Professional Documents
Culture Documents
Special
Results
Characteristic Specifications and Judge
No. Characteristic Tools Reports / Comments
/ Key Feature Tolerances 1 2 3 4 5 ment
ID
No Scrathes,
1 Appearance Visual Check OK OK OK OK OK OK
Cracks & Rust
2 Hardness Hardness Tester 23 - 32 HRC 24.76 26.60 - - - OK USE 2 SAMPLES
3 Internal Width (Md) Caliper 153.5 ± 1 153.15 155.10 154.80 155.39 154.63 NG
4 Internal Width (Lw) Caliper 155 ± 1 154.70 154.60 154.39 155.56 154.72 NG
5 Bending Height Ruller + L Square 430 ± 3.5 428.00 428.00 428.00 428.00 428.00 OK
6 Thread Length ( R) Caliper 100 +3/-0 100.69 101.32 101.56 101.92 101.71 OK
7 Thread Length (L) Caliper 100 +3/-0 101.49 101.27 101.57 101.88 101.74 OK
14 Coating Thickness Thickness Tester 20μ MIN 35.00 36.00 39.30 38.30 30.00 OK