers on the ● Cabinet shown is right indicating drawers on the
available sink bowl opening
right side of the cabinet right side of the cabinet
● Subtract 1 1⁄ 2” from depth and overall cabinet ● Subtract 1 1⁄ 2” from depth and 30” dimension
width for available sink bowl opening for available sink bowl opening
● Requires off center sink bowl opening
VANITY CABINETS
CFO CFO
VSDB60D RD VSDB60C RD
RTK RTK
● No shelf ● No shelf
● Open area for plumbing access ● Left doors with battens
● Subtract 1 1⁄ 2” from depth and 30” dimension for ● Open area for plumbing access
available sink bowl opening ● Subtract 1 1⁄ 2” from depth and each 24” dimension
● Vanity Sink Front not trimmable ● Vanity Sink Front not trimmable ● Vanity Sink Front not trimmable
● Order floors and returns separately ● Left door with batten ● Order floors and returns separately
(trimming may be required) – refer to Panel ● Order floors and returns separately (trimming may be required) – refer to Panel
Section for availability (trimming may be required) – refer to Panel Section for availability
Section for availability
VSF42 VSF48
● Vanity Sink Front not trimmable ● Vanity Sink Front not trimmable
● Order floors and returns separately ● Hinged as shown – center door may be reversed
(trimming may be required) – refer to Panel in field
Section for availability ● Order floors and returns separately
CFO CFO
VB1234H RD VB2434H RD
VB1534H RTK VB2734H RTK
VB1834H VB3034H
VB2134H VB3334H
VB3634H
● No shelf ● No shelf
● VB2434H features two doors with a batten
Base Height Vanity cabinets are
34 1⁄2” high, 12” to 60” wide and
18“ or 20 3⁄4” deep.
Cathedral doors are not available on
Base Height Vanity Base cabinets.
Single door Base Height Vanity cabinets
are hinged left and can be reversed in
the field.
Inset toe kick construction requires BTK8 Full-Height Vanity Base Full-Height Vanity Base
matching toe kick—must be ordered 1 Door • 341⁄2” High 2 Doors with Batten • 341⁄2” High
separately.
VANITY CABINETS
Check sink manufacturer’s
specifications for adequate
CFO CFO
clearance and required VB1234H FH RD VB2434H 1B FH RD
VB1534H FH RTK VB3034H 1B FH RTK
installation materials. VB1834H FH VB3634H 1B FH
VB2134H FH
When placing a Base Height
Vanity Sink Base cabinet in a
design, select a cabinet at least ● Full-height door ● Full-height doors
3” wider than the sink to allow ● No shelf ● Left door with batten
● No shelf
for installation clips. Review
manufacturer’s specifications
for dimensions and adequate
clearance requirements.
Vanity Sink Base – 18” Deep Vanity Sink Base – 18” Deep Vanity Sink Base
2 Doors with Batten, 1 Panel • 341⁄2” High 2 Doors, 1 Panel • 341⁄2” High 2 Doors, 1 Panel • 341⁄2” High
VANITY CABINETS
A
VSB5434H 27”
VSB6034H 30”
CFO CFO CFO
VSB4234H RD VSB4834H RD VSB5434H RD
RTK RTK VSB6034H RTK
VANITY CABINETS
A A
VAN3634H 12” VAN5434H 12”
VAN4234H 18” VAN6034H 15”
CFO CFO CFO
VAN3634H RD VAN4834H RD VAN5434H RD
VAN4234H RTK RTK VAN6034H RTK
● Maximum sink opening for VAN3634H is 18” ● Hinged as shown – center door may be reversed ● Subtract 1 1⁄ 2” from depth for available sink bowl
A B A B
VSDB2434H 12” 12” VSDB241834H 12” 12”
VSDB2734H 15” 12” VSDB271834H 15” 12”
VSDB3034H 18” 12” VSDB301834H 18” 12”
VSDB3334H 21” 12” VSDB331834H 21” 12”
VSDB3634H 21” 15” VSDB361834H 21” 15”
CFO CFO CFO
VSDB2434H RD VSDB241834H RD VSDB4234H RD
VSDB2734H RTK VSDB271834H RTK RTK
VSDB3034H VSDB301834H
VSDB3334H VSDB331834H
VSDB3634H VSDB361834H
● No shelf
● No shelf ● No shelf ● Open area for plumbing access
● Open area for plumbing access ● Open area for plumbing access ● Allow for plumbing placement to clear drawers
● Allow for plumbing placement to clear drawers ● Allow for plumbing placement to clear drawers ● Drawers available on right or left side (please specify)
● Drawers available on right or left side (please specify) ● Drawers available on right or left side (please specify) ● Cabinet shown is right indicating drawers on the
● Cabinet shown is right indicating drawers on the ● Cabinet shown is right indicating drawers on the right side of the cabinet
● Subtract 1 1⁄ 2” from depth and 30” dimension for
right side of the cabinet right side of the cabinet
● Subtract 1 1⁄ 2” from depth and overall cabinet ● Subtract 1 1⁄ 2” from depth and overall cabinet available sink bowl opening
● Requires off center sink bowl opening
width for available sink bowl opening width for available sink bowl opening
Vanity Combo Sink Base Vanity Combo Sink Base Vanity Combo Sink Base
2 Doors with Batten, 6 Drawers 2 Doors, 6 Drawers • 341⁄2” High 4 Doors with Batten, 3 Drawers
341⁄2” High 341⁄2” High
VANITY CABINETS
A
VSDB4834HD 12”
VSDB5434HD 15”
● Left door with batten ● Subtract 1 1⁄ 2” from depth and dimension 30” for ● Left doors with battens
● Subtract 1 1⁄ 2” from depth and 24” dimension for available sink bowl opening ● Subtract 1 1⁄ 2” from depth and each 24” dimension
VC2436 MC1530
MCM1530
● Bottom opening: 22 1⁄ 2” x 10 7⁄8” ● For surface mount installation of wood door styles,
● Features a fixed shelf trim and apply WEP30 to match finish on exterior
● Sides and bottom shelf feature 3⁄4” engineered sides to cabinet frame – order separately
wood veneered on both sides
VANITY CABINETS
Cut Out Cut Out
Width Height A B Max. Trim
Overall Overall Recess Recess
Width Height Mount Mount KDC27/21 27” 17 3
⁄4” 21” (3” each side)
TV3030 30” 30 1
⁄8” 28 1
⁄2” 28
1
⁄2” KDC33/27 33” 23 3
⁄4” 27” (3” each side)
TV3630 36” 30 1
⁄8” 34 1
⁄2” 28
1
⁄2” KDC36/33 36” 29 3
⁄4” 33” (1 1⁄2” each side)
RTK RD
TV3030 VWBT1834H KDC27/21
TV3630 KDC33/27
KDC36/33
● All three mirrored doors swing open for easy ● Features one white plastic 35 quart capacity bin ● Designed for Desk or Vanity application
access to the six adjustable shelves ● Wastebasket rests in a natural maple plywood frame ● Field trimmable in height to 4 3⁄4”
● Surface or recess mount ● Frame slides on full-access glides ● Field trimmable in depth to 18” or Reduced Depth
● For surface mount installation of wood door styles, ● Includes bag storage tray at rear Option is available
● Decorative hardware strongly recommended
trim and apply WEP30 to match finish on exterior
● Storage tray NOT dishwasher safe
sides to cabinet frame – order separately
● Chrome hardware ● Wastebasket lid may be ordered separately
CFO CFO
VLC122184 MFD VLC242184 MFD
VLC152184 MI MI
VLC182184 OFD OFD
RD RD
● Shelving and optional interior accessories may be ● Left doors with battens
ordered separately – refer to Vanity Linen cabinet ● Shelving and optional interior accessories may be
Accessories for details ordered separately – refer to Vanity Linen cabinet
● Cabinet backs are pre-drilled to accept up to Accessories for details
four Sliding Shelves in lower section ● Cabinet backs are pre-drilled to accept up to
VANITY CABINETS
MFD MFD MFD
VLC122184 AS MI VLC242184 AS MI VLC122184 4SSK MI
VLC152184 AS OFD OFD VLC152184 4SSK OFD
VLC182184 AS RD RD VLC182184 4SSK RD
● Features one full-depth shelf in top section and ● Left doors with battens ● Features one full-depth adjustable shelf in top
four full-depth shelves in lower section ● Features one full-depth shelf in top section and section and four engineered wood Sliding Shelves
● Full-depth adjustable shelves are 3⁄4” engineered four full-depth shelves in lower section in lower section
wood and edge banded on front edge only ● Full-depth adjustable shelves are 3⁄4” engineered ● Full-depth adjustable shelf is 3⁄4” engineered wood
● Adjustable shelves packaged separately for wood and edge banded on front edge only and edge banded on front edge only
field installation ● Adjustable shelves packaged separately for ● Adjustable shelf and Sliding Shelves packaged
A
SSK1221 8 1⁄2”
SSK1521 11 1
⁄2”
SSK1821 14 1
⁄2”
SSK2421 20 ⁄2”
VANITY CABINETS
MFD MI RD
VLC242184 4SSK MI Adjustable Shelf RD Sliding Shelf Kit
OFD S1221 SSK1221
RD S1521 SSK1521
S1821 SSK1821
S2421 SSK2421
4 Pack Shelf Kit 4 Pack Sliding Shelf Kit
SK1221 USS1221-4K
SK1521 USS1521-4K
SK1821 USS1821-4K
SK2421 USS2421-4K
● Left doors with battens ● Field installation accessory ● Field installation accessory
● Features one full-depth adjustable shelf in top ⁄ ” engineered wood
● 34 ● Engineered wood drawer with solid hardwood
section and four engineered wood Sliding Shelves ● Edge banded on front edge only front, MDF bottom and Side-Mounted Drawer
in lower section ● CLIP LOCK shelf rests included Glides
● Full-depth adjustable shelf is 3⁄4” engineered wood ● Includes Sliding Shelf, all glide hardware and
CFO CFO
B24 1B UD RD B27 UD RD
RTK B30 UD RTK
B33 UD
B36 UD
B39 UD
Universal Design Base Cabinets are 32 1⁄2” B42 UD
high by 24” deep. The toe kick is 8” high
and 6 1⁄2” deep to accommodate most ● Left door with batten ● 34 ⁄ ” half-depth adjustable shelf
wheelchair footrests. ⁄ ” half-depth adjustable shelf
● 34 ● Center support for shelf provided
● Center support for shelf provided
Cathedral doors are not available on
Universal Design Base Cabinets.
Single-door Universal Design Base
Cabinets are hinged left and can be
reversed in the field.
Inset toe kick construction requires BTK8
Universal Design Universal Design
UNIVERSAL DESIGN CABINETS
CFO RD
B45 UD RD B12 SS1 UD RTK
RTK B15 SS1 UD
B18 SS1 UD
B21 SS1 UD
RD RD RD
B24 1B SS1 UD RTK B12 SS2 UD RTK B24 1B SS2 UD RTK
B15 SS2 UD
B18 SS2 UD
B21 SS2 UD
● Left door with batten ● Sliding Shelves are not adjustable ● Left door with batten
● Sliding Shelf in center position not adjustable ● Engineered wood Sliding Shelves included ● Sliding Shelves are not adjustable
● Engineered wood Sliding Shelf included ● Recessed Toe Kick Both (RTKB) not available for ● Engineered wood Sliding Shelves included
CFO
SB30 UD RD BPS30 UD VPS30 UD
SB33 UD RTK BPS36 UD VPS36 UD
SB36 UD
for adequate clearance and required for adequate clearance and required
installation materials installation materials
CFO
DB12 UD RD CBS36 UD
DB15 UD RTK
DB18 UD
DB21 UD
DB24 UD
● One large and two standard drawers ● Features one 28” diameter full round white spin shelf mounted on floor
● Recessed Toe Kick Both (RTKB) not available for ● Sides are finished
the DB12 UD and DB15 UD ● Cabinet requires a minimum of 34” to fit through doorway
Base Multi-Use
1 Drawer
A
RD RD SSK13 10”
BMU30 UD RTK SSK13 SSK21
SSK15 SSK24 SSK15 11
1
⁄2”
SSK16 SSK16 13”
SSK18 SSK18 14
1
⁄2”
SSK19 SSK19 16”
SSK21 17
1
⁄2”
SSK24 20
1
⁄2”
● Designed to accommodate countertop style ● Field installation accessory
microwaves or small appliances below countertop ● Engineered wood drawer with solid hardwood
● Opening dimensions: 26 3⁄4” wide X 15 1⁄4” high front, MDF bottom and Side-Mounted Drawer
● Interior finished to match cabinet exterior Glides
● Accent Molding recommended (order separately) ● Includes Sliding Shelf, all glide hardware and
required installation materials cabinets that have fixed center stile – contact
Customer Care for drill template
DEP DWR3
● Features 3⁄4” veneered engineered wood finished ● Reversible for left or right installation
to match cabinet exterior on both sides ● Solid wood front
● Recommend QM8 WD be ordered for installation ● Features 1⁄ 2” engineered wood with outside
to ensure proper attachment to wall finished to match cabinet exterior and inside with
● Field trimmable natural woodgrain TuffTech finish
● Attaching blocks included
● Features 1⁄2” engineered wood with outside ● Features 1⁄2” engineered wood with natural
finished to match cabinet exterior and inside with woodgrain TuffTech finish on one side
natural woodgrain TuffTech finish ● 1⁄2” oversize in width
A B
FP4834 48” 34
1
⁄2”
FP4896 48” 96”
FP9634 96” 34
1
⁄2”
FP9648 96" 48"
FP4834
FP4896
FP9634
FP9648
TEP96 23
1
⁄4” 96” TEP96 GROOVED 23 1⁄4” 96”
● Wood door styles feature 3⁄16” veneered plywood ● Grooved every 1 1⁄2” on one side
finished on one side to match cabinet exterior ● Features 3⁄16” veneered plywood finished to match A B
● Thermo Foil door styles feature 1⁄8” roll-coated cabinet exterior FP4834 GROOVED 48” 34 1⁄2”
industrial substrate finished on one side to match ● Field trimmable FP4896 GROOVED 48” 96”
cabinet exterior FP9634 GROOVED 96” 34 1⁄2”
● Field trimmable
FP4834 GROOVED
FP4896 GROOVED
FP9634 GROOVED
A A
WTEP84 84” DWTEP84 84”
WTEP96 96” DWTEP96 96”
● Wood door styles feature 3⁄4” veneered engineered ● Wood door styles feature 3⁄4” veneered engineered ● Wood door styles feature 3⁄4” veneered engineered
wood finished to match cabinet exterior on wood finished to match cabinet exterior on wood finished to match cabinet exterior on
both sides both sides both sides
● Thermo Foil door styles feature 3⁄4” engineered ● Thermo Foil door styles feature 3⁄4” engineered ● Thermo Foil door styles feature 3⁄4” engineered
wood with melamine finish on both sides wood with melamine finish on both sides wood with melamine finish on both sides
● Edge banded on both long edges ● Edge banded on both long edges ● Edge banded on both long edges
A
RR84 84”
RR96 96”
MI
RR84 BLC1515 DORF30
RR96
● Reversible for left or right installation ● Features 1⁄2” engineered wood with natural ● Field trimmable in height and width
● Solid wood front woodgrain TuffTech finish on both sides ● Features 3⁄4” engineered wood finished on one side
● Features 1⁄ 2” engineered wood with outside ● Field trimmable to match cabinet exterior
finished to match cabinet exterior and inside with ● Toe kick is attached and can be removed for
FS4812 BTK8
FS6012 BTK8 UD
FS7212
exposed ends
● BEP34 panel is recommended for installation ● WEP42 panel is recommended for installation ● BEP34 panel is recommended for installation
● Attaches to side of Base cabinet ● Attaches to side of BEA12FH or BSPLY2434 ● Attaches to side of 21” or 24” deep Desk cabinet
● Matches style and color of cabinet doors ● Matches style and color of cabinet doors ● Matches style and color of cabinet doors
● Refer to the Parts Directory section of this guide ● Refer to the Parts Directory section of this guide ● Refer to the Parts Directory section of this guide
DMDV DMDW18
DMDW24
DMDW30
● BEP34 panel is recommended for installation DMDW36
● Attaches to side of 20 3⁄4” deep x 31 1⁄8” high DMDW42
Vanity cabinet
● For 18” deep x 31 1⁄8” high Vanity cabinetry
● WEP30/WEP42 panel is recommended for
order DR1827 ND door
installation
● For Base Height Vanity order DR2130 ND door
● Attaches to side of Wall cabinet
for 20 3⁄4” deep or DR1830 ND for 18” deep ● Matches style and color of cabinet doors
cabinetry ● Panel thickness is 3⁄4”
● Matches style and color of cabinet doors
● Refer to the Parts Directory section of this guide
● Panel thickness is 3⁄4”
for dimensions
● Refer to the Parts Directory section of this guide
for dimensions
for dimensions
A B A
UF3 3” 30
1
⁄2” UF E3 30 1⁄2”
UF6 6” 30
1
⁄2” UF E342 42 1⁄8”
UF342 3” 42
1
⁄8”
UF642 6” 42
1
⁄8”
UF380 3” 80”
UF680 6” 80”
UF392 3” 92”
UF692 6” 92”
UF3 UF6 UF E3
UF342 UF642 UF E342
UF380 UF680
UF392 UF692
⁄ ” solid wood
● 34 ● For wall or base application
● Finished on front and all four edges ⁄ ” solid wood
● 34
● Field trimmable
A
BOF3 29 7
⁄8” A
BOF3 WOF312
DOF3 WOF315 DOF3 23 7
⁄8” WOF630 291⁄2”
WOF318 TOF384 79 3
⁄8” WOF636 351⁄2”
TOF384 WOF321 TOF390 85 3
⁄8” WOF642 411⁄2”
TOF390 WOF324 TOF396 91 3
⁄8”
TOF396 WOF327 VOF3 26 1
⁄2” WOF630
WOF330 WOF312 119⁄16” WOF636
VOF3 WOF336 WOF315 149⁄16” WOF642
WOF342 WOF318 179⁄16”
WOF321 20”
● For Full Overlay door styles only ● For Full Overlay Thermo Foil door styles only
WOF324 23 7
⁄8”
● Outside profile matches door ● Outside profile matches door
● All edges are finished
WOF327 26 1
⁄2” ● All edges are finished
BCF27
⁄ ” solid wood
● 34
A A A
FBF3 30 1
⁄ 2” FBF6 30 1
⁄2” FBF E3 30 1⁄2”
FBF342 42
1
⁄8” FBF642 42
1
⁄8” FBF E342 42 1⁄8”
FBF384 84” FBF684 84”
FBF396 96” FBF696 96”
● Filler is fluted on one side and beaded on reverse ● Filler is fluted on one side and beaded on reverse ● For wall or base application
● Finished on all sides ● Finished on all sides ● Filler is fluted on one side and beaded on reverse
● Field trimmable ● Field trimmable ● Finished on all sides
● Apply 3” wide decorative blocks for accent ● Apply 6” wide decorative blocks for accent ● 3⁄4” solid wood
● Designer note: Ensure correct side is exposed ● Designer note: Ensure correct side is exposed ● Apply 3” wide decorative blocks for accent
when installed when installed ● Designer note: Ensure correct side is exposed
when installed
Beaded
Beaded
(BBC)
(WBC)
Fluted Plain
(TFC) (TPC)
● 3” wide x 3⁄4” thick solid wood front ● 3” wide x 3⁄4” thick solid wood front ● 3” wide x 3⁄4” thick solid wood front
● Finished veneered sides are flush with face ● Finished veneered sides are flush with face ● Finished veneered sides are flush with face
● Reversible for left or right installation ● Reversible for left or right installation ● Reversible for left or right installation
● Top and bottom edges of returns are edge banded ● Top and bottom edges of returns are edge banded ● Top and bottom edges of returns are edge banded
● Field trimmable to any depth ● Field trimmable to any depth ● Field trimmable to any depth
● Field trimmable in height as noted below: ● Field trimmable in height as noted below: ● Field trimmable in height as noted below:
• 31530 field trimmable to 27 1⁄8”, 24 1⁄2”, • 32734 field trimmable to 31 1⁄8” or 28 1⁄2” • 32796 field trimmable to 90”
20 5⁄8”,18 1⁄8”, 15 1⁄8” or 12 1⁄8” • 32784 is not field trimmable in height
• 31542 field trimmable to 36 1⁄8”
• 31560 field trimmable to 48” or 54”
Fluted Fluted
● Apply to FLUTED side of 3” reversible filler, ● Apply to FLUTED side of 3” reversible filler,
reversible filler extension or fluted column filler reversible filler extension or fluted column filler
● Solid wood ● Solid wood
Beaded Beaded
● Apply to BEADED side of 3” reversible filler, ● Apply to BEADED side of 3” reversible filler,
reversible filler extension or beaded column filler reversible filler extension or beaded column filler
● Solid wood ● Solid wood
● Apply to BEADED side of 3” reversible filler, ● Apply to BEADED side of 3” reversible filler, ● Apply to BEADED side of 6” reversible filler
reversible filler extension or beaded column filler reversible filler extension or beaded column filler ● Solid wood
● Solid wood ● Solid wood
available in 20-20. See pages 156-163 ● Pre-packaged molding kit includes: ● Pre-packaged molding kit includes:
MS Traditional 300
MS TRADITIONAL 300
● Molding Stacks shipped unassembled ● Molding Stacks shipped unassembled ● Molding Stacks shipped unassembled
● Molding Stacks to be cut, assembled and field ● Molding Stacks to be cut, assembled and field ● Molding Stacks to be cut, assembled and field
installed at job site installed at job site installed at job site
● Only one finish can be specified per Molding Stack ● Only one finish can be specified per Molding Stack ● Only one finish can be specified per Molding Stack
● Pre-packaged molding kit includes: ● Pre-packaged molding kit includes: ● Pre-packaged molding kit includes:
CCM8 WD
CCM8 WD
● Molding Stacks shipped unassembled ● Molding Stacks shipped unassembled ● Molding Stacks shipped unassembled
● Molding Stacks to be cut, assembled and field ● Molding Stacks to be cut, assembled and field ● Molding Stacks to be cut, assembled and field
installed at job site installed at job site installed at job site
● Only one finish can be specified per Molding Stack ● Only one finish can be specified per Molding Stack ● Only one finish can be specified per Molding Stack
● Pre-packaged molding kit includes: ● Pre-packaged molding kit includes: ● Pre-packaged molding kit includes:
● Finished stack molding diagram included ● Finished stack molding diagram included
DSCVM8 DLCVM8
● Hardwood door styles feature solid wood finished ● All door styles feature solid wood finished to ● All door styles feature solid wood finished to
to match cabinet exterior match cabinet exterior match cabinet exterior
● Thermo Foil door styles are thermo foil ● 8 feet long ● 8 feet long
wrapped MDF
● 8 feet long
● Hardwood door styles feature solid wood finished ● Hardwood door styles feature solid wood finished ● All door styles feature solid wood finished to
to match cabinet exterior to match cabinet exterior match cabinet exterior
● Thermo Foil door styles are thermo foil ● Thermo Foil door styles are thermo foil ● 8 feet long
● Hardwood door styles feature solid wood finished ● Hardwood door styles feature solid wood finished ● All door styles feature solid wood finished to
to match cabinet exterior to match cabinet exterior match cabinet exterior
● Thermo Foil door styles are thermo foil ● Thermo Foil door styles are thermo foil ● 8 feet long
as accent accent
● 8 feet long ● 8 feet long
● Hardwood door styles are veneer wrapped MDF ● Hardwood door styles feature solid wood finished ● All door styles feature solid wood finished to
finished to match cabinet exterior (LR8 WD) to match cabinet exterior match cabinet exterior
● Thermo Foil door styles are thermo foil ● Thermo Foil door styles are thermo foil ● May use CBE8, DM8 WD, RM8 WD or TBE8
● All door styles feature solid wood finished to ● All door styles feature solid wood finished to ● All door styles feature solid wood finished to
match cabinet exterior match cabinet exterior match cabinet interior
● 6 feet long ● 8 feet long ● Can be used as light rail molding
● 8 feet long
● All door styles feature solid wood finished to ● All door styles feature solid wood finished to ● All door styles feature solid wood finished to
match cabinet exterior match cabinet exterior match cabinet exterior
● May use EDM8 as accent ● 8 feet long ● May be used as accent on CCM8 WD,
● All door styles feature solid wood finished to ● All door styles feature solid wood finished to ● All door styles feature solid wood finished to
match cabinet exterior match cabinet exterior match cabinet exterior
● 8 feet long ● May be used as accent on CCM8 WD, ● May be used as accent on CCM8 WD,
● All door styles feature solid wood finished to ● All door styles feature solid wood finished to ● All door styles feature solid wood finished to
match cabinet exterior match cabinet exterior match cabinet exterior
● 8 feet long ● May be used as accent on LBM8 ● 8 feet long
● 8 feet long
PANELS, FILLERS & DECORATIVE ITEMS
Triple Bead Edge Molding Finished Solid Stock Small Single Bead Molding
A
FSS396 3”
TBE8 SSBM8
FSS696 6”
FSS396
FSS696
● All door styles feature solid wood finished to ● All door styles feature solid wood finished to ● All door styles feature solid wood finished to
match cabinet exterior match cabinet interior match cabinet exterior
● May be used as accent on CCM8 WD, ● Both sides and all edges are finished ● 8 feet long
TCCM8 WD and ILR8 ● May also be used in vertical applications (as a filler)
● All door styles feature solid wood finished to ● All door styles feature solid wood finished to ● All door styles feature solid wood finished to
match cabinet exterior match cabinet exterior match cabinet exterior
● 8 feet long ● 8 feet long ● 8 feet long
● All door styles feature solid wood finished to ● All door styles feature solid wood finished to ● All door styles feature solid wood finished to
match cabinet exterior match cabinet exterior match cabinet exterior
● 8 feet long ● 8 feet long ● 8 feet long
● All door styles feature solid wood finished to ● All door styles feature solid wood finished to ● All door styles feature solid wood finished to
match cabinet exterior match cabinet exterior match cabinet exterior
● May be used as accent on Wall China, Wine ● May be used as accent on Wall China, Wine ● May be used as accent on Wall China, Wine
Storage and Base Microwave cabinets Storage and Base Microwave cabinets Storage and Base Microwave cabinets
● 8 feet long ● 8 feet long ● 8 feet long
PANELS, FILLERS & DECORATIVE ITEMS
● All door styles feature solid wood finished to ● Hardwood door styles feature solid wood finished ● All door styles feature solid wood finished to
match cabinet exterior to match cabinet exterior match cabinet exterior
● 8 feet long ● Thermo Foil door styles are thermo foil ● 8 feet long
wrapped MDF
● 8 feet long
BM8 WD WBM8
● All door styles feature solid wood finished to ● All door styles feature solid wood finished to
match cabinet exterior match cabinet exterior
● 8 feet long ● 8 feet long
CAM8
QR8 SM8 WD
degree angle
● 8 feet long
● All door styles feature solid wood finished to ● All door styles feature solid wood finished to
match cabinet exterior match cabinet exterior
● 8 feet long ● 8 feet long
Maximum Trim
A (1 1
⁄2” each end)
A Maximum Trim V30 CR 30 1⁄4” 27 1
⁄4”
V48 AP 48 1⁄4” 18” (15 1⁄8” each end) V36 CR 36 ⁄4” 33
1 1
⁄4”
V72 AP 72 1⁄4” 18” (27 1⁄8” each end) V42 CR 42 1⁄4” 39 1
⁄4”
V48 CR 48 1⁄4” 45 1
⁄4”
V60 CR 60 1⁄4” 57 1
⁄4”
V72 CR 72 1⁄4” 69 1
⁄4”
V48 AP V30 CR
V72 AP V36 CR
V42 CR
V48 CR
● Field trimmable V60 CR
● Features solid wood finished to match cabinet V72 CR
exterior
● Field trimmable
● Features solid wood finished to match cabinet
exterior
● Dimension from height of arch to top of valance
is 2 1⁄4”
PANELS, FILLERS & DECORATIVE ITEMS
Maximum Trim
A (3 1
⁄8” each end)
Maximum Trim V30 SH 30 1⁄4” 24”
A (61⁄8” each end) V36 SH 36 1⁄4” 30”
V36 AR 36 1⁄4” 24” V42 SH 42 1⁄4” 36”
V48 AR 48 1⁄4” 36” V48 SH 48 1⁄4” 42”
V60 AR 60 1⁄4” 48” V60 SH 60 1⁄4” 54”
V72 AR 72 1⁄4” 60” V72 SH 72 1⁄4” 66”
V36 AR V30 SH
V48 AR V36 SH
V60 AR V42 SH
V72 AR V48 SH
V60 SH
V72 SH
● Field trimmable
● Features solid wood finished to match cabinet ● Field trimmable
exterior ● Features solid wood finished to match cabinet
● Dimension from height of arch to top of valance
exterior
is 2 1⁄8” ● Dimension from height of arch to top of valance
is 2 1⁄4”
V36 RP V36 SC
V42 RP V48 SC
V48 RP V60 SC
V60 RP V72 SC
V72 RP
● Dimension from height of arch to top of valance two scallops (as shown above)
is 8 1⁄2” ● V60 SC and V72 SC feature three points and four
scallops
A A
V48 S 48 1⁄4” V36 T 36 1⁄4”
V72 S 72 1⁄4” V72 T 72 1⁄4”
V96 T 96 1⁄4”
V48 S V36 T
V72 S V72 T
V96 T
SHPO
SSO LSO
SGO GRPO
ASC ASPO
exterior
ATL FCL
● Solid wood finished to match cabinet exterior ● Solid wood finished to match cabinet exterior
● Designed as toe kick accent ● Field trimmable to 4” high
TPL BTL
● Solid wood finished to match cabinet exterior ● Solid wood finished to match cabinet exterior
● Field trimmable to 4” high ● Field trimmable to 28 1⁄2” high
BSQL BTPL
● Solid wood finished to match cabinet exterior ● Solid wood finished to match cabinet exterior
● Field trimmable ● Tapered on all sides
● Field trimmable
POST234 F POST234 B
● Solid wood with fluted round post ● Solid wood with beaded round post
● Finished to match cabinet exterior ● Finished to match cabinet exterior
● Field trimmable to 28 1⁄ 2” high ● Field trimmable to 28 1⁄ 2” high
Beaded (B)
● Solid wood finished to match cabinet exterior ● Solid wood finished to match cabinet exterior
● For floor or wall application ● For floor application
● Must be mounted to a Universal Filler – ● Must be mounted to a Universal Filler –
Fluted (F)
Plain (P)
order separately
Metal
● Installation screws are Phillips panhead ● Metal and MFD shelf rests are nickel plated steel
2 1⁄2” long ● MFD shelf rests are six position adjustable for
● Cover caps used to conceal head of alignment of shelf with mullion
installation screw ● Clip Lock shelf rests are molded clear
high-strength polycarbonate
PANELS, FILLERS & DECORATIVE ITEMS
STAIN PINT
STAIN QUART
STAIN TOP COAT PINT
STAIN TOP COAT QUART
Decorative Hardware
• Shenandoah Value Series does not recommend drilling through any door/drawer joint for installation
of decorative hardware
• Door and drawer fronts must be adjusted before installing decorative hardware
• Some decorative hardware has restrictions for use on certain door styles which will be indicated
with restriction specific icons followed by the door style(s) that have the restriction.
Example:
Explanation: This specific hardware is not recommended on 12" drawers for any door style.
178 DECORATIVE HARDWARE: Knobs & Pulls
Classic
Classic Pull Graphite Classic Pull Satin Nickel Classic Pull Satin Brass Classic Pull Patina
PULL 3172G PULL 3172SN PULL 3172SB PULL 3172P
3” Center 3” Center 3” Center 3” Center
Overall Length – 5 5⁄16” Overall Length – 5 5⁄16” Overall Length – 5 5⁄16” Overall Length – 5 5⁄16”
Classic Knob Graphite Classic Knob Satin Nickel Classic Knob Satin Brass Classic Knob Patina
KNOB 3173G KNOB 3173SN KNOB 3173SB KNOB 3173P
Button
Button Knob Graphite Button Knob Satin Nickel Button Knob Satin Brass Button Knob Patina
KNOB 3213G KNOB 3213SN KNOB 3213SB KNOB 3213P
Tansu
Large Tansu Pull Venetian Bronze Small Tansu Pull Venetian Bronze Tansu Knob Venetian Bronze
PULL 3332VB PULL 3331VB KNOB 3330VB
DECORATIVE HARDWARE
Forged
Barrel
Large Barrel Pull Venetian Bronze Small Barrel Pull Venetian Bronze Large Barrel Pull Antique Pewter Copper Small Barrel Pull Antique Pewter Copper
PULL 3079VB PULL 3078VB PULL 3079APC PULL 3078APC
5” Center 3 3⁄4” Center 5” Center 3 3⁄4” Center
Overall Length – 5 11⁄16” Overall Length – 4 5⁄16” Overall Length – 5 11⁄16” Overall Length – 4 5⁄16”
Beveled Craftsman
Beveled Knob Venetian Bronze Beveled Knob Iron Oxide Beveled Knob Antique Pewter Copper Craftsman Pull Matte Black
KNOB 3103VB KNOB 3103IO KNOB 3103APC PULL 3104MB
3” Center
Overall Length – 4 5⁄8”
Beveled Knob Matte Black Beveled Knob French Nickel Beveled Knob Pewter
KNOB 3103MB KNOB 3103FN KNOB 3103PW
Twist
Twist Pull French Nickel Twist Knob French Nickel Twist Pull Venetian Bronze Twist Knob Venetian Bronze
PULL 3101FN KNOB 3102FN PULL 3101VB KNOB 3102VB
DECORATIVE HARDWARE
5” Center 5” Center
Overall Length – 5 13⁄16” Overall Length – 5 13⁄16”
Suffolk Rustic
Suffolk Twist Pull Brushed Tin Suffolk Knob Brushed Tin Rustic Pull Rubbed Bronze Rustic Knob Rubbed Bronze
PULL 3328BT KNOB 3327BT PULL 3337RB KNOB 3336RB
5” Center 5” Center
Overall Length – 5 15⁄16” Overall Length – 6”
Large Slotted Steel Pull Satin Nickel Small Slotted Steel Pull Satin Nickel Cup Pull Satin Nickel Toggle Knob Satin Nickel
PULL 3124SN PULL 3123SN PULL 3105SN KNOB 3239SN
5” Center 3” Center 3” Center
Overall Length – 7” Overall Length – 4 1⁄2” Overall Length – 4 5⁄8”
Flat Contour
Flat Contour Pull Satin Nickel Flat Contour Pull Weathered Nickel Flat Contour Pull Oiled Bronze
PULL 3230SN PULL 3230WN PULL 3230OB
33⁄4” Center 33⁄4” Center 33⁄4” Center
Overall Length – 5 1⁄4” Overall Length – 5 1⁄4” Overall Length – 5 1⁄4”
Rope
Rope Knob Satin Nickel Rope Knob Weathered Nickel Rope Knob Oiled Bronze
KNOB 3231SN KNOB 3231WN KNOB 3231OB
Steel Bow Pull Satin Nickel Steel Bow Pull Venetian Bronze Crescent Pull Venetian Bronze
DECORATIVE HARDWARE
Bar
Large Bar Pull Satin Nickel Medium Bar Pull Satin Nickel Small Bar Pull Satin Nickel
PULL 3370SN PULL 3360SN PULL 3350SN
11 1⁄4” Center 6 1⁄4” Center 3” Center
Overall Length – 13 11⁄16” Overall Length – 8 3⁄4” Overall Length – 5 3⁄8”
NR12 Any door style
DECORATIVE HARDWARE: Knobs & Pulls 181
Fluted Pull Antique Cream Fluted Knob Antique Cream Roundel Knob Antique Cream Four-Square Knob Antique Cream
PULL 3342CRM KNOB 3341CRM KNOB 3340CRM KNOB 3345CRM
33⁄4” Center
Overall Length – 4 1⁄4”
Eclipse Knob Satin Nickel Pyramid Knob Satin Nickel Large Parquet Knob Black Small Parquet Knob Black
KNOB 3391SN KNOB 3399SN KNOB 3322B KNOB 3321B
Oak Leaf
Oak Leaf Pull Antique Bronze Oak Leaf Cup Pull Antique Bronze Oak Leaf Knob Antique Bronze
PULL 3218AB PULL 3217AB KNOB 3216AB
3” Center 3” or 3 3⁄4” Center
Overall Length – 4 1⁄2” Overall Length – 5 1⁄16”
Tab Pulls
1 3⁄4” Brushed Nickel Tab Pull 3” Brushed Nickel Tab Pull 6” Brushed Nickel Tab Pull 9” Brushed Nickel Tab Pull
DECORATIVE HARDWARE
PULL 1052BN PULL 1057BN PULL 1061BN PULL 1065BN
1 1⁄4” Center 2 1⁄4” Center 4 1⁄2” Center 6 3⁄4” Center
Overall Length – 1 3⁄4” Overall Length – 3” Overall Length – 6” Overall Length – 9”
DECORATIVE HARDWARE
Parts Directory
Wall Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186 Desk & Office Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186 With Factory Installed Wastebasket(s) . . . . . . . . . . . . . . . . . . . . 210
With Spice Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Desk Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Peninsula . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 File Drawer Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Wall Top Hinge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Desk Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Blind . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192 Kneehole Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
PARTS: DIRECTORY
PARTS: LEGEND
Open Frame Door (Wall Cabinet, Utility/Vanity Linen top doors only)
DROF__
Example: DROF1230 CA R
SKU Qty †Part Name Dimensions Dimensions Qty *Part Name Dimensions
STANDARD WALL • 42” HIGH
W942 1 DR942 8 9/16” x 41 1/2” 6 7/8” x 40” 3 9’’ SHELF 7 1/4” x 10 1/4” x 1/2”
PARTS: WALL CABINETS
W1242 1 DR1242 11 9/16” x 41 1/2” 9 7/8” x 40” 3 12’’ SHELF 10 1/4” x 10 1/4” x 1/2”
W1542 1 DR1542 14 9/16” x 41 1/2” 12 7/8” x 40” 3 15’’ SHELF 13 1/4” x 10 1/4” x 1/2”
W1842 1 DR1842 17 9/16” x 41 1/2” 15 7/8” x 40” 3 18’’ SHELF 16 1/4” x 10 1/4” x 1/2”
W2142 1 DR2142 20 9/16” x 41 1/2” 18 7/8” x 40” 3 21’’ SHELF 19 1/4” x 10 1/4” x 1/2”
W2442 2 DR1242 11 9/16” x 41 1/2” 9 7/8” x 40” 3 24’’ SHELF 22 1/4” x 10 1/4” x 1/2”
W2742 2 DR1342 13 1/16” x 41 1/2” 11 3/8” x 40” 3 27’’ SHELF ADJ 25 1/4” x 10 1/4” x 1/2”
W3042 2 DR1542 14 9/16” x 41 1/2” 12 7/8” x 40” 3 30’’ SHELF ADJ 28 1/4” x 10 1/4” x 1/2”
W3342 2 DR1642 16 1/16” x 41 1/2” 14 3/8” x 40” 3 33’’ SHELF ADJ 31 1/4” x 10 1/4” x 1/2”
W3642 2 DR1842 17 9/16” x 41 1/2” 15 7/8” x 40” 3 36’’ SHELF ADJ 34 1/4” x 10 1/4” x 1/2”
STANDARD WALL • 36” HIGH
W936 1 DR936 8 9/16” x 35 1/2” 6 7/8” x 34” 2 9’’ SHELF 7 1/4” x 10 1/4” x 1/2”
W1236 1 DR1236 11 9/16” x 35 1/2” 9 7/8” x 34” 2 12’’ SHELF 10 1/4” x 10 1/4” x 1/2”
W1536 1 DR1536 14 9/16” x 35 1/2” 12 7/8” x 34” 2 15’’ SHELF 13 1/4” x 10 1/4” x 1/2”
W1836 1 DR1836 17 9/16” x 35 1/2” 15 7/8” x 34” 2 18’’ SHELF 16 1/4” x 10 1/4” x 1/2”
W2136 1 DR2136 20 9/16” x 35 1/2” 18 7/8” x 34” 2 21’’ SHELF 19 1/4” x 10 1/4” x 1/2”
W2436 2 DR1236 11 9/16” x 35 1/2” 9 7/8” x 34” 2 24’’ SHELF 22 1/4” x 10 1/4” x 1/2”
W2736 2 DR1336 13 1/16” x 35 1/2” 11 3/8” x 34” 2 27’’ SHELF ADJ 25 1/4” x 10 1/4” x 1/2”
W3036 2 DR1536 14 9/16” x 35 1/2” 12 7/8” x 34” 2 30’’ SHELF ADJ 28 1/4” x 10 1/4” x 1/2”
W3336 2 DR1636 16 1/16” x 35 1/2” 14 3/8” x 34” 2 33’’ SHELF ADJ 31 1/4” x 10 1/4” x 1/2”
W3636 2 DR1836 17 9/16” x 35 1/2” 15 7/8” x 34” 2 36’’ SHELF ADJ 34 1/4” x 10 1/4” x 1/2”
STANDARD WALL • 30” HIGH
W930 1 DR930 8 9/16” x 29 1/2” 6 7/8” x 28” 2 9’’ SHELF 7 1/4” x 10 1/4” x 1/2”
W1230 1 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 2 12’’ SHELF 10 1/4” x 10 1/4” x 1/2”
W1530 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 2 15’’ SHELF 13 1/4” x 10 1/4” x 1/2”
W1830 1 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 2 18’’ SHELF 16 1/4” x 10 1/4” x 1/2”
W2130 1 DR2130 20 9/16” x 29 1/2” 18 7/8” x 28” 2 21’’ SHELF 19 1/4” x 10 1/4” x 1/2”
W2430 1 DR2430 23 9/16” x 29 1/2” 21 7/8” x 28” 2 24’’ SHELF 22 1/4” x 10 1/4” x 1/2”
W2430 1B 2 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 2 24’’ SHELF 22 1/4” x 10 1/4” x 1/2”
W2730 2 DR1330 13 1/16” x 29 1/2” 11 3/8” x 28” 2 27’’ SHELF ADJ 25 1/4” x 10 1/4” x 1/2”
W3030 2 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 2 30’’ SHELF ADJ 28 1/4” x 10 1/4” x 1/2”
W3330 2 DR1630 16 1/16” x 29 1/2” 14 3/8” x 28” 2 33’’ SHELF ADJ 31 1/4” x 10 1/4” x 1/2”
W3630 2 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 2 36’’ SHELF ADJ 34 1/4” x 10 1/4” x 1/2”
W3930 2 DR1930 19 1/16” x 29 1/2” 17 3/8” x 28” 2 39’’ SHELF ADJ 37 1/4” x 10 1/4” x 1/2”
W4230 2 DR2130 20 9/16” x 29 1/2” 18 7/8” x 28” 2 42’’ SHELF ADJ 40 1/4” x 10 1/4” x 1/2”
W4530 3 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 2 45’’ SHELF ADJ 43 1/4” x 10 1/4” x 1/2”
W4830 2 DR2430 23 9/16” x 29 1/2” 21 7/8” x 28” 2 48’’ SHELF ADJ 46 1/4” x 10 1/4” x 1/2”
STANDARD WALL • 27” HIGH
W3027 2 DR1527 14 9/16” x 26 1/2” 12 7/8” x 25” 1 30’’ SHELF ADJ 28 1/4” x 10 1/4” x 1/2”
†Cathedral door styles must be ordered hinged left or right
PARTS DIRECTORY: Wall Cabinets 187
DECORATIVE GLASS INSERT
MULLION FRAME (MF)
Full Overlay Standard Overlay
OPEN FRAME (OF)
DOORS
Same Dimensions as Q3WRA, I3W Q5, R5, P5, P1, Q1, R1
Standard Door
SKU Qty †Part Name Part Name Dimensions Part Name Dimensions
STANDARD WALL • 42” HIGH
W942 N/A N/A N/A
† Mullion Frame or Open Frame Cathedral door styles must be ordered hinged left or right Shenandoah Value Series™ Parts Directory
188 PARTS DIRECTORY: Wall Cabinets
DOOR ADJUSTABLE SHELF
Full Overlay Standard Overlay
*For Matching Interior Adjustable Shelf,
Q3WRA, I3W Q5, R5, P5, P1, Q1, R1 refer to Parts Directory legend
SKU Qty †Part Name Dimensions Dimensions Qty *Part Name Dimensions
STANDARD WALL • 24” HIGH
W1224 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 12’’ SHELF 10 1/4” x 10 1/4” x 1/2”
PARTS: WALL CABINETS
W1524 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15’’ SHELF 13 1/4” x 10 1/4” x 1/2”
W1824 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18’’ SHELF 16 1/4” x 10 1/4” x 1/2”
W2124 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 21’’ SHELF 19 1/4” x 10 1/4” x 1/2”
W2424 1B 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 24’’ SHELF 22 1/4” x 10 1/4” x 1/2”
W2724 2 DR1324 13 1/16” x 23 7/8” 11 3/8” x 22 3/8” 1 27’’ SHELF ADJ 25 1/4” x 10 1/4” x 1/2”
W3024 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 30’’ SHELF ADJ 28 1/4” x 10 1/4” x 1/2”
W3324 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 1 33’’ SHELF ADJ 31 1/4” x 10 1/4” x 1/2”
W3624 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 36’’ SHELF ADJ 34 1/4” x 10 1/4” x 1/2”
W3924 2 DR1924 19 1/16” x 23 7/8” 17 3/8” x 22 3/8” 1 39’’ SHELF ADJ 37 1/4” x 10 1/4” x 1/2”
W4224 2 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 42’’ SHELF ADJ 40 1/4” x 10 1/4” x 1/2”
W4524 3 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 45’’ SHELF ADJ 43 1/4” x 10 1/4” x 1/2”
STANDARD WALL • 21” HIGH
W3021 2 DR1521 14 9/16” x 20” 12 7/8” x 18 1/2” N/A
W3321 2 DR1621 16 1/16” x 20” 14 3/8” x 18 1/2” N/A
W3621 2 DR1821 17 9/16” x 20” 15 7/8” x 18 1/2” N/A
STANDARD WALL • 18” HIGH
W1818 1 DR1818 17 9/16” x 17 1/2” 15 7/8” x 16” N/A
W2118 1 DR2118 20 9/16” x 17 1/2” 18 7/8” x 16” N/A
W2418 2 DR1218 11 9/16” x 17 1/2” 9 7/8” x 16” N/A
W2718 2 DR1318 13 1/16” x 17 1/2” 11 3/8” x 16” N/A
W3018 2 DR1518 14 9/16” x 17 1/2” 12 7/8” x 16” N/A
W3318 2 DR1618 16 1/16” x 17 1/2” 14 3/8” x 16” N/A
W3618 2 DR1818 17 9/16” x 17 1/2” 15 7/8” x 16” N/A
W3918 2 DR1918 19 1/16” x 17 1/2” 17 3/8” x 16” N/A
W4218 2 DR2118 20 9/16” x 17 1/2” 18 7/8” x 16” N/A
STANDARD WALL • 15” HIGH
W3015 2 DR1515 14 9/16” x 14 1/2” 12 7/8” x 13” N/A
W3315 2 DR1615 16 1/16” x 14 1/2” 14 3/8” x 13” N/A
W3615 2 DR1815 17 9/16” x 14 1/2” 15 7/8” x 13” N/A
W3915 2 DR1915 19 1/16” x 14 1/2” 17 3/8” x 13” N/A
STANDARD WALL • 12” HIGH
W3012 2 DR1512 14 9/16” x 11 1/2” 12 7/8” x 10” N/A
W3312 2 DR1612 16 1/16” X 11 1/2” 14 3/8” X 10” N/A
W3612 2 DR1812 17 9/16” x 11 1/2” 15 7/8” x 10” N/A
W3912 2 DR1912 19 1/16” x 11 1/2” 17 3/8” x 10” N/A
WALL WITH SPICE RACK • 42” HIGH
W1542 SR 1 DR1542 14 9/16” x 41 1/2” 12 7/8” x 40” 3 15’’ SHELF 13 1/4” x 10 1/4” x 1/2”
W1842 SR 1 DR1842 17 9/16” x 41 1/2” 15 7/8” x 40” 3 18’’ SHELF 16 1/4” x 10 1/4” x 1/2”
W2142 SR 1 DR2142 20 9/16” x 41 1/2” 18 7/8” x 40” 3 21’’ SHELF 19 1/4” x 10 1/4” x 1/2”
WALL WITH SPICE RACK • 36” HIGH
W1536 SR 1 DR1536 14 9/16” x 35 1/2” 12 7/8” x 34” 2 15’’ SHELF 13 1/4” x 10 1/4” x 1/2”
W1836 SR 1 DR1836 17 9/16” x 35 1/2” 15 7/8” x 34” 2 18’’ SHELF 16 1/4” x 10 1/4” x 1/2”
W2136 SR 1 DR2136 20 9/16” x 35 1/2” 18 7/8” x 34” 2 21’’ SHELF 19 1/4” x 10 1/4” x 1/2”
WALL WITH SPICE RACK • 30” HIGH
W1530 SR 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 2 15’’ SHELF 13 1/4” x 10 1/4” x 1/2”
W1830 SR 1 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 2 18’’ SHELF 16 1/4” x 10 1/4” x 1/2”
W2130 SR 1 DR2130 20 9/16” x 29 1/2” 18 7/8” x 28” 2 21’’ SHELF 19 1/4” x 10 1/4” x 1/2”
†Cathedral door styles must be ordered hinged left or right
PARTS DIRECTORY: Wall Cabinets 189
DECORATIVE GLASS INSERT
MULLION FRAME (MF)
Full Overlay Standard Overlay
OPEN FRAME (OF)
DOORS
Same Dimensions as Q3WRA, I3W Q5, R5, P5, P1, Q1, R1
Standard Door
SKU Qty †Part Name Part Name Dimensions Part Name Dimensions
STANDARD WALL • 24” HIGH
W1224 1 DR__1224 DGI-1224F 7 9/16” x 19 7/8” DGI-1224S 6 21/64” x 18 49/64”
SKU Qty †Part Name Dimensions Dimensions Qty *Part Name Dimensions
WALL TOP HINGE • 15” HIGH
WTH3015 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” N/A
PARTS: WALL CABINETS
SKU Qty †Part Name Part Name Dimensions Part Name Dimensions
WALL TOP HINGE • 15” HIGH
WTH3015 1 DROF1530 DGI-1530F 10 9/16” x 25 1/2” DGI-1530S 9 21/64” x 24 25/64”
† Mullion Frame or Open Frame Cathedral door styles must be ordered hinged left or right Shenandoah Value Series™ Parts Directory
192 PARTS DIRECTORY: Wall Cabinets
DOOR ADJUSTABLE SHELF
Full Overlay Standard Overlay
*For Matching Interior Adjustable Shelf,
Q3WRA, I3W Q5, R5, P5, P1, Q1, R1 refer to Parts Directory legend
SKU Qty †Part Name Dimensions Dimensions Qty *Part Name Dimensions
BLIND WALL • 42” HIGH
BLW24/2742 1 DR1242 11 9/16” x 41 1/2” 9 7/8” x 40” 3 24’’ SHELF 22 1/4” x 10 1/4” x 1/2”
PARTS: WALL CABINETS
BLW30/3342 1 DR1842 17 9/16” x 41 1/2” 15 7/8” x 40” 3 30’’ SHELF ADJ 28 1/4” x 10 1/4” x 1/2”
BLW33/3642 1 DR2142 20 9/16” x 41 1/2” 18 7/8” x 40” 3 33’’ SHELF ADJ 31 1/4” x 10 1/4” x 1/2”
BLW36/3942 2 DR1242 11 9/16” x 41 1/2” 9 7/8” x 40” 3 36’’ SHELF ADJ 34 1/4” x 10 1/4” x 1/2”
BLW39/4242 2 DR1342 13 1/16” x 41 1/2” 11 3/8” x 40” 3 39’’ SHELF ADJ 37 1/4” x 10 1/4” x 1/2”
BLW42/4542 2 DR1542 14 9/16” x 41 1/2” 12 7/8” x 40” 3 42’’ SHELF ADJ 40 1/4” x 10 1/4” x 1/2”
BLIND WALL • 36” HIGH
BLW24/2736 1 DR1236 11 9/16” x 35 1/2” 9 7/8” x 34” 2 24’’ SHELF 22 1/4” x 10 1/4” x 1/2”
BLW30/3336 1 DR1836 17 9/16” x 35 1/2” 15 7/8” x 34” 2 30’’ SHELF ADJ 28 1/4” x 10 1/4” x 1/2”
BLW33/3636 1 DR2136 20 9/16” x 35 1/2” 18 7/8” x 34” 2 33’’ SHELF ADJ 31 1/4” x 10 1/4” x 1/2”
BLW36/3936 2 DR1236 11 9/16” x 35 1/2” 9 7/8” x 34” 2 36’’ SHELF ADJ 34 1/4” x 10 1/4” x 1/2”
BLW39/4236 2 DR1336 13 1/16” x 35 1/2” 11 3/8” x 34” 2 39’’ SHELF ADJ 37 1/4” x 10 1/4” x 1/2”
BLW42/4536 2 DR1536 14 9/16” x 35 1/2” 12 7/8” x 34” 2 42’’ SHELF ADJ 40 1/4” x 10 1/4” x 1/2”
BLIND WALL • 30” HIGH
BLW24/2730 1 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 2 24’’ SHELF 22 1/4” x 10 1/4” x 1/2”
BLW27/3030 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 2 27’’ SHELF ADJ 25 1/4” x 10 1/4” x 1/2”
BLW30/3330 1 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 2 30’’ SHELF ADJ 28 1/4” x 10 1/4” x 1/2”
BLW33/3630 1 DR2130 20 9/16” x 29 1/2” 18 7/8” x 28” 2 33’’ SHELF ADJ 31 1/4” x 10 1/4” x 1/2”
BLW36/3930 1 DR2430 23 9/16” x 29 1/2” 21 7/8” x 28” 2 36’’ SHELF ADJ 34 1/4” x 10 1/4” x 1/2”
BLW39/4230 2 DR1330 13 1/16” x 29 1/2” 11 3/8” x 28” 2 39’’ SHELF ADJ 37 1/4” x 10 1/4” x 1/2”
BLW42/4530 2 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 2 42’’ SHELF ADJ 40 1/4” x 10 1/4” x 1/2”
BLW45/4830 2 DR1630 16 1/16” x 29 1/2” 14 3/8” x 28” 2 45’’ SHELF ADJ 43 1/4” x 10 1/4” x 1/2”
BLW48/5130 2 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 2 48’’ SHELF ADJ 46 1/4” x 10 1/4” x 1/2”
BLIND WALL • 24” HIGH
BLW24/2724 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 24’’ SHELF 22 1/4” x 10 1/4” x 1/2”
BLW27/3024 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 27’’ SHELF ADJ 25 1/4” x 10 1/4” x 1/2”
BLW30/3324 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 30’’ SHELF ADJ 28 1/4” x 10 1/4” x 1/2”
BLW33/3624 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 33’’ SHELF ADJ 31 1/4” x 10 1/4” x 1/2”
BLW36/3924 1B 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 36’’ SHELF ADJ 34 1/4” x 10 1/4” x 1/2”
BLIND PENINSULA WALL
BLPW2442 3 DR1242 11 9/16” x 41 1/2” 9 7/8” x 40” 3 24” SHELF PW 22 1/4” x 10 1/4” x 1/2”
BLPW2436 3 DR1236 11 9/16” x 35 1/2” 9 7/8” x 34” 2 24” SHELF PW 22 1/4” x 10 1/4” x 1/2”
BLPW2430 1B 3 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 2 24” SHELF PW 22 1/4” x 10 1/4” x 1/2”
BLPW2424 1B 3 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 24” SHELF PW 22 1/4” x 10 1/4” x 1/2”
†Cathedral door styles must be ordered hinged left or right
PARTS DIRECTORY: Wall Cabinets 193
DECORATIVE GLASS INSERT
MULLION FRAME (MF)
Full Overlay Standard Overlay
OPEN FRAME (OF)
DOORS
Same Dimensions as Q3WRA, I3W Q5, R5, P5, P1, Q1, R1
Standard Door
SKU Qty †Part Name Part Name Dimensions Part Name Dimensions
BLIND WALL • 42” HIGH
BLW24/2742 1 DR__1242 DGI-1242F 7 9/16” x 37 1/2” DGI-1242S 6 21/64” x 36 25/64”
SKU Qty †Part Name Dimensions Dimensions Qty *Part Name Dimensions
CORNER WALL WITH TAMBOUR • 48” HIGH
CWT2448 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 2 CW SHELF ADJ
PARTS: WALL CABINETS
†Cathedral door styles must be ordered hinged left or right
PARTS DIRECTORY: Wall Cabinets 195
DECORATIVE GLASS INSERT
MULLION FRAME (MF)
Full Overlay Standard Overlay
OPEN FRAME (OF)
DOORS
Same Dimensions as Q3WRA, I3W Q5, R5, P5, P1, Q1, R1
Standard Door
SKU Qty †Part Name Part Name Dimensions Part Name Dimensions
CORNER WALL WITH TAMBOUR • 48” HIGH
CWT2448 1 DR__1530 DGI-1530F 10 9/16” x 25 1/2” DGI-1530S 9 21/64” x 24 25/64”
† Mullion Frame or Open Frame Cathedral door styles must be ordered hinged left or right Shenandoah Value Series™ Parts Directory
196 PARTS DIRECTORY: Wall Cabinets
DOOR ADJUSTABLE SHELF
Full Overlay Standard Overlay
*For Matching Interior Adjustable Shelf,
Q3WRA, I3W Q5, R5, P5, P1, Q1, R1 refer to Parts Directory legend
SKU Qty †Part Name Dimensions Dimensions Qty *Part Name Dimensions
REFRIGERATOR WALL • 27” HIGH X 24” DEEP
W3027 X 24 DP 2 DR1527 14 9/16” x 26 1/2” 12 7/8” x 25” 1 30’’ SHELF ADJ 28 1/4” x 10 1/4” x 1/2”
PARTS: WALL CABINETS
SKU Qty †Part Name Part Name Dimensions Part Name Dimensions
REFRIGERATOR WALL • 27” HIGH X 24” DEEP
W3027 X 24 DP N/A N/A N/A
† Mullion Frame or Open Frame Cathedral door styles must be ordered hinged left or right Shenandoah Value Series™ Parts Directory
198 PARTS DIRECTORY: Glass Inserts
GLASS INSERT SIZES AND NOMENCLATURE
Full Overlay Standard Overlay
SKU Qty Part Name Dimensions Dimensions Qty Part Name Dimensions
STANDARD BASE
B12 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 12’’ SHELF 10 1/4” x 10 1/4” x 1/2”
B15 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15’’ SHELF 13 1/4” x 10 1/4” x 1/2”
B18 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18’’ SHELF 16 1/4” x 10 1/4” x 1/2”
B21 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 21’’ SHELF 19 1/4” x 10 1/4” x 1/2”
B24 1 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 1 24’’ SHELF 22 1/4” x 10 1/4” x 1/2”
B24 1B 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 24’’ SHELF 22 1/4” x 10 1/4” x 1/2”
B27 2 DR1324 13 1/16” x 23 7/8” 11 3/8” x 22 3/8” 1 27’’ SHELF ADJ 25 1/4” x 10 1/4” x 1/2”
B30 / B30 1B 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 30’’ SHELF ADJ 28 1/4” x 10 1/4” x 1/2”
B33 / B33 1B 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 1 33’’ SHELF ADJ 31 1/4” x 10 1/4” x 1/2”
B36 / B36 1B 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 36’’ SHELF ADJ 34 1/4” x 10 1/4” x 1/2”
B36 1TD / B36 1B 1TD 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 36’’ SHELF ADJ 34 1/4” x 10 1/4” x 1/2”
PARTS: BASE CABINETS
B39 2 DR1924 19 1/16” x 23 7/8” 17 3/8” x 22 3/8” 1 39’’ SHELF ADJ 37 1/4” x 10 1/4” x 1/2”
B42 2 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 42’’ SHELF ADJ 40 1/4” x 10 1/4” x 1/2”
B45 3 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 45’’ SHELF ADJ 43 1/4” x 10 1/4” x 1/2”
B48 2 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 1 48’’ SHELF ADJ 46 1/4” x 10 1/4” x 1/2”
BASE WITH ONE SLIDING SHELF
B12 SS1 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 SSK12 8 1/2” x 21 3/16” x 2”
B15 SS1 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 SSK15 11 1/2” x 21 3/16” x 2”
B18 SS1 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 SSK18 14 1/2” x 21 3/16” x 2”
B21 SS1 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 SSK21 17 1/2” x 21 3/16” x 2”
B24 SS1 1 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 1 SSK24 20 1/2” x 21 3/16” x 2”
B24 1B SS1 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 SSK24 20 1/2” x 21 3/16” x 2”
BASE WITH TWO HORIZONTAL SLIDING SHELVES
B27 SS1 2 DR1324 13 1/16” x 23 7/8” 11 3/8” x 22 3/8” 2 SSK13 10” x 21 3/16” x 2”
B30 SS1 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 SSK15 11 1/2” x 21 3/16” x 2”
B33 SS1 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 2 SSK16 13” x 21 3/16” x 2”
B36 SS1 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 SSK18 14 1/2” x 21 3/16” x 2”
B36 1TD SS1 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 SSK18 14 1/2” x 21 3/16” x 2”
B39 SS1 2 DR1924 19 1/16” x 23 7/8” 17 3/8” x 22 3/8” 2 SSK19 16” x 21 3/16” x 2”
B42 SS1 2 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 2 SSK21 17 1/2” x 21 3/16” x 2”
B48 SS1 2 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 2 SSK24 20 1/2” x 21 3/16” x 2”
BASE WITH THREE HORIZONTAL SLIDING SHELVES
B45 SS1 3 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 3 SSK15 11 1/2” x 21 3/16” x 2”
BASE WITH TWO VERTICAL SLIDING SHELVES
B12 SS2 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 2 SSK12 8 1/2” x 21 3/16” x 2”
B15 SS2 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 SSK15 11 1/2” x 21 3/16” x 2”
B18 SS2 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 SSK18 14 1/2” x 21 3/16” x 2”
B21 SS2 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 2 SSK21 17 1/2” x 21 3/16” x 2”
B24 SS2 1 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 2 SSK24 20 1/2” x 21 3/16” x 2”
B24 1B SS2 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 2 SSK24 20 1/2” x 21 3/16” x 2”
B30 1B SS2 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 SSK30 26 1/2” x 21 3/16” x 2”
B33 1B SS2 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 2 SSK33 29 1/2” x 21 3/16” x 2”
B36 1B SS2 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 SSK36 32 1/2” x 21 3/16” x 2”
B36 1B 1TD SS2 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 SSK36 32 1/2” x 21 3/16” x 2”
PARTS DIRECTORY: Base Cabinets 201
DRAWER/PANEL FRONT DRAWER BODY
Full Overlay Standard Overlay
SKU Qty Part Name Dimensions Dimensions Qty Part Name Dimensions
STANDARD BASE
B12 1 DDF12 11 9/16” x 5 13/16” 9 7/8” x 5 1/8” 1 DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
B15 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 X 18DP SG 10 23/32” x 3 5/8” x 18 1/2”
B18 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 X 18DP SG 13 23/32” x 3 5/8” x 18 1/2”
B21 1 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8” 1 DRB21 X 18DP SG 16 23/32” x 3 5/8” x 18 1/2”
B24 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 X 18DP SG 19 23/32” x 3 5/8” x 18 1/2”
B24 1B 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 X 18DP SG 19 23/32” x 3 5/8” x 18 1/2”
B27 1 DDF27 26 9/16” x 5 13/16” 24 7/8” x 5 1/8” 1 DRB27 X 18DP SG 22 23/32” x 3 5/8” x 18 1/2”
B30 / B30 1B 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8” 1 DRB30 X 18DP SG 25 23/32” x 3 5/8” x 18 1/2”
B33 / B33 1B 1 DDF33 32 9/16” x 5 13/16” 30 7/8” x 5 1/8” 1 DRB33 X 18DP SG 28 23/32” x 3 5/8” x 18 1/2”
B36 / B36 1B 2 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 2 DRB18 X 18DP SG 13 23/32” x 3 5/8” x 18 1/2”
B36 1TD / B36 1B 1TD 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8” 1 DRB36 X 18DP SG 31 23/32” x 3 5/8” x 18 1/2”
SKU Qty Part Name Dimensions Dimensions Qty Part Name Dimensions
BASE WITH FOUR SLIDING SHELVES
B27 SS2 2 DR1324 13 1/16” x 23 7/8” 11 3/8” x 22 3/8” 4 SSK13 10” x 21 3/16” x 2”
B30 SS2 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 4 SSK15 11 1/2” x 21 3/16” x 2”
B33 SS2 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 4 SSK16 13” x 21 3/16” x 2”
B36 SS2 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 4 SSK18 14 1/2” x 21 3/16” x 2”
B36 1TD SS2 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 4 SSK18 14 1/2” x 21 3/16” x 2”
B39 SS2 2 DR1924 19 1/16” x 23 7/8” 17 3/8” x 22 3/8” 4 SSK19 16” x 21 3/16” x 2”
B42 SS2 2 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 4 SSK21 17 1/2” x 21 3/16” x 2”
B48 SS2 2 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 4 SSK24 20 1/2” x 21 3/16” x 2”
BASE WITH SIX SLIDING SHELVES
B45 SS2 3 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 6 SSK15 11 1/2” x 21 3/16” x 2”
BASE WITH ROLL OUT TRAY DIVIDER
PARTS: BASE CABINETS
SKU Qty Part Name Dimensions Dimensions Qty Part Name Dimensions
BASE WITH FOUR SLIDING SHELVES
B27 SS2 1 DDF27 26 9/16” x 5 13/16” 24 7/8” x 5 1/8” 1 DRB27 X 18DP SG 22 23/32” x 3 5/8” x 18 1/2”
B30 SS2 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8” 1 DRB30 X 18DP SG 25 23/32” x 3 5/8” x 18 1/2”
B33 SS2 1 DDF33 32 9/16” x 5 13/16” 30 7/8” x 5 1/8” 1 DRB33 X 18DP SG 28 23/32” x 3 5/8” x 18 1/2”
B36 SS2 2 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 2 DRB18 X 18DP SG 13 23/32” x 3 5/8” x 18 1/2”
B36 1TD SS2 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8” 1 DRB36 X 18DP SG 31 23/32” x 3 5/8” x 18 1/2”
B39 SS2 2 DDF19 19 1/16” x 5 13/16” 17 3/8” x 5 1/8” 2 DRB19 X 18DP SG 15 7/32” x 3 5/8” x 18 1/2”
B42 SS2 2 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8” 2 DRB21 X 18DP SG 16 23/32” x 3 5/8” x 18 1/2”
B48 SS2 2 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 2 DRB24 X 18DP SG 19 23/32” x 3 5/8” x 18 1/2”
BASE WITH SIX SLIDING SHELVES
B45 SS2 3 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 3 DRB15 X 18DP SG 10 23/32” x 3 5/8” x 18 1/2”
BASE WITH ROLL OUT TRAY DIVIDER
SKU Qty Part Name Dimensions Part Name Dimensions Qty Part Name Dimensions
FULL-HEIGHT BASE
TB9 1 DRTB9 8 9/16” x 29 7/8” DR930 6 7/8” x 28” N/A
B12 FH 1 DR12FH 11 9/16” x 29 7/8” DR1230 9 7/8” x 28” 1 12” SHELF 10 1/4” x 10 1/4” x 1/2”
B15 FH 1 DR15FH 14 9/16” x 29 7/8” DR1530 12 7/8” x 28” 1 15” SHELF 13 1/4” x 10 1/4” x 1/2”
B18 FH 1 DR18FH 17 9/16” x 29 7/8” DR1830 15 7/8” x 28” 1 18” SHELF 16 1/4” x 10 1/4” x 1/2”
B21 FH 1 DR21FH 20 9/16” x 29 7/8” DR2130 18 7/8” x 28” 1 21” SHELF 19 1/4” x 10 1/4” x 1/2”
B24 1B FH 2 DR12FH 11 3/4” x 29 7/8” DR1230 9 7/8” x 28” 1 24” SHELF 22 1/4” x 10 1/4” x 1/2”
B30 1B FH 2 DR15FH 14 3/4” x 29 7/8” DR1530 12 7/8” x 28” 1 30” SHELF ADJ 28 1/4” x 10 1/4” x 1/2”
B36 1B FH 2 DR18FH 17 3/4” x 29 7/8” DR1830 15 7/8” x 28” 1 36” SHELF ADJ 34 1/4” x 10 1/4” x 1/2”
FULL-HEIGHT BASE WITH ACCESSORY
TB9 TDS 1 DRTB9 8 9/16” x 29 7/8” DR930 6 7/8” x 28” 1 9” SHELF 24DP 7 3/16” x 22 1/8” x 1/2”
BTDP9 1 DRBPP9 ND 8 9/16” x 29 7/8” DR930 ND 6 7/8” x 28” 1 BTDP9 KIT
PARTS: BASE CABINETS
SKU Qty Part Name Dimensions Part Name Dimensions Part Name Dimensions
BASE SPICE DRAWER CABINET
BSDC6 5 DDF SDC 5 11/16” x 5 1/2” x 1/2” DDF SDC 5 11/16” x 5 1/2” x 1/2” DRB6 BSDC6 4 29/32” x 22 15/16” x 4 3/4”
SPICE DRAWER CABINET
SDC18 3 DDF SDC 5 11/16” x 5 1/2” x 1/2” DDF SDC 5 11/16” x 5 1/2” x 1/2” DRB6 SDC30 4 29/32” x 10 15/16” x 4 3/4”
SDC24 4 DDF SDC 5 11/16” x 5 1/2” x 1/2” DDF SDC 5 11/16” x 5 1/2” x 1/2” DRB6 SDC30 4 29/32” x 10 15/16” x 4 3/4”
SDC30 5 DDF SDC 5 11/16” x 5 1/2” x 1/2” DDF SDC 5 11/16” x 5 1/2” x 1/2” DRB6 SDC30 4 29/32” x 10 15/16” x 4 3/4”
SDC36 6 DDF SDC 5 11/16” x 5 1/2” x 1/2” DDF SDC 5 11/16” x 5 1/2” x 1/2” DRB6 SDC30 4 29/32” x 10 15/16” x 4 3/4”
THREE DRAWER BASE CABINET
DB12 1 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8” DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
2 DDF12M 11 9/16” x 11 27/32” DDF12D 9 7/8” x 10 13/16” DRB12M X 18DP SG 7 23/32” x 7 3/4” x 18 1/2”
DB15 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 X 18DP SG 10 23/32” x 3 5/8” x 18 1/2”
2 DDF15M 14 9/16” x 11 27/32” DDF15D 12 7/8” x 10 13/16” DRB15M X 18DP SG 10 23/32” x 7 3/4” x 18 1/2”
Q3WRA, I3W Q5, R5, P5, P1, Q1, R1 Q3WRA, I3W Q5, R5, P5, P1, Q1, R1
SKU Qty Part Name Dimensions Dimensions Qty Part Name Dimensions Dimensions
CORNER SINK BASE
CSB36 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8”
CORNER SINK FRONT
CSF36 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8”
CSF42 1 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”
DEEP SINK BASE
DSB30 1B 2 DR1521 DSB 14 9/16” x 20” 12 7/8” x 17 7/8” N/A
DSB36 1B 2 DR1821 DSB 17 9/16” x 20” 15 7/8” x 17 7/8” N/A
SINK/RANGE BASE AND FRONT
SF12 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 DDF12 11 9/16” x 5 13/16” 9 7/8” x 5 1/8”
SF15 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8”
SB18 / SF18 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8”
PARTS: BASE CABINETS
SB21 / SF21 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8”
SB24 / SF24 1 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”
SB24 1B / SF24 1B 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”
SB27 / SF27 2 DR1324 13 1/16” x 23 7/8” 11 3/8” x 22 3/8” 1 DDF27 26 9/16” x 5 13/16” 24 7/8” x 5 1/8”
SB30 / SB30 1B / SF30 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”
SB33 / SB33 1B / SF33 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 1 DDF33 32 9/16” x 5 13/16” 30 7/8” x 5 1/8”
SB36 / SB36 1B / SF36 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8”
SB39 / SF39 2 DR1924 19 1/16” x 23 7/8” 17 3/8” x 22 3/8” 2 DDF19 19 1/16” x 5 13/16” 17 3/8” x 5 1/8”
SB42 / SF42 2 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 2 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8”
SB45 / SF45 3 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 3 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8”
SB48 / SF48 2 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 2 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”
SINK BASE WITH FACTORY INSTALLED TILT-OUT TRAY(S)
SB18 STO (TO) 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DDF18 DRILL 17 9/16” x 5 13/16” 15 7/8” x 5 1/8”
SB21 STO (TO) 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 DDF21 DRILL 20 9/16” x 5 13/16” 18 7/8” x 5 1/8”
SB24 STO (TO) 1 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 1 DDF24 DRILL 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”
SB24 1B STO (TO) 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 DDF24 DRILL 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”
SB27 STO (TO) 2 DR1324 13 1/16” x 23 7/8” 11 3/8” x 22 3/8” 1 DDF27 DRILL 26 9/16” x 5 13/16” 24 7/8” x 5 1/8”
SB30 STO (TO) 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DDF30 DRILL 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”
SB33 STO (TO) 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 1 DDF33 DRILL 32 9/16” x 5 13/16” 30 7/8” x 5 1/8”
SB36 STO (TO) 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DDF36 DRILL 35 9/16” x 5 13/16” 33 7/8” x 5 1/8”
SB39 STO (TO) 2 DR1924 19 1/16” x 23 7/8” 17 3/8” x 22 3/8” 2 DDF19 DRILL 19 1/16” x 5 13/16” 17 3/8” x 5 1/8”
SB42 STO (TO) 2 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 2 DDF21 DRILL 20 9/16” x 5 13/16” 18 7/8” x 5 1/8”
SB48 STO (TO) 2 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 2 DDF24 DRILL 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”
SINK BASE MULTI-STORAGE CABINET
SBMS30 1B STO 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DDF30 DRILL 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”
SBMS36 1B STO 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DDF18 DRILL 17 9/16” x 5 13/16” 15 7/8” x 5 1/8”
PARTS DIRECTORY: Corner Base Cabinets 207
DOOR PANEL FRONT
Full Overlay Standard Overlay
SKU Qty Part Name Dimensions Dimensions Qty Part Name Dimensions
DESK WITH FACTORY INSTALLED WASTEBASKET(S)
DWBT1821 1 DRDWBT1824 ND 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DWBT1821 KIT
DWBT1824 1 DRDWBT1824 ND 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DWBT1824 KIT
DESK DOOR • 21” DEEP
DDO1221 1 DR1218 11 9/16” x 17 1/2” 9 7/8” x 16” 1 VLC1221 SHELF ADJ 10 3/16” x 18 7/8” x 1/2”
DDO1521 1 DR1518 14 9/16” x 17 1/2” 12 7/8” x 16” 1 VLC1521 SHELF ADJ 13 3/16” x 18 7/8” x 1/2”
DDO1821 1 DR1818 17 9/16” x 17 1/2” 15 7/8” x 16” 1 VLC1821 SHELF ADJ 16 3/16” x 18 7/8” x 1/2”
DDO2121 1 DR2118 20 9/16” x 17 1/2” 18 7/8” x 16” 1 21’’ SHELF 21DP 19 3/16” x 18 7/8” x 1/2”
DDO2421 2 DR1218 11 9/16” x 17 1/2” 9 7/8” x 16” 1 24’’ SHELF 21DP 22 3/16” x 18 7/8” x 1/2”
DESK DOOR • 24” DEEP
DDO1224 1 DR1218 11 9/16” x 17 1/2” 9 7/8” x 16” 1 12’’ SHELF 24DP 10 3/16” x 22 1/8” x 1/2”
DDO1524 1 DR1518 14 9/16” x 17 1/2” 12 7/8” x 16” 1 15’’ SHELF 24DP 13 3/16” x 22 1/8” x 1/2”
PARTS: BASE CABINETS
DDO1824 1 DR1818 17 9/16” x 17 1/2” 15 7/8” x 16” 1 18” SHELF 24DP 16 3/16” x 22 1/8” x 1/2”
DDO2124 1 DR2118 20 9/16” x 17 1/2” 18 7/8” x 16” 1 21’’ SHELF 24DP 19 3/16” x 22 1/8” x 1/2”
DDO2424 2 DR1218 11 9/16” x 17 1/2” 9 7/8” x 16” 1 24’’ SHELF 24DP 22 3/16” x 22 1/8” x 1/2”
DESK DRAWER BASE CABINET • 21” DEEP
DDR1221 N/A N/A
DDR1521 N/A N/A
DDR1821 N/A N/A
DDR2121 N/A N/A
DDR2421 N/A N/A
DESK DRAWER BASE CABINET • 24” DEEP
DDR1224 N/A N/A
DDR1524 N/A N/A
DDR1824 N/A N/A
DDR2124 N/A N/A
DDR2424 N/A N/A
FILE DRAWER BASE CABINET
FDB1821 N/A N/A
FDB1824 N/A N/A
PARTS DIRECTORY: Desk Cabinets 209
DRAWER / PANEL FRONT DRAWER BODY
Full Overlay Standard Overlay
SKU Qty Part Name Dimensions Part Name Dimensions Part Name Dimensions
DESK WITH FACTORY INSTALLED WASTEBASKET(S)
DWBT1821 N/A N/A N/A
DWBT1824 N/A N/A N/A
DESK DOOR • 21” DEEP
DDO1221 1 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8” DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
DDO1521 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 X 18DP SG 10 23/32” x 3 5/8” x 18 1/2”
DDO1821 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” DRB18 X 18DP SG 13 23/32” x 3 5/8” x 18 1/2”
DDO2121 1 DDF21 20 9/16” x 5 13/16” DDF21 18 7/8” x 5 1/8” DRB21 X 18DP SG 16 23/32” x 3 5/8” x 18 1/2”
DDO2421 1 DDF24 23 9/16” x 5 13/16” DDF24 21 7/8” x 5 1/8” DRB24 X 18DP SG 19 23/32” x 3 5/8” x 18 1/2”
DESK DOOR • 24” DEEP
DDO1224 1 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8” DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
DDO1524 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 X 18DP SG 10 23/32” x 3 5/8” x 18 1/2”
SKU Qty †Part Name Dimensions Dimensions Qty *Part Name Dimensions
UTILITY WITH ADJUSTABLE SHELVES • 12” DEEP X 84” HIGH
UT1212 X 84 AS 1 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 5 S1212 10 1/4” x 10 1/4” x 3/4”
1 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4”
UT1512 X 84 AS 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 5 S1512 13 1/4” x 10 1/4” x 3/4”
1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”
UT1812 X 84 AS 1 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 5 S1812 16 1/4” x 10 1/4” x 3/4”
1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”
UT2412 X 84 AS 2 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 5 S2412 22 1/4” x 10 1/4” x 3/4”
2 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4”
UTILITY WITH ADJUSTABLE SHELVES • 12” DEEP X 90” HIGH
UT1512 X 90 AS 1 DR1536 14 9/16” x 35 1/2” 12 7/8” x 34” 6 S1512 13 1/4” x 10 1/4” x 3/4”
1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”
UT1812 X 90 AS 1 DR1836 17 9/16” x 35 1/2” 15 7/8” x 34” 6 S1812 16 1/4” x 10 1/4” x 3/4”
1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”
UT2412 X 90 AS 2 DR1236 11 9/16” x 35 1/2” 9 7/8” x 34” 6 S2412 22 1/4” x 10 1/4” x 3/4”
2 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4”
UTILITY WITH ADJUSTABLE SHELVES • 12” DEEP X 96” HIGH
UT1512 X 96 AS 1 DR1542 14 9/16” x 41 1/2” 12 7/8” x 40” 7 S1512 13 1/4” x 10 1/4” x 3/4”
1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”
UT1812 X 96 AS 1 DR1842 17 9/16” x 41 1/2” 15 7/8” x 40” 7 S1812 16 1/4” x 10 1/4” x 3/4”
1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”
PARTS: TALL CABINETS
UT2412 X 96 AS 2 DR1242 11 9/16” x 41 1/2” 9 7/8” x 40” 7 S2412 22 1/4” x 10 1/4” x 3/4”
2 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4”
UTILITY WITH ADJUSTABLE SHELVES • 24” DEEP X 84” HIGH
UT1224 X 84 AS 1 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 5 S1224 10 3/16” x 22 1/8” x 3/4”
1 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4”
UT1524 X 84 AS 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 5 S1524 13 3/16” x 22 1/8” x 3/4”
1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”
UT1824 X 84 AS 1 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 5 S1824 16 3/16” x 22 1/8” x 3/4”
1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”
UT2424 X 84 AS 2 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 5 S2424 22 3/16” x 22 1/8” x 3/4”
2 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4”
UT3024 X 84 AS 2 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 5 S3024 28 3/16” x 22 1/8” x 3/4”
2 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”
UT3624 X 84 AS 2 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 5 S3624 34 3/16” x 22 1/8” x 3/4”
2 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”
UTILITY WITH ADJUSTABLE SHELVES • 24” DEEP X 90” HIGH
UT1524 X 90 AS 1 DR1536 14 9/16” x 35 1/2” 12 7/8” x 34” 6 S1524 13 3/16” x 22 1/8” x 3/4”
1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”
UT1824 X 90 AS 1 DR1836 17 9/16” x 35 1/2” 15 7/8” x 34” 6 S1824 16 3/16” x 22 1/8” x 3/4”
1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”
UT2424 X 90 AS 2 DR1236 11 9/16” x 35 1/2” 9 7/8” x 34” 6 S2424 22 3/16” x 22 1/8” x 3/4”
2 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4”
UT3024 X 90 AS 2 DR1536 14 9/16” x 35 1/2” 12 7/8” x 34” 6 S3024 28 3/16” x 22 1/8” x 3/4”
2 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”
UT3624 X 90 AS 2 DR1836 17 9/16” x 35 1/2” 15 7/8” x 34” 6 S3624 34 3/16” x 22 1/8” x 3/4”
2 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”
†Cathedral door styles must be ordered hinged left or right
PARTS DIRECTORY: Utility Cabinets 211
DECORATIVE GLASS INSERT
MULLION FRAME (MF)
Full Overlay Standard Overlay
OPEN FRAME (OF)
DOORS
Same Dimensions as Q3WRA, I3W Q5, R5, P5, P1, Q1, R1
Standard Door
SKU Qty †Part Name Part Name Dimensions Part Name Dimensions
UTILITY WITH ADJUSTABLE SHELVES • 12” DEEP X 84” HIGH
UT1212 X 84 AS 1 DR_1230 DGI-1230F 7 9/16” x 25 1/2” DGI-1230S 6 21/64” x 24 25/64”
UT1512 X 84 AS 1 DR__1530 DGI-1530F 10 9/16” x 25 1/2” DGI-1530S 9 21/64” x 24 25/64”
UT1812 X 84 AS 1 DR__1830 DGI-1830F 13 9/16” x 25 1/2” DGI-1830S 12 21/64” x 24 25/64”
UT2412 X 84 AS 2 DR__1230 DGI-1230F 7 9/16” x 25 1/2” DGI-1230S 6 21/64” x 24 25/64”
UTILITY WITH ADJUSTABLE SHELVES • 12” DEEP X 90” HIGH
UT1512 X 90 AS 1 DR__1536 DGI-1536F 10 9/16” x 31 1/2” DGI-1536S 9 21/64” x 30 25/64”
UT1812 X 90 AS 1 DR__1836 DGI-1836F 13 9/16” x 31 1/2” DGI-1836S 12 21/64” x 30 25/64”
UT2412 X 90 AS 2 DR__1236 DGI-1236F 7 9/16” x 31 1/2” DGI-1236S 6 21/64” x 30 25/64”
UTILITY WITH ADJUSTABLE SHELVES • 12” DEEP X 96” HIGH
UT1512 X 96 AS 1 DR__1542 DGI-1542F 10 9/16” x 37 1/2” DGI-1542S 9 21/64” x 36 25/64”
UT1812 X 96 AS 1 DR__1842 DGI-1842F 13 9/16” x 37 1/2” DGI-1842S 12 21/64” x 36 25/64”
SKU Qty †Part Name Dimensions Dimensions Qty *Part Name Dimensions
UTILITY WITH ADJUSTABLE SHELVES • 24” DEEP X 96” HIGH
UT1524 X 96 AS 1 DR1542 14 9/16” x 41 1/2” 12 7/8” x 40” 7 S1524 13 3/16” x 22 1/8” x 3/4”
1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”
UT1824 X 96 AS 1 DR1842 17 9/16” x 41 1/2” 15 7/8” x 40” 7 S1824 16 3/16” x 22 1/8” x 3/4”
1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”
UT2424 X 96 AS 2 DR1242 11 9/16” x 41 1/2” 9 7/8” x 40” 7 S2424 22 3/16” x 22 1/8” x 3/4”
2 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4”
UT3024 X 96 AS 2 DR1542 14 9/16” x 41 1/2” 12 7/8” x 40” 7 S3024 28 3/16” x 22 1/8” x 3/4”
2 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”
UT3624 X 96 AS 2 DR1842 17 9/16” x 41 1/2” 15 7/8” x 40” 7 S3624 34 3/16” x 22 1/8” x 3/4”
2 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”
UTILITY WITH SLIDING SHELVES • 84” HIGH
UT1224 X 84 4SSK 1 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 1 S1224 10 3/16” x 22 1/8” x 3/4”
1 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4” 4 SSK12 8 1/2” x 21 3/16” x 2”
UT1524 X 84 4SSK 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 1 S1524 13 3/16” x 22 1/8” x 3/4”
1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4” 4 SSK15 11 1/2” x 21 3/16” x 2”
UT1824 X 84 4SSK 1 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 1 S1824 16 3/16” x 22 1/8” x 3/4”
1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 4 SSK18 14 1/2” x 21 3/16” x 2”
UT2424 X 84 4SSK 2 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 1 S2424 22 3/16” x 22 1/8” x 3/4”
2 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4” 4 SSK24 20 1/2” x 21 3/16” x 2”
UT3024 X 84 4SSK 2 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 1 S3024 28 3/16” x 22 1/8” x 3/4”
PARTS: TALL CABINETS
SKU Qty †Part Name Part Name Dimensions Part Name Dimensions
UTILITY WITH ADJUSTABLE SHELVES • 24” DEEP X 96” HIGH
UT1524 X 96 AS 1 DR__1542 DGI-1542F 10 9/16” x 37 1/2” DGI-1542S 9 21/64” x 36 25/64”
UT1824 X 96 AS 1 DR__1842 DGI-1842F 13 9/16” x 37 1/2” DGI-1842S 12 21/64” x 36 25/64”
UT2424 X 96 AS 2 DR__1242 DGI-1242F 7 9/16” x 37 1/2” DGI-1242S 6 21/64” x 36 25/64”
UT3024 X 96 AS 2 DR__1542 DGI-1542F 10 9/16” x 37 1/2” DGI-1542S 9 21/64” x 36 25/64”
UT3624 X 96 AS 2 DR__1842 DGI-1842F 13 9/16” x 37 1/2” DGI-1842S 12 21/64” x 36 25/64”
UTILITY WITH SLIDING SHELVES • 84” HIGH
UT1224 X 84 4SSK 1 DR__1230 DGI-1230F 7 9/16” x 25 1/2” DGI-1230S 6 21/64” x 24 25/64”
UT1524 X 84 4SSK 1 DR__1530 DGI-1530F 10 9/16” x 25 1/2” DGI-1530S 9 21/64” x 24 25/64”
UT1824 X 84 4SSK 1 DR__1830 DGI-1830F 13 9/16” x 25 1/2” DGI-1830S 12 21/64” x 24 25/64”
UT2424 X 84 4SSK 2 DR__1230 DGI-1230F 7 9/16” x 25 1/2” DGI-1230S 6 21/64” x 24 25/64”
UT3024 X 84 4SSK 2 DR__1530 DGI-1530F 10 9/16” x 25 1/2” DGI-1530S 9 21/64” x 24 25/64”
SKU Qty †Part Name Dimensions Dimensions Qty *Part Name Dimensions
UTILITY WITH PANTRY STORAGE • 24” DEEP X 84” HIGH
UT3624 X 84 PCDS 2 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 1 S3624 34 3/16” x 22 1/8” x 3/4”
2 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 1 PCKS36 25 5/8” x 45” x 7 1/2”
2 PDSK18 12” x 45” x 4”
1 PSK36
UTILITY WITH PANTRY STORAGE • 24” DEEP X 90” HIGH
UT3624 X 90 PCDS 2 DR1836 17 9/16” x 35 1/2” 15 7/8” x 34” 2 S3624 34 3/16” x 22 1/8” x 3/4”
2 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 1 PCKS36 25 5/8” x 45” x 7 1/2”
2 PDSK18 12” x 45” x 4”
1 PSK36
UTILITY WITH PANTRY STORAGE • 24” DEEP X 96” HIGH
UT3624 X 96 PCDS 2 DR1842 17 9/16” x 41 1/2” 15 7/8” x 40” 3 S3624 34 3/16” x 22 1/8” x 3/4”
2 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 1 PCKS36 25 5/8” x 45” x 7 1/2”
2 PDSK18 12” x 45” x 4”
1 PSK36
PARTS: TALL CABINETS
SKU Qty †Part Name Part Name Dimensions Part Name Dimensions
UTILITY WITH PANTRY STORAGE • 24” DEEP X 84” HIGH
UT3624 X 84 PCDS 2 DR__1830 DGI-1830F 13 9/16” x 25 1/2” DGI-1830S 12 21/64” x 24 25/64”
UTILITY WITH PANTRY STORAGE • 24” DEEP X 90” HIGH
UT3624 X 90 PCDS 2 DR__1836 DGI-1836F 13 9/16” x 31 1/2” DGI-1836S 12 21/64” x 30 25/64”
UTILITY WITH PANTRY STORAGE • 24” DEEP X 96” HIGH
UT3624 X 96 PCDS 2 DR__1842 DGI-1842F 13 9/16” x 37 1/2” DGI-1842S 12 21/64” x 36 25/64”
† Mullion Frame or Open Frame Cathedral door styles must be ordered hinged left or right Shenandoah Value Series™ Parts Directory
216 PARTS DIRECTORY: Double Oven Cabinets
DOOR ADJUSTABLE SHELF
Full Overlay Standard Overlay
SKU Qty †Part Name Dimensions *Part Name Dimensions Qty *Part Name Dimensions
DOUBLE OVEN CABINETS • 84” HIGH
OVD2784 2 DR1318 13 1/16” x 17 1/2” DR1218 9 7/8” x 16” N/A
OVD3084 2 DR1518 14 9/16” x 17 1/2” DR1318 11 3/8” x 16” N/A
OVD3384 2 DR1618 16 1/16” x 17 1/2” DR1518 12 7/8” x 16” N/A
DOUBLE OVEN CABINETS • 90” HIGH
OVD2790 AS 2 DR1324 13 1/16” x 23 7/8” DR1224 9 7/8” x 22 3/8” 1 S2724 25 3/16” x 22 1/8” x 3/4”
OVD3090 AS 2 DR1524 14 9/16” x 23 7/8” DR1324 11 3/8” x 22 3/8” 1 S3024 28 3/16” x 22 1/8” x 3/4”
OVD3390 AS 2 DR1624 16 1/16” x 23 7/8” DR1524 12 7/8” x 22 3/8” 1 S3324 31 3/16” x 22 1/8” x 3/4”
DOUBLE OVEN CABINETS • 96” HIGH
OVD2796 AS 2 DR1330 13 1/16” x 29 1/2” DR1230 9 7/8” x 28” 2 S2724 25 3/16” x 22 1/8” x 3/4”
OVD3096 AS 2 DR1530 14 9/16” x 29 1/2” DR1330 11 3/8” x 28” 2 S3024 28 3/16” x 22 1/8” x 3/4”
OVD3396 AS 2 DR1630 16 1/16” x 29 1/2” DR1530 12 7/8” x 28” 2 S3324 31 3/16” x 22 1/8” x 3/4”
PARTS: TALL CABINETS
SKU Qty Part Name Dimensions Part Name Dimensions Part Name Dimensions
DOUBLE OVEN CABINETS • 84” HIGH
OVD2784 1 DDFOV27 26 9/16” x 7 7/16” DDF24 21 7/8” x 5 1/8” DRB24 X 18DP SG 19 23/32” x 3 5/8” x 18 1/2”
OVD3084 1 DDFOV30 29 9/16” x 7 7/16” DDF27 24 7/8” x 5 1/8” DRB27 X 18DP SG 22 23/32” x 3 5/8” x 18 1/2”
OVD3384 1 DDFOV33 32 9/16” x 7 7/16” DDF30 27 7/8” x 5 1/8” DRB30 X 18DP SG 25 23/32” x 3 5/8” x 18 1/2”
DOUBLE OVEN CABINETS • 90” HIGH
OVD2790 AS 1 DDFOV27 26 9/16” x 7 7/16” DDF24 21 7/8” x 5 1/8” DRB24 X 18DP SG 19 23/32” x 3 5/8” x 18 1/2”
OVD3090 AS 1 DDFOV30 29 9/16” x 7 7/16” DDF27 24 7/8” x 5 1/8” DRB27 X 18DP SG 22 23/32” x 3 5/8” x 18 1/2”
OVD3390 AS 1 DDFOV33 32 9/16” x 7 7/16” DDF30 27 7/8” x 5 1/8” DRB30 X 18DP SG 25 23/32” x 3 5/8” x 18 1/2”
DOUBLE OVEN CABINETS • 96” HIGH
OVD2796 AS 1 DDFOV27 26 9/16” x 7 7/16” DDF24 21 7/8” x 5 1/8” DRB24 X 18DP SG 19 23/32” x 3 5/8” x 18 1/2”
OVD3096 AS 1 DDFOV30 29 9/16” x 7 7/16” DDF27 24 7/8” x 5 1/8” DRB27 X 18DP SG 22 23/32” x 3 5/8” x 18 1/2”
OVD3396 AS 1 DDFOV33 32 9/16” x 7 7/16” DDF30 27 7/8” x 5 1/8” DRB30 X 18DP SG 25 23/32” x 3 5/8” x 18 1/2”
SKU Qty †Part Name Dimensions *Part Name Dimensions Qty *Part Name Dimensions
SINGLE OVEN CABINETS • 84” HIGH
OVS2784 2 DR1318 13 1/16” x 17 1/2” DR1218 9 7/8” x 16” N/A
2 DR1324 13 1/16” x 23 7/8” DR1224 9 7/8” x 22 3/8”
OVS3084 2 DR1518 14 9/16” x 17 1/2” DR1318 11 3/8” x 16” N/A
2 DR1524 14 9/16” x 23 7/8” DR1324 11 3/8” x 22 3/8”
OVS3384 2 DR1618 16 1/16” x 17 1/2” DR1518 12 7/8” x 16” N/A
2 DR1624 16 1/16” x 23 7/8” DR1524 12 7/8” x 22 3/8”
SINGLE OVEN CABINETS • 90” HIGH
OVS2790 AS 4 DR1324 13 1/16” x 23 7/8” DR1224 9 7/8” x 22 3/8” 1 S2724 25 3/16” x 22 1/8” x 3/4”
OVS3090 AS 4 DR1524 14 9/16” x 23 7/8” DR1324 11 3/8” x 22 3/8” 1 S3024 28 3/16” x 22 1/8” x 3/4”
OVS3390 AS 4 DR1624 16 1/16” x 23 7/8” DR1524 12 7/8” x 22 3/8” 1 S3324 31 3/16” x 22 1/8” x 3/4”
SINGLE OVEN CABINETS • 96” HIGH
OVS2796 AS 2 DR1330 13 1/16” x 29 1/2” DR1230 9 7/8” x 28” 2 S2724 25 3/16” x 22 1/8” x 3/4”
2 DR1324 13 1/16” x 23 7/8” DR1224 9 7/8” x 22 3/8”
OVS3096 AS 2 DR1530 14 9/16” x 29 1/2” DR1330 11 3/8” x 28” 2 S3024 28 3/16” x 22 1/8” x 3/4”
2 DR1524 14 9/16” x 23 7/8” DR1324 11 3/8” x 22 3/8”
OVS3396 AS 2 DR1630 16 1/16” x 29 1/2” DR1530 12 7/8” x 28” 2 S3324 31 3/16” x 22 1/8” x 3/4”
2 DR1624 16 1/16” x 23 7/8” DR1524 12 7/8” x 22 3/8”
SINGLE OVEN CABINETS WITH ORGANIZER • 84” HIGH
OVS2784 BPPO 2 DR1318 13 1/16” x 17 1/2” DR1218 9 7/8” x 16” N/A
2 DR1324 13 1/16” x 23 7/8” DR1224 9 7/8” x 22 3/8” BBPOK24
PARTS: TALL CABINETS
SKU Qty Part Name Dimensions Part Name Dimensions Part Name Dimensions
STANDARD HEIGHT VANITY DRAWER BASE • 31 1/8” HIGH
VDB12 2 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8” DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
1 DDF12VD 11 9/16” x 13 3/8” DDF12D 9 7/8” x 10 13/16” DRB12M X 18DP SG 7 23/32” x 7 3/4” x 18 1/2”
VDB15 2 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 X 18DP SG 10 23/32” x 3 5/8” x 18 1/2”
1 DDF15VD 14 9/16” x 13 3/8” DDF15D 12 7/8” x 10 13/16” DRB15M X 18DP SG 10 23/32” x 7 3/4” x 18 1/2”
VDB18 2 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” DRB18 X 18DP SG 13 23/32” x 3 5/8” x 18 1/2”
1 DDF18VD 17 9/16” x 13 3/8” DDF18D 15 7/8” x 10 13/16” DRB18M X 18DP SG 13 23/32” x 7 3/4” x 18 1/2”
VDB21 2 DDF21 20 9/16” x 5 13/16” DDF21 18 7/8” x 5 1/8” DRB21 X 18DP SG 16 23/32” x 3 5/8” x 18 1/2”
1 DDF21VD 20 9/16” x 13 3/8” DDF21D 18 7/8” x 10 13/16” DRB21M X 18DP SG 16 23/32” x 7 3/4” x 18 1/2”
VDB24 2 DDF24 23 9/16” x 5 13/16” DDF24 21 7/8” x 5 1/8” DRB24 X 18DP SG 19 23/32” x 3 5/8” x 18 1/2”
1 DDF24VD 23 9/16” x 13 3/8” DDF24D 21 7/8” x 10 13/16” DRB24M X 18DP SG 19 23/32” x 7 3/4” x 18 1/2”
BASE HEIGHT VANITY DRAWER BASE • 34 1/2” HIGH
VDB1234H 1 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8” DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
2 DDF12M 11 9/16” x 11 27/32” DDF12D 9 7/8” x 10 13/16” DRB12M X 18DP SG 7 23/32” x 7 3/4” x 18 1/2”
VDB1534H 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 X 18DP SG 10 23/32” x 3 5/8” x 18 1/2”
2 DDF15M 14 9/16” x 11 27/32” DDF15D 12 7/8” x 10 13/16” DRB15M X 18DP SG 10 23/32” x 7 3/4” x 18 1/2”
VDB1834H 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” DRB18 X 18DP SG 13 23/32” x 3 5/8” x 18 1/2”
2 DDF18M 17 9/16” x 11 27/32” DDF18D 15 7/8” x 10 13/16” DRB18M X 18DP SG 13 23/32” x 7 3/4” x 18 1/2”
VDB2134H 1 DDF21 20 9/16” x 5 13/16” DDF21 18 7/8” x 5 1/8” DRB21 X 18DP SG 16 23/32” x 3 5/8” x 18 1/2”
2 DDF21M 20 9/16” x 11 22/32” DDF21D 18 7/8” x 10 13/16” DRB241 X 18DP SG 16 23/32” x 7 3/4” x 18 1/2”
VDB2434H 1 DDF24 23 9/16” x 5 13/16” DDF24 21 7/8” x 5 1/8” DRB24 X 18DP SG 19 23/32” x 3 5/8” x 18 1/2”
SKU Qty Part Name Dimensions Dimensions Qty Part Name Dimensions
VANITY BASE • 31 1/8” HIGH
VB12 1 DR1218V 11 9/16” x 20” 9 7/8” x 17 7/8” 1 DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
VB15 1 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 1 DRB15 X 18DP SG 10 23/32” x 3 5/8” x 18 1/2”
VB18 1 DR1818V 17 9/16” x 20” 15 7/8” x 17 7/8” 1 DRB18 X 18DP SG 13 23/32” x 3 5/8” x 18 1/2”
VB21 1 DR2118V 20 9/16” x 20” 18 7/8” x 17 7/8” 1 DRB21 X 18DP SG 16 23/32” x 3 5/8” x 18 1/2”
VB24 2 DR1218V 11 9/16” x 20” 9 7/8” x 17 7/8” 1 DRB24 X 18DP SG 19 23/32” x 3 5/8” x 18 1/2”
VB27 2 DR1318V 13 1/16” x 20” 11 3/8” x 17 7/8” 1 DRB27 X 18DP SG 22 23/32” x 3 5/8” x 18 1/2”
VB30 2 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 1 DRB30 X 18DP SG 25 23/32” x 3 5/8” x 18 1/2”
VB33 2 DR1618V 16 1/16” x 20” 14 3/8” x 17 7/8” 1 DRB33 X 18DP SG 28 23/32” x 3 5/8” x 18 1/2”
VB36 2 DR1818V 17 9/16” x 20” 15 7/8” x 17 7/8” 1 DRB36 X 18DP SG 31 23/32” x 3 5/8” x 18 1/2”
VANITY SINK BASE WITH TOP DRAWERS • 31 1/8” HIGH
VAN36 2 DR1818V 17 9/16” x 20” 15 7/8” x 17 7/8” 2 DRB10 X 18DP SG 6 7/32” x 3 5/8” x 18 1/2”
VAN42 2 DR2118V 20 9/16” x 20” 18 7/8” x 17 7/8” 2 DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
VAN48 2 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 2 DRB15 X 18DP SG 10 23/32” x 3 5/8” x 18 1/2”
1 DR1818V 17 9/16” x 20” 15 7/8” x 17 7/8”
VAN54 2 DR1218V 11 9/16” x 20” 9 7/8” x 17 7/8” 2 DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
2 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8”
VAN60 4 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 2 DRB15 X 18DP SG 10 23/32” x 3 5/8” x 18 1/2”
VANITY COMBO SINK BASE • 18” DEEP X 31 1/8” HIGH
VSDB2418 1 DR1218V 11 9/16” x 20” 9 7/8” x 17 7/8” 1 DRB12 X 15DP SG 7 23/32” x 3 5/8” x 15 1/2”
1 DRB12M X 15DP SG 7 23/32” x 7 3/4” x 15 1/2”
VSDB2718 1 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 1 DRB12 X 15DP SG 7 23/32” x 3 5/8” x 15 1/2”
1 DRB12M X 15DP SG 7 23/32” x 7 3/4” x 15 1/2”
VSDB3018 1 DR1818V 17 9/16” x 20” 15 7/8” x 17 7/8” 1 DRB12 X 15DP SG 7 23/32” x 3 5/8” x 15 1/2”
1 DRB12M X 15DP SG 7 23/32” x 7 3/4” x 15 1/2”
PARTS: VANITY CABINETS
VSDB3318 1 DR2118V 20 9/16” x 20” 18 7/8” x 17 7/8” 1 DRB12 X 15DP SG 7 23/32” x 3 5/8” x 15 1/2”
1 DRB12M X 15DP SG 7 23/32” x 7 3/4” x 15 1/2”
VSDB3618 1 DR2118V 20 9/16” x 20” 18 7/8” x 17 7/8” 1 DRB15 X 15DP SG 10 23/32” x 3 5/8” x 15 1/2”
1 DRB15M X 15DP SG 10 23/32” x 7 3/4” x 15 1/2”
PARTS DIRECTORY: Vanity Cabinets 221
DRAWER / PANEL FRONT
Full Overlay Standard Overlay
SKU Qty Part Name Dimensions Dimensions Qty Part Name Dimensions
VANITY COMBO SINK BASE • 31 1/8” HIGH
VSDB24 1 DR1218V 11 9/16” x 20” 9 7/8” x 17 7/8” 1 DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
1 DRB12M X 18DP SG 7 23/32” x 7 3/4” x 18 1/2”
VSDB27 1 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 1 DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
1 DRB12M X 18DP SG 7 23/32” x 7 3/4” x 18 1/2”
VSDB30 1 DR1818V 17 9/16” x 20” 15 7/8” x 17 7/8” 1 DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
1 DRB12M X 18DP SG 7 23/32” x 7 3/4” x 18 1/2”
VSDB33 1 DR2118V 20 9/16” x 20” 18 7/8” x 17 7/8” 1 DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
1 DRB12M X 18DP SG 7 23/32” x 7 3/4” x 18 1/2”
VSDB36 1 DR2118V 20 9/16” x 20” 18 7/8” x 17 7/8” 1 DRB15 X 18DP SG 10 23/32” x 3 5/8” x 18 1/2”
1 DRB15M X 18DP SG 10 23/32” x 7 3/4” x 18 1/2”
VSDB42 2 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 2 DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
1 DRB12M X 18DP SG 7 23/32” x 7 3/4” x 18 1/2”
VSDB48D 2 DR1218V 11 9/16” x 20” 9 7/8” x 17 7/8” 4 DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
2 DRB12M X 18DP SG 7 23/32” x 7 3/4” x 18 1/2”
VSDB54D 2 DR1218V 11 9/16” x 20” 9 7/8” x 17 7/8” 4 DRB15 X 18DP SG 10 23/32” x 3 5/8” x 18 1/2”
2 DRB15M X 18DP SG 10 23/32” x 7 3/4” x 18 1/2”
VSDB60C 4 DR1218V 11 9/16” x 20” 9 7/8” x 17 7/8” 2 DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
1 DRB12M X 18DP SG 7 23/32” x 7 3/4” x 18 1/2”
VSDB60D 2 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 4 DRB15 X 18DP SG 10 23/32” x 3 5/8” x 18 1/2”
2 DRB15M X 18DP SG 10 23/32” x 7 3/4” x 18 1/2”
PARTS: VANITY CABINETS
PARTS DIRECTORY: Vanity Cabinets 223
DRAWER / PANEL FRONT
Full Overlay Standard Overlay
SKU Qty Part Name Dimensions Dimensions Qty Part Name Dimensions
VANITY BASE • 34 1/2” HIGH
VB1234H 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
VB1534H 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DRB15 X 18DP SG 10 23/32” x 3 5/8” x 18 1/2”
VB1834H 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DRB18 X 18DP SG 13 23/32” x 3 5/8” x 18 1/2”
VB2134H 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 DRB21 X 18DP SG 16 23/32” x 3 5/8” x 18 1/2”
VB2434H 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 DRB24 X 18DP SG 19 23/32” x 3 5/8” x 18 1/2”
VB2734H 2 DR1324 13 1/16” x 23 7/8” 11 3/8” x 22 3/8” 1 DRB27 X 18DP SG 22 23/32” x 3 5/8” x 18 1/2”
VB3034H 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DRB30 X 18DP SG 25 23/32” x 3 5/8” x 18 1/2”
VB3334H 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 1 DRB33 X 18DP SG 28 23/32” x 3 5/8” x 18 1/2”
VB3634H 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DRB36 X 18DP SG 31 23/32” x 3 5/8” x 18 1/2”
VANITY BASE WITH FACTORY INSTALLED WASTEBASKET • 34 1/2” HIGH
VWBT1834H 1 DRVWBT1824 ND 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DRB18 X 18DP SG 13 23/32” x 3 5/8” x 18 1/2”
VANITY SINK BASE WITH TOP DRAWERS • 34 1/2” HIGH
VAN3634H 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DRB10 X 18DP SG 6 7/32” x 3 5/8” x 18 1/2”
VAN4234H 2 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 2 DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
VAN4834H 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DRB15 X 18DP SG 10 23/32” x 3 5/8” x 18 1/2”
1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8”
VAN5434H 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 2 DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8”
VAN6034H 4 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DRB15 X 18DP SG 10 23/32” x 3 5/8” x 18 1/2”
VANITY COMBO SINK BASE • 18” DEEP X 34 1/2” HIGH
VSDB241834H 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 2 DRB12M X 15DP SG 7 23/32” x 7 3/4” x 15 1/2”
VSDB271834H 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DRB12M X 15DP SG 7 23/32” x 7 3/4” x 15 1/2”
VSDB301834H 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DRB12M X 15DP SG 7 23/32” x 7 3/4” x 15 1/2”
PARTS: VANITY CABINETS
VSDB331834H 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 2 DRB12M X 15DP SG 7 23/32” x 7 3/4” x 15 1/2”
VSDB361834H 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 2 DRB15M X 15DP SG 10 23/32” x 7 3/4” x 15 1/2”
PARTS DIRECTORY: Vanity Cabinets 225
DRAWER / PANEL FRONT
Full Overlay Standard Overlay
SKU Qty Part Name Dimensions Dimensions Qty Part Name Dimensions
VANITY COMBO SINK BASE • 34 1/2” HIGH
VSDB2434H 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 2 DRB12M X 18DP SG 7 23/32” x 7 3/4” x 18 1/2”
VSDB2734H 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DRB12M X 18DP SG 7 23/32” x 7 3/4” x 18 1/2”
VSDB3034H 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DRB12M X 18DP SG 7 23/32” x 7 3/4” x 18 1/2”
VSDB3334H 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 2 DRB12M X 18DP SG 7 23/32” x 7 3/4” x 18 1/2”
VSDB3634H 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 2 DRB15M X 18DP SG 10 23/32” x 7 3/4” x 18 1/2”
VSDB4234H 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
2 DRB12M X 18DP SG 7 23/32” x 7 3/4” x 18 1/2”
VSDB4834HD 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 2 DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
4 DRB12M X 18DP SG 7 23/32” x 7 3/4” x 18 1/2”
VSDB5434HD 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 2 DRB15 X 18DP SG 10 23/32” x 3 5/8” x 18 1/2”
4 DRB15M X 18DP SG 10 23/32” x 7 3/4” x 18 1/2”
VSDB6034HC 4 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DRB15 X 18DP SG 10 23/32” x 3 5/8” x 18 1/2”
2 DRB15M X 18DP SG 10 23/32” x 7 3/4” x 18 1/2”
VSDB6034HD 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 2 DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
4 DRB12M X 18DP SG 7 23/32” x 7 3/4” x 18 1/2”
PARTS: VANITY CABINETS
PARTS DIRECTORY: Vanity Cabinets 227
DRAWER / PANEL FRONT
Full Overlay Standard Overlay
Q3WRA, I3W Q5, R5, P5, P1, Q1, R1 Q3WRA, I3W Q5, R5, P5, P1, Q1, R1
SKU Qty Part Name Dimensions Dimensions Part Name Dimensions Dimensions
VANITY SINK BASE • 31 1/8” HIGH
VSB15 1 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8”
VSB18 1 DR1818V 17 9/16” x 20” 15 7/8” x 17 7/8” 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8”
VSB21 / VSF21 1 DR2118V 20 9/16” x 20” 18 7/8” x 17 7/8” 1 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8”
VSB24 / VSF24 2 DR1218V 11 9/16” x 20” 9 7/8” x 17 7/8” 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”
VSB27 2 DR1318V 13 1/16” x 20” 11 3/8” x 17 7/8” 1 DDF27 26 9/16” x 5 13/16” 24 7/8” x 5 1/8”
VSB30 / VSF30 2 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”
VSB33 2 DR1618V 16 1/16” x 20” 14 3/8” x 17 7/8” 1 DDF33 32 9/16” x 5 13/16” 30 7/8” x 5 1/8”
VSB36 / VSF36 2 DR1818V 17 9/16” x 20” 15 7/8” x 17 7/8” 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8”
VSB42 / VSF42 2 DR2118V 20 9/16” x 20” 18 7/8” x 17 7/8” 2 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8”
VSB48 / VSF48 2 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 2 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8”
1 DR1818V 17 9/16” x 20” 15 7/8” x 17 7/8” 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8”
VSB54 4 DR1318V 13 1/16” x 20” 11 3/8” x 17 7/8” 2 DDF27 26 9/16” x 5 13/16” 24 7/8” x 5 1/8”
VSB60 4 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 2 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”
VANITY SINK BASE • 18” DEEP X 31 1/8” HIGH
VSB2418 2 DR1218V 11 9/16” x 20” 9 7/8” x 17 7/8” 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”
VSB3018 2 DR1518V 11 9/16” x 20” 12 7/8” x 17 7/8” 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”
VSB3618 2 DR1818V 17 9/16” x 20” 15 7/8” x 17 7/8” 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8”
PARTS: VANITY CABINETS
PARTS DIRECTORY: Vanity Cabinets 229
DOOR DRAWER / PANEL FRONT
Full Overlay Standard Overlay Full Overlay Standard Overlay
Q3WRA, I3W Q5, R5, P5, P1, Q1, R1 Q3WRA, I3W Q5, R5, P5, P1, Q1, R1
SKU Qty Part Name Dimensions Dimensions Part Name Dimensions Dimensions
VANITY SINK BASE • 34 1/2” HIGH
VSB1534H 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8”
VSB1834H 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8”
VSB2134H 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8”
VSB2434H 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”
VSB2734H 2 DR1324 13 1/16” x 23 7/8” 11 3/8” x 22 3/8” 1 DDF27 26 9/16” x 5 13/16” 24 7/8” x 5 1/8”
VSB3034H 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”
VSB3334H 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 1 DDF33 32 9/16” x 5 13/16” 30 7/8” x 5 1/8”
VSB3634H 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8”
VSB4234H 2 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 2 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8”
VSB4834H 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8”
1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8”
VSB5434H 4 DR1324 13 1/16” x 23 7/8” 11 3/8” x 22 3/8” 2 DDF27 26 9/16” x 5 13/16” 24 7/8” x 5 1/8”
VSB6034H 4 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”
VANITY SINK BASE • 18” DEEP X 34 1/2” HIGH
VSB243418H 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”
VSB303418H 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”
VSB363418H 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8”
SKU Qty †Part Name Dimensions Dimensions Qty *Part Name Dimensions
VANITY LINEN CABINETS • WITH ADJUSTABLE SHELVES
VLC122184 AS 1 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 5 S1221 10 3/16” x 18 7/8” x 3/4”
1 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4”
VLC152184 AS 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 5 S1521 13 3/16” x 18 7/8” x 3/4”
1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”
VLC182184 AS 1 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 5 S1821 16 3/16” x 18 7/8” x 3/4”
1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”
VLC242184 AS 2 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 5 S2421 22 3/16” x 18 7/8” x 3/4”
2 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4”
VANITY LINEN • WITH SLIDING SHELVES
VLC122184 4SSK 1 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 1 S1221 10 3/16” x 18 7/8” x 3/4”
1 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4” 4 SSK1221 8 1/2” x 18 3/16” x 2”
VLC152184 4SSK 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 1 S1521 13 3/16” x 18 7/8” x 3/4”
1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4” 4 SSK1521 11 1/2” x 18 3/16” x 2”
VLC182184 4SSK 1 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 1 S1821 16 3/16” x 18 7/8” x 3/4”
1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 4 SSK1821 14 1/2” x 18 3/16” x 2”
VLC242184 4SSK 2 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 1 S2421 22 3/16” x 18 7/8” x 3/4”
2 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4” 4 SSK2421 20 1/2” x 18 3/16” x 2”
MEDICINE CABINET
MC1530 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” N/A
MCM1530 1 DRMCM1530 14 9/16” x 29 1/2” 12 7/8” x 28” N/A
TRI-VIEW MIRROR
TV3030 3 MIRROR TV3030 8 13/16” x 26 1/2” 8 13/16” x 26 1/2” 3 TV30 SHELF 9 8 7/8” x 3” x 1/2”
3 TV30 SHELF 18 17 9/32” x 3” x 1/2”
TV3630 3 MIRROR TV3630 10 13/16” x 26 1/2” 10 13/16” x 26 1/2” 3 TV36 SHELF 11 10 7/8” x 3” x 1/2”
3 TV36 SHELF 22 21 9/32” x 3” x 1/2”
VALET CABINET
VC2436 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” N/A
PARTS: VANITY CABINETS
SKU Qty †Part Name Part Name Dimensions Part Name Dimensions
VANITY LINEN CABINETS • WITH ADJUSTABLE SHELVES
VLC122184 AS 1 DR__1230 DGI-1230F 7 9/16” x 25 1/2” DGI-1230S 6 21/64” x 24 25/64”
VLC152184 AS 1 DR__1530 DGI-1530F 10 9/16” x 25 1/2” DGI-1530S 9 21/64” x 24 25/64”
VLC182184 AS 1 DR__1830 DGI-1830F 13 9/16” x 25 1/2” DGI-1830S 12 21/64” x 24 25/64”
VLC242184 AS 2 DR__1230 DGI-1230F 7 9/16” x 25 1/2” DGI-1230S 6 21/64” x 24 25/64”
VANITY LINEN • WITH SLIDING SHELVES
VLC122184 4SSK 1 DR__1230 DGI-1230F 7 9/16” x 25 1/2” DGI-1230S 6 21/64” x 24 25/64”
VLC152184 4SSK 1 DR__1530 DGI-1530F 10 9/16” x 25 1/2” DGI-1530S 9 21/64” x 24 25/64”
VLC182184 4SSK 1 DR__1830 DGI-1830F 13 9/16” x 25 1/2” DGI-1830S 12 21/64” x 24 25/64”
VLC242184 4SSK 2 DR__1230 DGI-1230F 7 9/16” x 25 1/2” DGI-1230S 6 21/64” x 24 25/64”
MEDICINE CABINET
MC1530 N/A N/A N/A
MCM1530 N/A N/A N/A
TRI-VIEW MIRROR
TV3030 N/A N/A N/A
TV3630 N/A N/A N/A
VALET CABINET
VC2436 N/A N/A N/A
† Mullion Frame or Open Frame Cathedral door styles must be ordered hinged left or right Shenandoah Value Series™ Parts Directory
232 PARTS DIRECTORY: Universal Design
DOOR ADJUSTABLE SHELF, DROT AND/OR ACCESSORY
Full Overlay Standard Overlay
SKU Qty †Part Name Dimensions Dimensions Qty *Part Name Dimensions
UNIVERSAL DESIGN BASE
B24 1B UD 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 24’’ SHELF 3/4 22 1/4” x 10 1/4” x 3/4”
B27 UD 2 DR1324 13 1/16” x 23 7/8” 11 3/8” x 22 3/8” 1 27’’ SHELF 3/4 25 1/4” x 10 1/4” x 3/4”
B30 UD 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 30’’ SHELF 3/4 28 1/4” x 10 1/4” x 3/4”
B33 UD 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 1 33’’ SHELF 3/4 31 1/4” x 10 1/4” x 3/4”
B36 UD 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 36’’ SHELF 3/4 34 1/4” x 10 1/4” x 3/4”
B39 UD 2 DR1924 19 1/16” x 23 7/8” 17 3/8” x 22 3/8” 1 39’’ SHELF 3/4 37 1/4” x 10 1/4” x 3/4”
B42 UD 2 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 42’’ SHELF 3/4 40 1/4” x 10 1/4” x 3/4”
B45 UD 3 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 45’’ SHELF 3/4 43 1/4” x 10 1/4” x 3/4”
UNIVERSAL DESIGN BASE WITH ONE SLIDING SHELF
B12 SS1 UD 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 SSK12 8 1/2” x 21 3/16” x 2”
B15 SS1 UD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 SSK15 11 1/2” x 21 3/16” x 2”
B18 SS1 UD 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 SSK18 14 1/2” x 21 3/16” x 2”
B21 SS1 UD 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 SSK21 17 1/2” x 21 3/16” x 2”
B24 1B SS1 UD 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 SSK24 20 1/2” x 21 3/16” x 2”
UNIVERSAL DESIGN BASE WITH TWO SLIDING SHELVES
B12 SS2 UD 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 2 SSK12 8 1/2” x 21 3/16” x 2”
B15 SS2 UD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 SSK15 11 1/2” x 21 3/16” x 2”
B18 SS2 UD 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 SSK18 14 1/2” x 21 3/16” x 2”
B21 SS2 UD 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 2 SSK21 17 1/2” x 21 3/16” x 2”
B24 1B SS2 UD 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 2 SSK24 20 1/2” x 21 3/16” x 2”
UNIVERSAL DESIGN CORNER BASE SUSAN
CBS36 UD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 CBS36 SHELF RAS
UNIVERSAL DESIGN SINK BASE
SB30 UD 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” N/A
SB33 UD 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” N/A
SB36 UD 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” N/A
PARTS: UNIVERSAL DESIGN
PARTS DIRECTORY: Universal Design 233
DRAWER FRONT DRAWER BODY
Full Overlay Standard Overlay
SKU Qty Part Name Dimensions Part Name Dimensions Part Name Dimensions
UNIVERSAL DESIGN BASE MULTI-USE
BMU30 UD 1 DDF30 29 9/16” x 5 13/16” DDF30 27 7/8” x 5 1/8” DRB30 X 18DP SG 25 23/32” x 3 5/8” x 18 1/2”
UNIVERSAL DESIGN DRAWER BASE
DB12 UD 2 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8” DRB12 X 18DP SG 7 23/32” x 3 5/8” x 18 1/2”
1 DDF12M 11 9/16” x 11 27/32” DDF12D 9 7/8” x 10 13/16” DRB12M X 18DP SG 7 23/32” x 7 3/4” x 18 1/2”
DB15 UD 2 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 X 18DP SG 10 23/32” x 3 5/8” x 18 1/2”
1 DDF15M 14 9/16” x 11 27/32” DDF15D 12 7/8” x 10 13/16” DRB15M X 18DP SG 10 23/32” x 7 3/4” x 18 1/2”
DB18 UD 2 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” DRB18 X 18DP SG 13 23/32” x 3 5/8” x 18 1/2”
1 DDF18M 17 9/16” x 11 27/32” DDF18D 15 7/8” x 10 13/16” DRB18M X 18DP SG 13 23/32” x 7 3/4” x 18 1/2”
DB21 UD 2 DDF21 20 9/16” x 5 13/16” DDF21 18 7/8” x 5 1/8” DRB21 X 18DP SG 16 23/32” x 3 5/8” x 18 1/2”
1 DDF21M 20 9/16” x 11 27/32” DDF21D 18 7/8” x 10 13/16” DRB21M X 18DP SG 16 23/32” x 7 3/4” x 18 1/2”
DB24 UD 2 DDF24 23 9/16” x 5 13/16” DDF24 21 7/8” x 5 1/8” DRB24 X 18DP SG 19 23/32” x 3 5/8” x 18 1/2”
1 DDF24M 23 9/16” x 11 27/32” DDF24D 21 7/8” x 10 13/16” DRB24M X 18DP SG 19 23/32” x 7 3/4” x 18 1/2”
UNIVERSAL DESIGN BASE PLUMBING SKIRT
BPS30 UD 1 DDFKDC33/27 26 9/16” x 4 7/16” DDFKDC33/27 24 7/8” x 3 3/4” N/A
BPS36 UD 1 DDFKDC36/33 32 9/16” x 4 7/16” DDFKDC36/33 30 7/8” x 3 3/4” N/A
UNIVERSAL DESIGN VANITY PLUMBING SKIRT
VPS30 UD 1 DDFKDC33/27 26 9/16” x 4 7/16” DDFKDC33/27 24 7/8” x 3 3/4” N/A
VPS36 UD 1 DDFKDC36/33 32 9/16” x 4 7/16” DDFKDC36/33 30 7/8” x 3 3/4” N/A
PARTS DIRECTORY: Accessories 235
MISCELLANEOUS PARTS & ACCESSORIES
TRACKS/CHANNELS FOR 21” DEEP VANITY, TILT-OUT TRAY KITS (FIELD INSTALLED)
21” DEEP DESK OR VANITY LINEN
Part Name Description
Part Name Description
STO/TO TRAY 11 Order (1) for SB18 - Order (2) for SB33, SB33 1B, SB36 or SB36 1B
CHANNEL V L Left channel for 21” deep Vanity/Desk
STO/TO TRAY 14 Order (1) for SB21, SB24, SB24 1B, SB27 or CSF42
CHANNEL V R Right channel for 21” deep Vanity/Desk
Order (2) for SB39, SB42, or SB48
TRACK V L Left track for 21” deep Vanity/Desk
STO/TO TRAY 22 Order (1) for SB30, SB30 1B
TRACK V R Right track for 21” deep Vanity/Desk
PARTS: ACCESSORIES
BS18 SHELF 1PK Single Shelf for BSPLY18 MIRROR TV3030 Mirror for TV3030
BS18 SHELF 4PK 4 Pack Shelf Kit for BSPLY18 MIRROR TV3630 Mirror for TV3630
BS24 SHELF 1PK Single Shelf for BSPLY24 PK36 Pilaster kit for PSK36 Shelf & Pilaster Kit
BS24 SHELF 4PK 4 Pack Shelf Kit for BSPLY24 PULL TRIVIEW Chrome pull for TV3030/TV3630 Tri-View Mirror
BS30 SHELF 1PK Single Shelf for BSPLY30 ROT DIVIDER KIT Divider for ROTDK12/ROTDK15
BS30 SHELF 4PK 4 Pack Shelf Kit for BSPLY30 ROT PROTECTOR End plastic protector on Sliding Shelves
BS36 SHELF 1PK Single Shelf for BSPLY36 TRAY ST TILT OUT 11 Stainless Tray ONLY for Factory Installed Tilt-Out
BS36 SHELF 4PK 4 Pack Shelf Kit for BSPLY36 TRAY ST TILT OUT 14 Stainless Tray ONLY for Factory Installed Tilt-Out
S369 Shelf for PSK36 Shelf & Pilaster Kit TRAY ST TILT OUT 24 Stainless Tray ONLY for Factory Installed Tilt-Out
WCMSC2412 SHELF Microwave shelf for WCMSC241236 TRAY TILT OUT 11 Plastic Tray ONLY for Factory Installed Tilt-Out
WCMSC2712 SHELF Microwave shelf for WCMSC271236 TRAY TILT OUT 14 Plastic Tray ONLY for Factory Installed Tilt-Out
WMSC2712 SHELF Microwave shelf for WMSC271236 TRAY TILT OUT 24 Plastic Tray ONLY for Factory Installed Tilt-Out
WMSC2718 SHELF Microwave shelf for WMSC271836 VWBT18 KIT Wastebasket kit for VWBT1834H
WMSC3012 SHELF Microwave shelf for WMSC301236 WCC DOWEL Dowel for WCC cabinet
WCC24 4PC RAIL Top and bottom dowel rails for WCC2415
WCC30 4PC RAIL Top and bottom dowel rails for WCC3015
SCREWS
Part Name Description WCC36 4PC RAIL Top and bottom dowel rails for WCC3615
PARTS: ACCESSORIES
SCREW BATTEN/DDF 1” Screw for batten strip WFP330 FRONT FILLER Filler for WFP330 Wall Filler Pull Out
SCREW CHANNEL Channel installation screw (1 per channel) WFP336 FRONT FILLER Filler for WFP336 Wall Filler Pull Out
SCREW DDF 1 1/4” Drawer front installation screw WFP342 FRONT FILLER Filler for WFP342 Wall Filler Pull Out
SCREW DDF SDC 7/8” SDC drawer front installation screw (1 per drawer body) WOOD SPIN HOLE PLUG Access hole plug for wood spin shelf on CBS and CWS cabinets
SCREW EXTENDER RD Screw for RD extender (1 per extender) WTH DOOR STAY Door Stay for Wall Top Hinge cabinet (2 needed)
SCREW HINGE/DR Hinge-to-door screw (2 per door) WTH DR STAY BRK Door Bracket for WTH DOOR STAY (2 needed)
SCREW HINGE/FR Hinge-to-frame screw (1 per hinge) WTH FR STAY BRK Frame bracket for WTH DOOR STAY (2 needed)
SCREW TRACK Track screw (3 per track) WTH HEX KEY BAG Hex Key for WTH DOOR STAY (1 needed)
237
Index
INDEX
238 INDEX: A–B
SKU Spec
A
Acanthus Capital ASC 168
Acanthus Insert Molding ASI8 160
Acanthus Leaf Onlay ALO 169
Acanthus Onlay ASPO 168
Accent Turned Leg ATL 170
Adjustable Shelf S__ 120, 136
Adjustable Shelf Kit SK__ 120, 136
Afton Glass Decorative Insert OFD AFTON 34
Alcove Leaded Glass Decorative Insert OFD ALCOVE 34
Angle Crown Molding ACM8 156
Angled Outside Corner Molding AOSC8 161
Appliance Garage AG/AGS 65
Applique Valance V__AP 164
Arched Valance V__AR 164
Aster Decorative Block FB/BB ASTER 150
Asymmetrical Base Easy Reach BER3336/BER3633 93
Asymmetrical Base Super Susan Plastic Spin BSS3336/BSS3633 95
Asymmetrical Base Super Susan Wood Spin BSS3336 WD/BSS3633 WD 94
B
INDEX
SKU Spec
B
Base Super Susan Plastic Spin BSS33/BSS36 94
Base Super Susan Plastic Spin, Asymmetrical BSS3336/BSS3633 95
Base Super Susan Wood Spin BSS33 WD/BSS36 WD 94
Base Super Susan Wood Spin, Asymmetrical BSS3336 WD/BSS3633 WD 94
Base Tapered Leg BTPL 171
Base Toe Kick BTK8/BTK8 UD 145
Base Tray Divider Pull Out BTDP9 79
Base Turned Leg BTL 170
Base Wine Rack Cabinet BWRC6 97
Batten Molding BM8 WD 163
BEA12 Cabinet Decorator Matching Doors DMDBEA12 146
Blind Corner Base BLB__ 90
Blind Corner Base Dimensions Chart - 91
Blind Corner Base Installation Chart - 91
Blind Corner Closure BLC1515 144
Blind Peninsula Corner Base PBC24__ 92
Blind Peninsula Corner Base Installation Chart - 92
Blind Peninsula Wall Cabinet BLPW24__ 56
Blind Peninsula Wall Cabinet Installation Chart - 57
Blind Wall Cabinet BLW__ 52
INDEX
Blind Wall Cabinet Dimensions Chart - 55
Blind Wall Cabinet Installation Chart - 54
Bookshelves BSPLY__ 97,106
C
Cabinet Angle Molding CAM8 163
Cabinet Care - 14
Cabinet Dimensions - 19
Cabinet Front Only Option CFO 28
Cabinet Specifications - 13
Cabinet Tray Divider TD3 99, 120
Ceiling Height Requirements - 22
Center Beaded Insert Molding CBE8 159
Chair Rail Molding CR8 162
Classic Crown Molding CCM8 WD 157
Clear Glass Decorative Insert __FD CLEAR 34
Column Fillers __C 151
Construction Options - 25
Construction Options Examples - 27
Construction Options Legend - 26
Contents - 3
Contents, Parts Directory - 184
Corner Appliance Garage AG2418/AG2718 65
Corner Base Carousel CAR36/CAR36 WD 96
Corner Base, Plastic Spin CBS36 95
Corner Base, Wood Spin CBS36 WD 95
Corner Lazy Susan CLS45F 99
Corner Sink Base CSB36 96
Corner Sink Front CSF36/CSF42 96
Corner Wall CW24__ 58
Corner Wall with Tambour CWT2448 60
Corner Wall with Tambour, Plastic Spin CWTS2448 61
Corner Wall with Tambour, Wood Spin CWTS2448 WD 60
Corner Wall, Plastic Spin CWS2430 60
Shenandoah Value Series™ Specification Guide
240 INDEX: C–F
SKU Spec
C
Corner Wall, Wood Spin CWS24__ WD 59
Counter Support CS12 169
Countertop Edge Molding CTM8 WD 158
Countertop Edge Molding, Decorative DCTM8 WD 158
Cover Cap COVER CAP __ 174
Crown Molding CM8 WD 157
Crown Valance V__CR 164
D
Decorative Blocks FB/BB 150
Decorative Hardware KNOBS/PULLS 177
Decorative Inside Corner Molding ICM8 161
Decorative Small Cove Molding DSCVM8 156
Decorative Large Cove Molding DLCVM8 156
Decorator Door Clips CLIP DGI BAG__ 36
Decorator Matching Doors DMD__ 146
Deep Sink Base Cabinet DSB__ 85
Deep Wood Tall End Panel DWTEP__ 144
Dentil Molding DM8 WD 159
Derbyshire Seeded Glass Decorative Insert __FD DERBYSHIRE 34
INDEX
E
Egg and Dart Molding EDM8 160
End Panels __EP 142
Environmentally Responsible Stewardship - 12
Extra Large Crown Molding XLCM8 WD
F
Fern Glass Decorative Insert __FD FERN 35
File Drawer Base Cabinet, 21” Deep FDB1821 104
File Drawer Base Cabinet, 24” Deep FDB1824 105
Filler Extension, Fluted Beaded Reversible FBF E3/FBF E342 150
Filler Extension, Universal UF E3/UF E342 148
Filler Overlay __OF 149
Filler, Base Column B__C 151
Filler, Base Corner BCF27 149
Filler, Fluted Beaded Reversible 3” FBF3 150
Filler, Fluted Beaded Reversible 6” FBF6 150
Filler, Tall Column T__C 151
INDEX: F–L 241
SKU Spec
F
Filler, Universal UF__ 144
Filler, Wall Column W__C 151
Fincastle Glass Decorative Insert OFD FINCASTLE 34
Finished Paneling FP__ 143
Finished Shelf FS__12 145
Finished Solid Stock FSS__ 160
Finishing Systems Specifications - 14
French Carved Leg FCL 170
Frosted Glass Decorative Insert __FD FROSTED 36
Full Turned Post Beaded POST234B 171
Full Turned Post Fluted POST234F 171
G
Glass Insert Sizes and Nomenclature DGI__ 198
Glass Shelf Kit GSK__ 69
Grape Onlay GRPO 167
Grid Glass Decorative Insert __FD GRID 36
Grooved End Panels ___ GROOVED 143
INDEX
Hardware Specifications - 18
Hardware, Decorative KNOB/PULL 177
Hardwood Cleat HWC ¾ X ¾ X 96 174
Heat Shield Kit HSK 100, 122
Hinges - 18
I
Increased Depth Cabinet Option ID 30
Inset Light Rail Molding ILR8 158
Inside Corner Molding QM8 WD 161
Installation Guidelines - 22
Installation Items SCREWS/CAPS/STAIN 174
Inverted Frame Cabinet Option IF 28
Ivy Insert Molding IVI8 159
K
KCMA Certification - 12
Keswick Glass Decorative Insert OFD KESWICK 35
Keyboard Tray KBT30 108
Kneehole Drawer Cabinet KDC__ 106, 133
L
Large Acanthus Corbel AC313 168
Large Cove Corbel CC212 169
Large Cove Molding LCVM8 157
Large Crown Molding LCM8 WD 157
Large Grape Corbel GC313 167
Large Grape Ornament LGO 167
Large Rope Molding LRM8 159
Large Rosette Corbel RC313 169
Large Shell Ornament LSO 166
Legs, Decorative __L 170
Library Molding LBM8 159
Light Rail Molding LR8/LR8 WD 158
Shenandoah Value Series™ Specification Guide
242 INDEX: M–R
SKU Spec
M
Matching Interior Cabinet Option MI 32
Medicine Cabinet MC/MCM 133
Meredith Glass Decorative Insert OFD MEREDITH 34
Microwave Base Cabinets BMC__ 98
Microwave Cabinet WMC 48
Microwave Wall Cabinets WCMSC/WMSC/WMC 47
Mirror Molding MM6 158
Molding Stacks MS__ 154
Moldings __8/__6 156
Mullion Frame Door Option MFD 32
O
Oasis Glass Decorative Insert OFD OASIS 35
Ogee Molding OGE8 160
Ogee Pilaster Molding OGP8 162
Open Frame Door Option OFD 32
Outside Corner Molding OCM8 161
Oven Cabinet, Base Universal BOCU__ 98
Oven Cabinet, Double OVD__ 117
Oven Cabinet, Single OVS__ 115
INDEX
P
Pantry Door Shelf Kit PDSK18 119
Pantry Swing Out Kit PCSK36 119
Parts Directory Section - 181
Peninsula Base Cabinet PB__ 82
Peninsula Base Cabinet, Full-Height PB__FH 83
Peninsula Corner Wall Cabinet PWCW24__ 61
Peninsula Wall Cabinet PW__ 49
Plastic Bag Door Storage Unit PBDSU__ 99
Plinth Decorative Block FB/BB PLINTH 153
Prepped for Glass Decorative Insert __FD PREPPED 36
Putty Stick PUTTY STICK __ 175
Pyramid Decorative Block FB/BB PYRAMID 153
Q
Quarter Round Molding QR8 163
R
Raised Panel Arch Valance V__ RP 165
Range Hood Blower RHVENT__ 67
Range Hood Blower Recirculating RHVENT __R 67
Range Hood Chimney RHC__ 66
Range Hood Liner RHLINER__ 68
Range Hood Wall, Arched Valance WRH__ AV 66
Range Hood Wall, Straight Valance WRH__ SV 66
Range Hood, Arched Valance RH__24 AV 66
Range Hood, Straight Valance RH__24 SV 66
Range Hood, Tapered RH__24 T 66
Recessed Toe Kick Option RTK__ 30
Reduced Depth Cabinet Option RD 29
INDEX: R–S 243
SKU Spec
R
Refrigerator Return Panel RR__ 144
Refrigerator Wall Cabinet W__X 24 DP 44
Ribbed Glass Decorative Insert __FD RIBBED 35
Rice Paper Glass Decorative Insert __FD RICE PAPER 35
Roll Out Tray Divider Kit ROTDK__ 98
Rope Molding RM8 WD 158
Rosette Decorative Block FB/BB ROSETTE 152
S
Scalloped Valance V__SC 165
Screw Cover Caps COVER CAP __ 174
Screws, Installation SCREW INST 2.5 BX100 174
Scribe Molding SM8 WD 163
Shaker Accent Molding SAM8 WD 162
Shaker Valance V__SH 164
Shelf End Base SEB 97
Shelf End Peninsula Base SEPB 97
Shelf End Wall SEW__ 64
Shelf Kit, Adjustable SK__ 120, 136
Shelf Rests SHELF RESTS 18, 174
INDEX
Shelf Under Cabinet SUC36T 69
Shelf Under Cabinet Organizer SUCO__ 106
Shelf, Adjustable S__ 120, 136
Shelf, Finished FS__12 145
Shell Onlay SHPO 166
Side-Mounted Drawer Glides - 18
Single Bead Accent Molding SBAM8 WD 162
Single Bead Molding SBM8 161
Single Oven Cabinet OVS__ 115
Single Oven Cabinet with Base Pot and Pan Organizer OVS____BPPO 117
Sink Base Door Storage Unit SBDSU__ 99
Sink Base Multi-Storage Cabinet SBMS3_ STO 89
Sink Base Multi-Storage Kit SBMS3_ KIT 101
Sink Base Multi-Storage Shelf SBMSS 101
Sink Base with Factory Installed Tilt-Out Tray(s) SB__STO/TO 87
Sink/Range Base Cabinet SB__ 84
Sink/Range Front SF__ 86
Sink/Vanity Front Floor FL__ 138
Sink/Vanity Front Return SFR 142
Sliding Shelf 4Pack Kit USSK__-4K 121, 136
Sliding Shelf Kit SSK__ 101, 108, 121, 136
Sliding Towel Bar STB 96
Small Acanthus Corbel AC58 168
Small Cove Corbel CC29 169
Small Cove Molding SCVM8 156
Small Grape Corbel GC58 167
Small Grape Ornament SGO 167
Small Rosette Corbel RC58 169
Small Shell Ornament SSO 166
Small Single Bead Molding SSBM8 160
Soffit Crown Molding SCM8 WD 157
Spice Drawer Cabinet SDC__ 63
Spice Rack Kit SRK__ 68
Split Post SPLT POST80__ 172
Shenandoah Value Series™ Specification Guide
244 INDEX: S–U
SKU Spec
S
Stain Kits STAIN __ 175
Standard Cabinet Specifications - 11
Stem Glass Holder SGH36U 69
Storage Cube SC__ 63, 108
Straight Appliance Garage AGS24 65
Straight Trim Molding UM8 WD 162
Straight Valance V__S 165
T
Tall Acanthus Capital TASC 168
Tall Bookshelves BSPLY____ 107
Tall Cabinet Decorator Matching Doors DMDT 147
Tall Cabinet Dimensions - 20
Tall Column Filler T__C 151
Tall End Panel TEP__ 144
Tapered Leg TPL 170
Tatting Glass Decorative Insert __FD TATTING 35
Tilt-Out Tray Kit, Plastic TO TRAY __ 101
Tilt-Out Tray Kit, Stainless STO TRAY __ 101
Toe Kick BTK8 145
INDEX
U
Universal Design Base Cabinet B__ UD 138
Universal Design Base Cabinet, One Sliding Shelf B__ SS1 UD 138
Universal Design Base Cabinet, Two Sliding Shelves B__ SS2 UD 139
Universal Design Base Multi-Use Cabinet BMU30 UD 140
Universal Design Base Toe Kick BTK8 UD 145
Universal Design Cabinet Dimensions - 21
Universal Design Corner Base Susan Cabinet CBS36 UD 140
Universal Design Drawer Base Cabinet DB__ UD 140
Universal Design Plumbing Skirt _PS3_ UD 139
Universal Design Sink Base SB__ UD 139
Universal Filler UF___ 149
Universal Filler Extension UF E3/UF E342 149
Utility Cabinet Accessories S/SK/SSK/PSK/TD3 120
Utility Cabinet Shelf and Pilaster Kit PSK36 120
Utility Cabinet with Adjustable Shelves, 12” Deep UT__12 X __ AS 111
Utility Cabinet with Adjustable Shelves, 24” Deep UT__24 X __ AS 112
Utility Cabinet with Pantry Storage UT__ PCDS 114
Utility Cabinet with Sliding Shelves UT__4SSK 113
Utility Cabinet, 12” Deep UT__12 X __ 110
Utility Cabinet, 24” Deep UT__24 X __ 112
INDEX: V–W 245
SKU Spec
V
Valances V__ 164
Valet Cabinet VC2436 133
Vanity Base, 31 1/8” High VB__ 124
Vanity Base, 34 1/2” High VB__H 129
Vanity Base, Full-Height 34 1/2” High VB__H FH 129
Vanity Cabinet Decorator Matching Doors DMDV 146
Vanity Cabinet Dimensions - 20
Vanity Combo Sink Base, 31 1/8” High VSDB__ 126
Vanity Combo Sink Base, 34 1/2” High VSDB__H 132
Vanity Drawer Base, 31 1/8” High VDB__ 124
Vanity Drawer Base, 34 1/2” High VDB__H 130
Vanity Linen Cabinet VLC__ 134
Vanity Sink Base, 31 1/8” High VSB__/VAN__ 125
Vanity Sink Base, 34 1/2” High VSB__H/VAN__H 130
Vanity Sink Front, 31 1/8” High VSF__ 128
Vanity Wastebasket Cabinet, 34 ½” High VWBT1834 133
Void Door Cabinet Option VDO__ 28
W
Wall Bookshelves BSPLY__ 106
INDEX
Wall Cabinet Construction - 16
Wall Cabinet Decorator Matching Doors DMDW__ 146
Wall Cabinet Dimensions - 19
Wall Cabinets with Spice Rack W__SR 43
Wall Cabinets, Standard W__ 36
Wall China Cabinet WCC__ 64
Wall Column Filler W__C 151
Wall Easy Reach Cabinet WER24__ 61
Wall End Angle Cabinet WEA12__ 62
Wall End Panel WEP__ 143
Wall Filler Pull Out WFP__ 65
Wall Microwave Cabinet WMSC__ 47
Wall Range Hood, Arched Valance WRH__ AV 66
Wall Range Hood, Straight Valance WRH__ SV 66
Wall Top Hinge Cabinet WTH__ 46
Warranty Information - 4
Wastebasket Lid WBL35_ 96
Wastebasket Unit WBU15 96
White Overlay Filler WOF__ 149
Wide Batten Molding WBM8 163
Wine Rack WR36 69
Wine Rack Cabinet WRC__ 64
Wine Storage Cabinet WSC__ 64
Wood Base End Panel WBEP 144
Wood Species & Materials - 15
Wood Tall End Panel WTEP__ 144
INDEX
Espresso Espresso
Fairfax Canterbury ®
SPECIFICATIONS
Nutmeg Nutmeg
Devon ®
n
PARTS
White
SEPTEMBER 2014
Printed in U.S.A. ©2014 American Woodmark Corporation 0714 7.75M AWL95202 www.ShenandoahValueSeries.com For Store Use Only
©2014 LOWE’S and Gable Mansard Design are trademarks of LF, LLC. All are used with permission. Property of: