You are on page 1of 2

2013 Ford Explorer

Submodel: | Engine Type: | Liters:


Fuel Delivery: | Fuel:

501-05 Interior Trim and Ornamentation 2013 Explorer


REMOVAL AND INSTALLATION Procedure revision date: 09/14/2012

Door Trim Panel — Rear


Exploded View

Item Service Part Number Description Torque Material Name Notes


1 W713297 Rear door trim panel retaining clip (7 required) - - -
2 W520832 Rear door trim panel nut - - -
3 27406 / 27407 Rear door trim panel (Right Hand (RH) / LH ) - - -
4 14524 Rear door window switch bezel (Right Hand (RH) / LH ) - - -
5 14529 Rear door window switch (Right Hand (RH) / LH ) - - -
6 275A18 / 275A19 Rear door trim panel handle cup (Right Hand (RH) / LH ) - - -
7 W505424 Rear door trim panel bolt 7 Nm (62 lb-in) - -
8 672A40 / 672A41 Rear door trim panel bolt cover (Right Hand (RH) / LH ) - - -
9 W708392 Rear door trim panel screw (2 required) 1 Nm (9 lb-in) - -
10 22620 Rear interior door handle bolt cover - - -

Removal

1. Remove the rear door upper panel.

2. Remove the rear window control switch. REFER to Section 501-11, Window Control Switch.

3. NOTE: Front door interior door handle bolt cover shown, rear similar.
Using a non-marring tool, remove the rear interior door handle bolt cover.
4. NOTE: Front door trim panel bolt cover shown, rear similar.
Using a non-marring tool, remove the rear door trim panel bolt cover.

5. Remove the rear interior door handle bolt and the rear door trim panel bolt.

6. Remove the 2 rear door trim panel screws.

7. Using a non-marring tool, release the 7 rear door trim panel clips.

8. Disconnect the door trim panel electrical connectors.

9. NOTE: Front door interior door handle cable shown, rear similar.
Release the rear interior door handle cable and remove the rear door trim panel.

Installation

1. To install, reverse the removal procedure.

1. Inspect and replace any damaged or broken rear door trim panel clips.

2. Transfer parts as necessary.

Copyright © 2013 Ford Motor Company

You might also like