Professional Documents
Culture Documents
MSS SP 97 2012 Integrally Reinforced For PDF
MSS SP 97 2012 Integrally Reinforced For PDF
08 OCT 2012 I
(
SISTEMA DE GESnOH
SGC I SGA I SST
Nombnr y Fi",,~
t
"S -
COPIA CONTROi..ADA
Standard Practice
Developed and Approved by the
Manufacturers Standardization Society of the
Valve and FIttings Industry, Inc.
Fax: (703)281-6671
E-mail: standards@mss-hq.org
Sc*I to;l*OAIAATlON HAHDLIG SfAvas, Ol aatl'
2OIVWlII8:IU . QMT
M SS ST ANDARD P R ACTICE SP-9 7 I
I
•
This MSS Standard Practice was developed under the consensus of MSS Technical Committees 105 and the
MSS Coordinating Committee. The content of this Standard Practice is the resulting efforts of competent and
experienced volunteers to provide an effective, clear, and non-exclusive standard that will benefit the industry
as a whole. This MSS Standard Practice describes minimal requirements and is intended as a basis for common
practice by the manufacturer, the user, and the general public. The existence of an MSS Standard Practice does
not in itself preclude the manufacture, sale, or use of products not conforming to the Standard Practice.
Mandatory conformance to this Standard Practice is established only by reference in other documents such as a
code, specification, sales contract, or public law, as applicable. MSS has no power, nor does it undertake, to
enforce or certify compliance with this document. Any certification or other statement of compliance with the
requirements of this Standard Practice shaH not be attributable to MSS and is solely the responsibility of the
certifier or maker of the statement.
"Unless otherwise specifically noted in this MSS Standard Practice, other standards documents
referred to herein are identified by the date of issue that was applicable to this Standard Practice
at the date of issue of this Standard Practice (see Annex C). This Standard Practice shall remain
silent on the applicability of those other standards of prior or sllbsequent dates of issue even
though applicable provisions may not have changed. ..
By publication of this Standard Practice, no position is taken with respect to the validity of any potential
claim(s) or of any patent rights in connection therewith. MSS shaH not be held responsible for identifying any
patent rights. Users are expressly advised that determination of patent rights and the risk of infringement of
such rights are entirely their responsibility.
In this Standard Practice, all text, notes, annexes, tables, figures, and references are construed to be essential to
the understanding of the message of the standard, and are considered normative unless indicated as
"supplemental". AH appendices, if included, that appear in this document are construed as "supplemental".
Note that supplemental information does not include mandatory requirements.
The SI (metric) units and U.S. customary units in this Standard Practice are regarded separately as the standard;
each should be used independently of the other. Combining or converting values between the two systems may
o
result in nonconformance with this Standard Practice.
This Standard Practice has been substantiaHy revised from tbe previous edition. It is
suggested tbat if tbe user is interested in knowing what changes have been made, that
direct page by page comparison should be made of tbis document.
Non-toleranced dimensions in the Standard Practice are nominal, and, unless otherwise specified, shaH be
considered "for reference only".
Excerpts of this Standard Practice may be qlloted with permission. Credit lines sholiid read 'Extracted
from MSS SP-97-20J 2 with permission of the publisher, Manufacturers Standardization Society of the
Valve and Fittings Industry'. Reproduction and/or electronic transmission or dissemination is prohibited
IInder copyright convention unless written permission is granted by the Manufacturers Standardization
Society of the Valve and Fittings Industry Inc. All rights reserved.
OriginaHy Published: June 1987
Current Edition Approved: September 20 II
Current Edition Published: May 2012
MSS is a registered trademark of the Manufacturers Standardization Society of the Valve and Fittings Industry, Inc.
Copyright @, 2012 by
Manufacturers Standardization Society
of the
Valve and Fittings Industry, Inc.
Printed in U.S.A.
TABLE OF CONTENTS
SECTION PAGE
SCOPE ..................................................................................................................................................... 1
2 SERVICE DESIGNATION ..................................................................................................................... 1
3 SIZE ......................................................................................................................................................... 2
4 MARKING .............................................................................................................................................. 2
5 MATERIAL ............................................................................................................................................. 2
6 DESIGN AND DIMENSION .................................................................................................................. 3
7 TESTS ..................................................................................................................................................... 3
TABLE
Correlation of Fittings Class with Schedule Number or Wall
Designation of Run Pipe for Calculation of Ratings ............................................................................... 1
2 90° Branch Outlets - Buttwelding. U.S. Customary Units .................................................................... ..4
3 90° Branch Outlets - Threaded. U.S. Customary Units .......................................................................... 5
4 90° Branch Outlets - Socket Welding. U.S. Customary Units ................................................................ 6
5 45° Branch Outlets - Buttwelding. U.S. Customary Units ...................................................................... 7
6 45° Branch Outlets - Threaded, U.S. Customary Units .......................................................................... 8
7 45° Branch Outlets - Socket Welding. U.S. Customary Units ................................................................ 9
A2 90° Branch Outlets - Buttwelding. SI (Metric) Units ........................................................................... 10
A3 90° Branch Outlets- Threaded, SI (Metric) Units ............................................, ................................... 11
A4 90° Branch Outlets - Socket Welding. SI (Metric) Units ...................................................................... 12
A5 45° Branch Outlets - Buttwelding. SI (Metric) Units ........................................................................... \3
A6 45° Branch Outlets - Threaded, SI (Metric) Units ................................................................................ 14
A7 45° Branch Outlets- Socket Welding. SI (Metric) Units ...................................................................... 15
FIGURE
Fitting Consolidation Gap Allowance ..................................................................................................... 2
ANNEX
o
ii
. . ~NFOMIATION~ RfMCU.Ol1i211111
2\)1ZN2811:1S:S1GMT
M SS STANDA RD PRACTI CE SP- 97
INTEGRALLY REINFORCED FORGED BRANCH OUTLET FITTINGS -
SOCKET WELDING, THREADED, AND BUTTWELDING ENDS
\. SCOPE
TABLE 1
Correlation of Fittings Class with Schedule Number or
Wall of Run for Calculation of Ratings
o
4.2 The marking shall include (but it is not
limited to) the following: Specifications A234/A234M, A403/A403M,
A420/A420M, or A815IA815M; or the ASTM
a) Mflnu!flcturer's nflme or trfldemflrk. Forging Specifications AI051AI05M,
AI 821AI 82M, or A3501A350M.
b) Mflterifl/ Identijicfltion The material
shall be identified in accordance with the 5.2 All other forging, bar,' and seamless
marking requirements of the applicable tubular products listed in ASME B 16.34 Table
ASTM Specifications, including Heat I; including the applicable "notes" of ASME
Identification. B 16.34 Table I, Table 2, or Appendix VII
tables, may be used.
1/18 Max.
C_o::==I=__i2"'F.~ (1.6 mm)
o FIGURE 1
Fitting Consolidation Gap Allowance
_
(Illustrative Only)
Applicable to 90° and 45° Branches
.. '- ,', .. -..... ' .. '-" ---
.... 2
~e.,-Hl.....,~wIh.ess 8otI1O.1J#CIRUATION HAHOlHJ SSMCCS. Gllalt,
No~ot'~~ wIfIOUI ""lIIOrnlHS 2012iW2t t8:t&:18 OMT
MSS ST ANDARD PRACTICE SP-9 7
6. DESIGN AND DIMENSION 6.4 Socket Weld Socket Weld fittings shall
meet the minimum socket depth. minimum
6.1 A run pipe having a branch connection is socket wall thickness and socket diameter of
weakened by the opening made in it The ASME B 16.11 for the appropriate class.
branch connection must reinforce the opening
and restore the original strength of the run 6.5 The contour weld bevel angle on the
pipe. It is the intent of this Standard Practice longitudinal section of the fittings shall be a
that these integrally reinforced branch outlet minimum of 35 degrees. The weld bevel angle
fittings and the deposited weld metal used to on the transverse section of the fitting is based
attach the fittings to run pipes contain all the on the manufacturer's specification.
reinforcement required by the applicable
pressure vessel or piping codes without the 7. TESTS
addition of saddles or pads. 7.1 Hydrostatic testing of wrought fittings is
6.1.1 The adequacy of the design of branch not required by this Standard Practice. All
connection fittings may be established by fittings shall be capable of withstanding.
mathematical analyses contained in pressure without leakage or impairment of
vessel or piping codes. or. at the serviceability. a pressure equal to that
manufacturer's option. by proof testing in prescribed in the applicable code or
accordance with Section 7 and Annex B. regulation for seamless pipe of equivalent
Records of design or proof tests shall be material and schedule listed in Table I.
available at the manufacturer's facility for 7.2 Proof testing is not required, but when
inspection by the purchaser. performed to meet the requirements of Section
6.1.2 The pressure vessel or piping codes 6.1.1. the testing shall be conducted in
referred to in Section 6.1.1 permit a variety of accordance with Annex B.
attachment welds for these fittings. Typical
branch attachments are shown in ASME
B31.1 and B31.3.
6.1.3 Fittings shall be contoured to provide
a good fit at the opening in the run pipe. The
run attachment weld bevel angle design will 08 OCT 2012
vary with the size and type of fitting and with
the manufacturer. The size of the run opening SISTEMA DE GESTION
SGC I SGA I SST
is dependent on the manufacturer's Nomtl,.. y Anna
specification.
6.2 Buttwelding Buttwelding end finishes
shall comply with the standard welding bevel
COPIA CONTROLADA 1
and root face of ASME BI6.25.
6.3 Threads Threads in threaded fittings
shall comply with ASME B 1.20.1
requirements for NPT.
6.3.1 The minimum wall thickness at the
root of the thread at the hand tight plane shall
be equal to or greater than the nominal wall
of the pipe schedule for the appropriate
fitting class. as shown in Table I.
3
:opyrigMMSS
PfO¥icIId by IHS unci ... _ _ 'IIIIIh MSS SOld to:lNFOAMATlON HANOUHG SERVICES, 01828810
.., I'Iproductlon ot nltWOrkIng pemllMd wtIhout IlcenN kom IHS 2012N2'le:I5;580MT
I
MSS ST ANDARD PRACTICE SP-97 I
TABLE 2
90° Branch Outlets - Buttweldlng, U.S. Customary Units
I
Dimensions are in inches.
A
Outlet (Face of FlItID& to Crotch)
(NPS) StaDdard Extra StroDg Schedule 160
ReduclDg Full ReduciDg Full ReduciD& Full
1/8 0.62 - 0.62 - - -
1/4 0.62 - 0.62 - - -
3/8
112
0.75
0.75
-
0.75
0.75
0.75 0.75
-
1.12
- -
1.12
3/4 0.88 0.88 0.88 0.88 1.25 1.25
1 1.06 1.06 1.06 1.06 1.50 1.50
14 - 1.25 1.25 1.25 1.25 1.75 1.75
1~ 1.31 1.31 1.31 1.31 2.00 2.00
2 1.50 1.50 1.50 1.50 2.18 2.18
2~ 1.62 1.62 1.62 1.62 2.44 2.44
3 1.75 1.75 1.75 1.75 2.88 2.88
3A 1.88 2.00 1.88 2.00 . .
4 2.00 2.00 2.00 2.00 3.31 3.31
5 2.25 2.25 2.25 2.25 3.69 3.69
6 2.38 2.38 3.06 3.06 4.12 4.12
8 2.75 2.75 3.88 3.88 - -
10 3.06 3.06 3.69 3.50 - -
12
14
3.38
3.50
3.38
3.50
4.06
3.94
3.94
4.12
-
-
--
16 3.69 3.69 4.18 4.44 - -
18 3.81 4.06 4.38 4.69 - -
20 4.00 4.62 4.69 5.00 - -
24
Tolerances. I:t, - J~.
4.56
± .03 In.
5.38 5.50 5.50 - -
1 - 4 ± .06 in.
5 -12 ± .12 in.
14 -24 ± .19 in.
TABLE 3
90° Branch Outlets - Threaded, U.S. Customary Units
/
I
AN om.
'"'- -/
5
Capyrtght MS8
PIOYIdecI by IHS under 1IcI_ willi MIS SoIdIO;INFORMATlON HANOUNG SERVICES, OI_It
No replOducIIon or nIbwofkIng PIIrmlllMi 'IfIIIhout lice,... from IHS 201211128 tI!:15:580MT
MSS ST ANDARD PRACTICE SP-97
I
TABLE 4
90° Branch Outlets - Socket Welding, U.S. Customary Units
f I
I
B
I I
1,----
I
C
1 J
"'--
o
_ ....
P-'OIOby IHS UI'dIII . . . . "'" lollS
HI) ~ or /WhIOIWno pemWIIO ..,.,.,. bNe IJom IHS
6
6otd ~T1ON HAHDU«l RJMCES. 0'.."
201ZWl81 8:1S:5I OMT
MSS STANDARD PRACTICE SP-97
I
TABLES
45° Branch Outlets - Buttwelding, U.S. Customary Units
i are in inches.
A
Outlet (TOpOl to Run Pipe)
(NPS) lilt.nA -r<\ 1 Extra
A Min. A Max.
1/4 I
I.
I.
~.
TABLE 6
45° Branch Outlets - Threaded, U.S. Customary Units
I are in inches.
A
Outlet (ToP of: : to RUD PI~
(NPS) Class 1000 A Class ~ 000 A
1----:-:7-+----'A7.MiJ1. A MaL A MiD. A.M!'L
1/4 1500 I~ 1.531 1.87~S_-I
.500 ..681 .&ll.
.
r-~~--r---TS~OO---+---7~---+---7~--~--~~~~
..812 .50(
.125 :.406
2.106 1.001 :.~ ,3
2. iOO 1.001
2 3.100 3.31 3 .~ 14 4.12!
o
8
SOIdto:JNFOl'NAT1OH HANOUHO §RVICES. 01_'.
2012/Wa 11:15:51 our
M SS ST ANDARD PRACTI CE SP-97
• •
TABLE 7
45° Branch Outlets - Socket Weldin&. U.S. Customary Units
i are in inches.
A
Outlet BMin.(a) (Top or I'ImDI to RUD Pipe)
(NPS) ~3000 ClusliOOO
AMu.
1/4 1.3 ~. AI ~~ ..8
3/8 I ;3 .8
112 1.3 .51 .750 I .1:
3/4 .8 :.000 2.
I .1 00 2.
IV. t.41 3,
IV, 0.50 :.s() 3.0 3.375
2 0.62 .00 3 .~ 4.125
Note: (8) "B" Minimum Socket Depth per ASME B16.11
ANNEXA
SI (Metric) Tables A2 through A7
TABLEA2
90° Branch Outlets - Buttwelding, SI (Metric) Units
I
A
I
Dimensions are in millimeters.
A
(Fa~e of Flttioa to Crot~bl
Oudet Oudet
(DN) (NPS) Staodard Extra StroOI &bedule 160
Reducblg F.n Red.clog Fun Redacma Full
6 lIB 15.7 - 15.7 - - -
8 1/4 15.7 - 15.7 - - -
10
IS
3/8
112
19.1
19.1
-
19.1
19.1
19.1 19.1
- -
28.4
-
28.4
20 3/4 22.4 22.4 22.4 22.4 31.8 31.8
25 I 26.9 26.9 26.9 26.9 38.1 38.1
32 IY. 31.8 31.8 31.8 31.8 44.4 44.4
40 I Y2 33.3 33.3 33.3 33.3 50.8 50.8
50 2 38.1 38.1 38.1 38.1 55.4 55.4
65 2'h 41.1 41.1 41.1 41.1 62.0 62.0
80 3 44.4 44.4 44.4 44.4 73.2 73.2
90
100
3Y.
4
47.8
50.8
50.8
50.8
47.8
50.8
50.8
50.8
-
84.1
-
84.1
125 5 57.2 57.2 57.2 57.2 93.7 93.7
ISO 6 60.4 60.4 77.7 77.7 104.6 104.6
200 8 69.8 69.8 98.6 98.6 - -
250 10 77.7 77.7 93.7 88.9 - --
300 12 85.9 85.9 103.1 100.1 -
350 14 88.9 88.9 100.1 104.6 - -
400 16 93.7 93.7 106.2 112.8 - -
450 18 96.8 103.1 111.2 119.1 - -
500 20 101.6 117.3 119.1 127.0 - -
600 24 115.8 136.6 139.7 139.7 - -
o
Tolerances: 6 - 20 ± 0.8 mm
25-100 ± 1.6mm
125-300 ±3.2mm
350 - 600 ± 4.8 mm
10
Sold ICIdNfOfIIMAT1OH twClUNQ IIJMCH.
2OtZ/ll'llll:tl:5e OMT
Ot_,.
1
MSS ST ANDARD PRACTICE SP-97
ANNEX A (Continued)
SI (Metric) Tables A2 through A7
TABLEA3
90" Branch Outlets - Threaded, SI (Metric) Units
f
/
I
ANom.
"'-- -...r
TABLEA4
90° Brancb Outlets - Socket Welding, SI (Metric) Units
f I
B
I I
L,----
,
t
C
"'- -.7
o
12
M SS STANDARD PRACTI CE SP-97
I
A NNEX A (Continued)
SI (Metric) Tables Al through A7
TABLEA5
45° Braoch Outlets - Buttweldlog. SI (Metric) Uoits
\3
ScId IO: ~TIOH HANDL.Jr.a S&MCU. 0'_"
201ZN28 to;t5M OMT
M SS ST ANDARD PRACTICE SP-97
I
•
ANNEX A (Continued)
SI (Metric) Tables A2 through A7
TABLEA6
45° Branch Outlets - T hreaded, SI (Metric) Units
o
_
~."
....
.. "'*' .... wlth MSS
No ~or ~g PlfT'lll*lwIIhoIa IcInM 1l'0III ItS
14
SoId trx_OAMATlON HANOUNO IlERVICES, 01828811)
2012N21 10;11:M 0..,.
•
ANNEX A (Continued)
SI (Metric) Tables A2 through A7
TABLEA7
45° Branch Outlets - Socket Welding, SI (Metric) Units
15 , ......,.".,., ..,
Sold Io:INFORWATlON HANDUNQ SERVICES, Ot tztl,O
20121W2& le~I$;HGMT
MSS ST ANDARD PRACTICE SP-97
I
ANNEXB
Design Proof Test
ANNEXC
Referenced Standards and Applicable Dates
This Annex is an integral part of this Standard Practice and is placed after main text for convenience.
17
COpytIQIIt MIS
PfooIoII:tId by IHS ulldlt IoINI • • " _I SOld 1O.1NFOI'VtoIIATION HAHDUNQ SERVICU, 0112"1'
No~Of~~~ _ _ 1ronI1HS .'iNa 11:15:&1GMT
o
o
LUnUty 01 MOO OU:ltJU_IU rn.\O.ucw:. \tlD VI IVltlYI LV 1'1
TITLE
SP·6-2012 Stondatd Finishes forContDCI Faces of Pipe FlAnaeslll'ld Connmlna·End FIonSCS ofVDlvCl and Flttlnp
SP.,.2008 Spot Fatlna for Bronze. Iron tnd SIecI Flslges
SP·25·2008 StandIrd M.ki1lJ System for Volves. RUin... FIqcs. ond Unions
SP-42·2009 COfTOIIon RcsisWnt Gat~ Globe. Anale Dnd Check ValvCl with FlInacd and Buu Weld Ends (CIasscI15o. 300 A 6(0) ~
SP-43·2OOI Wroupt Dnd Fabrk:.tcd Butt·WeldinaFlttinp for Low Pmsun. COITOIion RalIIant Applications (Inc!. 2010 ErrMo Sheet)
SP....2010 SkelPipeUneflan&cs(IncI.2011 EmtaSheet)
SP-45-2003 (R 200B) Bypas ood Dram Cooocctions
SP·51·20I~ CIao 150l W Coon>oIon RaItIIaI FI_ .... Call FIaopd Flnlnp
sP·5).1999
--..M_
(R2OO7)QuoIiIySlandonl lOrs...ICoIIinp ..... .,....... lOr V.....,.,....... ..... .,............ 0dIcr ........ ~ - M..,-_
SM.·I999
SP·55-2011
(R 2007) QuoIiIy SIandonI lOr Sled Cald".. ood f«aIna> C.. V _ fIonaa, ood fInIoss ond 0Ihcr PiJ*'I CompononIs - r"
Qualhy SWMiard fot Steel Catlnp far Valves, Flanau, Fll1lnp., and Ckhcr Pipins Componenu - VisuAl Method far EvDluldan af
f.""" -.... MctIoocI
Surf,," Inqul..ttic:s (ANSI.pprwed ~ N. . . .I SCaadard)
SP·5&-2009 Pipe Hqen and Supports - MaIeria1s. Oesip. MAnufoccute. Sclec:tion, Applic:Dtion. InClIMtillMlon (1nc0lp0f1ltC:t CAntent ofSP.69. n. 89. and 90)
(ANS11ppnrved ~ NadMW Staaclard)
SP.6I).20 12 Connectina Flanae Joints between T appina S1eevcslUld T"",ina Volva
SP.06I·2009 Prcuure Tatlna of Valva
SP·65·2012 Hlp PrcssUfe Chemical Industry Flanaes and lbrcadcd Stubs for Use with Lens Gaskets
SP.067·2011 BldlctfIy Volva
SPa68-2011 Hip Prasure BldlctfIy Volva with OffICI DcsJan
sp~2oo3 Pipe Hangen and Supports - Selection and AppUca&lon (ANSI..pproved America. Nadoul Sea.clanl)
Sp·7D-20II Gray Iron Gate VDlva. FlIIf1pd and Threaded Ends
sp·71·20 II Oro)' Iron Swina Check VDlvCl. Filltged and Threaded Ends
SP·72·20IOa BoD Volveswith Flonpd or Butt.Weldina Ends fat General Servlc:e
sP·75·2001 SpocIIIcootIon Cor H1p·Test, WroooahI. B...·W.. d... Fl.....
SP·78--2011 Groy Iron PI. Valva, FlInpdtnd Thraded Ends
SP·71).2011 Socket WeldlllJ Rcduc:erlnsertl
SP·ao.2008 Bronze Gate. Globe, Angle, tnd Check Valves
SP-II·20060 SIIInlc:u Sled. Bonnetless, FlInpd Knife Ga&c Valves
SP-I)·lOO6 Class 3000 Steel ~ Unions Socket Welding tnd 1lutad.d
SP-85-2011 Gnoy 10... Globe & """" VoI_ FIaopd ..... 1Iwadod Eoob
SP.a6-2009 Guidellnel fot Metrie Doll in St.ndMb for Valves. f1Inps. Flttfnp, Ind ACCUIIkIn (tnc:l1011 Emta Shccl)
SP-87·I991 (R 1996 - ............. 2011) FiiCICXy-Madc B... ·WcIdinIJ Flu .... C.. a-I_Pipin.App6........
SP· ...2010 DiIphntpn Valva
SP·91·2009 GuideUnes for Manual Opcl'ltion of Valva
SP·92·2(112 MSS Valve U., Guide
SP·93·2008 QualIty SUndIrd for Steel CutinI' and Forginp for Valves. f1Inaes. Fiftinp. tnd OdIer PiplllJ Componentl - Liquid Penetrw1t
Examinotlon Method
SP.94-2OO8 Quality S&andard for Fmitic and Mattenlltle Steel ea.elnp for VDlvCl. Flanges. Fiuinp. and Olher Pipina Componcntl - Ultruonle
Eumlnation Method
SP·95·2006 Swqo(d) Nippl.. ond Bull Pi....
SP·96-2011 GuldeUnes on Tenninology for Volves and Flttlnp
SP·97·2012 IntepDlly Reinforced For;ed Branch Outlet Fialnp .. Socket Woldln" Threaded. and Bunwcldina Ends
SP·98·2012 ProtectiveCOGIlnp for the lntcriorofVolves. Hydnmtl. and Fhtinp
SP.I)9.2010 Instrument VDlves
SP·lDO-2009 QuoDfiCQ11on Requirements for Elastomer o;aphrqrnt fat Nuclear Service o;aphragrn Volves
SP·I 0 1·1989 (R 200 I) hit·Tum VDlvc Actuator Attachment .. Flanae ond DRvin, Component Dimensions and Performance Chamcteristlcs
Sp·I02·1989 (R2001) Muki·Tum Volve ACW8tOt AttDChment .. FllInIC and DrivlnaComponcnt Dimc:nsJons and PerfonnonccChanlclCristics
SP·I()4..2(l12 Wroupt CoppcrSoJder..Joint Pressure Fitdnp
Sp·I05·2010 Instrument Valves forCode Appdcaliona
sP· I06-20 I 2 CaIIC_AUoy~""'FIaopdFlnlnp,a-I2$.I50.""')oo
SP·I()8..2012 RaDIc:nl·SeaIodCut Iron Eccc:ntric PILlS Valva
Sp·I09.2012 WcJded.Fabricated Copper Solder-joint pretIlft Fitinp
Sp·II().2010 u.u Valves Thteadcd. Sockd·Weldins.SoIder Joint, Grocwcd InCl FlDred Encb (1ncL20IO E,... Sheet)
Sp·lll·2012 Gray.lron Mel Ouc:tik-lron TopplngSlena
SP·112·2010 QuIIlty SUwtard fot Evaluad~ of Cut Swl'ace Flnbha - Visual and Tactile Method. This SP must be used with a l<kurface. tbfte dimensional Cast
Surface Cocnp.nI&Or. which b 0 noc:enary pan afthc s&anciIrd. Additional Cornpenton OYOilabic tepCItI1Cly.
Sp·ll)'2012 ConnectI,.Jalnll bctwccn ToppinaMachInes Iftd. Tapplna Valves
SP·II4-2007 Conosion Ralu.tt Pipe Fitttnas Thtcadcd and Sockec WeldinaCla. ISO Ind 1000 (ANSI1PpromI Mteriela N.c&o.ol StaNard)
Sp·II5·2(l10 Excas Flow Valva, 1% NPS and Smaller. for Fuel Gas Sctvlce
SP·I 16.201 I Servk:ct-Linc Valves and Flttinp for Drinklna Wacet Systems
SP·I 17·201 I BcDaWi Seals for Globe and Gate Volves
Sp·II&-2007 Compact Steel Globe & Check Valva - Flanged, FlIIf1aoteu. Threaded & Weldina Ends (Chemical & Petroleum Rcnntty Servlc:e)
SP·III).20IO Factory·Made Wrought BeUed End Pipe Fitlinp for Sackcl.Weldina
SP·12D-2011 Flexlble Gnaphite Packina System for RUlna SICIft Valvcs - Daian Requirements
SP·121·2006 Qualification T Cltlna Methods for Stem Packina fat RUina SICIft S&ecl Volves
Sp·I22·2012 Plastie Industrial 8411 Volves
Sp·I23·1998 (R 2006) Non·FetrO\II Threaded and SoJder.Jalnt Union. fat Use with Copper WIterTube
SP·124-2012 Fabricated Tappina Sleeves
SP·I25·2010 Gray Iron and Ductile Iron In·Une. Sprina·l.oAded, CenlCT· GulcIed Check VDlva
SP·126-2OO7 SleeIIn·Unc Spring.Assistcd Center Guided Check Valves
Sp·127·2ool Brxln,1Or PipillJ Systems Sei.smIc·WInd·Dynarnic OctIan. Scle:ction. Application
SP·128--2011 Ductile Iron a.tc Volves
SP·IlC).2003 (R 2007) C~Nickel Sockee.·Weldina FiUlnp tnd UniON
SP·I)().lOO3 8eUows SeDlt lOt lnstnament VDlves
SP·131·2010 MetaUle ~uaPy 0pe:nIed Gas DlstriIMaioa Valves
SP·132·20IO Co...... Woo PacklnsSystems for InstrumcN Valva
SP·13).2010 Excea Flow Vatva for Low PraMwe FuW Gal AppIlanca
SP·134-2012 Valva fcwCryogcnIe Service, includina RcquiranattI fot BodyIBonnec Extemions
SP·135-2010 HJah Prets\Ire Knife Ga&c Volvcs
SP·136.2007 0uc:tUe Iron SwlllJCheck Valva
SP·l)7·2007 Quality S&andard fot Potkive Motcriot Identification of Metal Valves, FI. . . . Flttlnp, and Other PipinaComponentI
SP·138·2009 QuaUty Standard Prxticc: forOxypn QaIn" afVoIves&: FlU...
SP·131).2010 Copper Alloy Gate. Globe, Angle. Dnd Check Valves rot Low PreaurelLow TemperatutC Plumbin8 Applicotiont
SP·14D-2012 Quality Stondatd Practice for Preparation of Valva and Flftlnp for SiliCOM-Frce Servic:e
SP·141·2012 Multi·Twn ond Check Valve ModifiCIWon.
SP·'42·2012 Excas Flow VDlvCl for Fuel Gu Service. NPS I~ throuah 12
SP·,143·2012 Uvc-LoGded VolveStem PackinaSystems
(R :nAR) Ind6catet year reatllrmed • PrIce Liat Av.llllbl. Upon Requ..t • MSS .. an ANSI-acaedited Amet1can Ndonll Standard. developer