Professional Documents
Culture Documents
00063548001075223494
00063548001075223494
A B
P T
II I
1 2 3
T A P B
7 6 5 4
Design The 4/3-way hand lever valve is mounted on a function plate equipped with four
quick coupling connectors. The component is fitted to the grid system of the slotted
assembly board by means of the two blue levers (mounting variant “A”).
The valve consists of: Piston (1), housing (2), spring (3), stem (4),
through-guide (5), round pin (6), eccentric cam (7)
and lever (8).
© Festo Didactic GmbH & Co. KG, 04/2003 Subject to change 1/4
152975
4/3-way hand lever valve with closed mid-position
Function Used for the control of flow rates, this valve is actuated manually and engages in
three positions. Its characteristic, apart from the method of actuation, is the closed
mid-position.
The piston (1) is pressed against the eccentric cam (7) by means of the spring (3) via
the stem (4) and the round pin (6). The T-channel of the eccentric cam chamber is
sealed by the through-guide (5) of the stem (4). The round pin (6) in conjunction
with the cut-outs in the eccentric cam ensures a detent mechanism.
The sectional view illustrates the mid-position with closed ports P, T, A and B.
Switching position P to A is obtained by means of lever position I. Here, port P is
connected to port A via the annular groove of the piston (1), and simultaneously port
B to port T via the second annular groove. Position II of the lever (8) causes port P to
be connected to port B via the annular groove of the piston (1) and simultaneously
port A to port T via the second annular groove.
1.4
p (MPa) ν : 22 cSt
ϑ : 35 °C
1.0
0.8
0.6
0.4
0.2
0
0 1 2 3 4 5 6 qV (l/min) 8
P}A}B}T
P}B}A}T
Pressure-drop/flow-rate characteristic
2/4 Subject to change © Festo Didactic GmbH & Co. KG, 04/2003
152975
4/3-way hand lever valve with closed mid-position
Actuation Manual
© Festo Didactic GmbH & Co. KG, 04/2003 Subject to change 3/4
4/4 Subject to change © Festo Didactic GmbH & Co. KG, 04/2003