Professional Documents
Culture Documents
Technical Specification: Project: Milagrosa Village CMP Location: Sagana, Santiago City
Technical Specification: Project: Milagrosa Village CMP Location: Sagana, Santiago City
TECHNICAL SPECIFICATION
All trees within the project area if there’s any especially at the entrance must be cut first and must be
uprooted by using a dozer or similar equipment.
- Roads must be traced excavated to a minimum of 15cm and a maximum of 30cm to allow the position
of macadam or mixed aggregates.
-Spread with a minimum thickness 15 cm by a road grader and compact with a road roller with a minimum
of 3 passing and a maximum of 5 passing.
- Open earth canal with 18" and 24" diameter RC Pipes Cross Drainage position as indicated in the Plans.
-HEADWALL: Minimum thickness - 12 cm with 10mm diameter reinforcing bars spaced at 12" o.c. both
ways.
- Concrete Collars dimension must be width 15cm, thickness 10 cm with 1:2 concrete proportions.
V WATER SYSTEM
- Continuous pumping with a period of 24 hrs to ensure sufficiency and potable water can be extracted
before the contractor will be paid for his contract. Otherwise increase the depth and additional pipes must
be installed if necessary.
VI ELECTRICAL WORKS
-All electrical materials and installation must conform to the Electrical Code of the Philippines or as
approved by the local Electric Company ( ISELCO-1)
-Installation must be done by a qualified and accredited transmission line contractor by the local electric
company.
Prepared by:
RICO G. EDURESE
CE 057886-90
PTR No.1579430
Alfonso Lista
DATE: 1-16-16