Professional Documents
Culture Documents
7 hot pressing
In addition to the above antifungal chemicals insecticides and termite proof power will
be added, suitable depending up on the requirement
Process flow chart
WOOD PEELING
VENEER
VISUAL INSPECTION
VENEER CLIPPING
DIPPING IN CHEMICAL
SETTING
VENEER TENDERISING DRYING & GRANDING OF
OPTIONAL PANEL
CORE
VENEER
CORE VENEER SIZE GLUE SPREADING WITH
CUTTING ON CORE VENEER GLUED
CORE
VENEER
D FACE
FACE VENNER PREPARATION
VENEEE
R
HEAT
HOT PRESSING
BOILED
TIME
PLYWOOD BOARD
COMPRES PRESSUR
SOR E
TRIMMING/STANDING FINISHING
AND FINISHING PLYWOOD BOARD
Core drying
UF resin – 100 kg
Maida – 8 kg
TSP – 0.5 kg
Pf resin – 100 kg
CSP – 5 kg
BWP
Pf resin – 100 kg
FOR ASSEMBLING
For manufacturing MR & BWR grade plywood following press chart instruction clearly
2. pressure, temperature and time shall be adjusted as per hot press chart.
3. assembled board shall be loaded in to the press centrally balanced and accurately
1. Hot pressed boards are cut into required size using cutting machine
2. Cutting must be straight and right angle
3. Use proper grinded saw bladed only
4. Place the boards on the cutting trolley
5. Push the trolley in uniform speed to get smooth cutting
6. Don’t put the hand near the saw blade
SANDING
ROW MATERIAL
1. Face veneer
2. Core veneer
3. Resin