Professional Documents
Culture Documents
Version 10/14/2014
Sikaflex®-221
Multi-Purpose One Component Polyurethane
Sealant/Adhesive
Technical Data (typical values). Results may differ based upon statistical variations depending upon mixing methods and
equipment, temperature, application methods, test methods, actual site conditions and curing conditions.
®
Description Sikaflex -221 is manufactured in - Can be overpainted
® accordance with ISO 9001 / 14001
Sikaflex -221 is a high-quality multi- - Can be sanded
purpose non-sag 1-c polyurethane quality assurance system and the - Lower VOC’s
sealant that cures on exposure to Responsible Care Program. - Bonds well to a wide variety of
atmospheric humidity to form a durable substrates
elastomer. Meets approvals ASTM Product Benefits - NSF registered, Proprietary
C920 types and Federal Specifications - 1-C formulation Substances and Nonfood
®
TT-S-00230C. Sikaflex -221 is tested - Elastic
and classified in accordance with
Compounds (black, gray, and
- Low odor
ANSI/UL 723 “Test for Surface Burning white)
- Resistant to weathering exposure
Characteristics of Building Materials”. - Non-corrosive
- UL listed for potable water
(black, gray, and white)
Sikaflex® -221 1 / 4
Areas of Application Method of Application cleaner and water. Do not use
®
Sikaflex -221 bonds well to a wide Surface preparation solvents on skin!
variety of substrates and is suitable for Surfaces must be clean, dry and
free from all traces of grease, oil and Overpainting
making permanent elastic seals of high ®
Sikaflex -221 can be overpainted
adhesive strength. Suitable substrate dust. The substrates must be
prepared in accordance with the when tack-free. The paint and paint
materials are wood, metals, metal process must be tested for
primers and paint coatings (2-c instructions given in the current Sika
Primer Chart. Advice on specific compatibility by carrying out
systems), ceramic materials and preliminary trials. Sikaflex
®
-221
plastics. Before using on transparent applications is available from the
Technical Service Department of should not be exposed to baking
and pigmented materials that are prone temperatures until it has attained full
to stress cracking, contact the Sika Industry at tsmh@us.sika.com.
cure. The hardness and film thickness
Technical Service Department of Sika of the paint may impair the elasticity of
Industry at tsmh@us.sika.com. This Application the sealant and lead to cracking of the
product is suitable for experienced Cartridges: Pierce cartridge paint film with time.
professional users only. Tests with membrane. Unipacs: Place unipac in
actual substrates and conditions have the application gun and snip off the Limitations
to be performed to ensure adhesion closure clip. Cut off the tip of the
and material compatibility. Avoid application below 41°F (5°C)
nozzle to suit joint width and apply and above 104°F (40°C). Do not
the sealant into the joint with a apply on frozen or wet surfaces or
Cure Mechanism suitable hand operated or
® through standing water. Do not
Sikaflex -221 cures by reaction with compressed air gun, taking care to apply over silicones or silane
atmospheric moisture. At low avoid air entrapment. Once opened, terminated polymer sealants or in
temperatures the water content of packs should be used up within a the presence of curing silicones or
the air is generally lower and the relatively short time. Do not apply at silane terminated polymer sealants
curing reaction proceeds somewhat temperatures below 41°F (5°C) or Contact with alcohol or alcohol-
slower (See Diagram 1). above 104°F (40° C). The optimum containing solvents will prevent
temperature for substrate and cure.
sealant is between 59°F (15°C)
and 77°F (25°C). For advice on Danger
selecting and setting up a suitable Contains: titanium dioxide (CAS:
pump system, as well as on the 13463-67-7), xylene (CAS: 1330-20-
techniques of pump operated 7), ethylbenzene (CAS: 100-41- 4),
application, please contact the 4, 4'-methylenediphenyl diisocyanate
System Engineering Department of (CAS: 101-68-8), Quartz (SiO2)
Sika Industry at tsmh@us.sika.com. (CAS: 14808-60-7), Carbon black
(CAS: 1333-86-4). Combustible
Tooling and finishing liquid May cause an allergic skin
Tooling and finishing must be reaction. May cause allergy or
Diagram 1: Curing speed Sikaflex®-221 carried out within the tack free time asthma, symptoms or breathing
of the sealant. We recommend the difficulties if inhaled. May cause
Chemical Resistance use of soapy water. Other finishing cancer. Reports have associated
® repeated and prolonged exposure to
Sikaflex -221 is resistant to fresh agents or lubricants must be tested
water, seawater, limewater, sewage for suitability/compatibility. some of the chemicals in this
effluent, diluted acids and caustic product with permanent brain, liver,
solutions; temporarily resistant to kidney and nervous system
Removal damage. Intentional misuse by
fuels, mineral oils, vegetable and ®
Uncured Sikaflex -221 can be deliberate concentration and
animal fats and oils; not resistant to
organic acids, alcohol, concentrated removed from tools and equipment inhalation of vapors may be harmful
®
with Sika Remover-208 or another or fatal. WARNING! This product
mineral acids and caustic solutions
suitable solvent. Strictly follow contains a chemical known in the
or solvents. The above information
solvent manufacturer’s warnings State of California to cause cancer.
is offered for general guidance only.
Advice on specific applications will and instruction for use. Once cured, WARNING: This product contains a
the material can only be removed chemical known in the State of
be given on request. Contact the
mechanically. Hands and exposed California to cause birth defects or
Technical Service Department of
skin should be washed immediately other reproductive harm
Sika Industry at tsmh@us.sika.com.
using a suitable industrial hand
Sika Corporation
Industry Division
Sikaflex® -221 2 / 4
Sika Corporation
Industry Division
Sikaflex® -221 3 / 4
Sika Corporation
Industry Division
Sikaflex® -221 4 / 4