Professional Documents
Culture Documents
ASTM Volume 03.01, July 2018 Metals - Mechanical Testing Elevated and Low-Temperature Tests Metallography
ASTM Volume 03.01, July 2018 Metals - Mechanical Testing Elevated and Low-Temperature Tests Metallography
1/4
ASTM Volume 03.01, July 2018
Metals – Mechanical Testing; Elevated and Low-Temperature Tests;
Table of Contents Metallography
Standard Number Title
46 E562-11 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
47 E604-15 Standard Test Method for Dynamic Tear Testing of Metallic Materials
48 E606/E606M-12 Standard Test Method for Strain-Controlled Fatigue Testing
Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F
49 E633-13
(1000°C) in Air
50 E643-15 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material
Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet
51 E646-16
Materials
52 E647-15e1 Standard Test Method for Measurement of Fatigue Crack Growth Rates
Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life
53 E739-10(2015)
(ε-N) Fatigue Data
54 E740/E740M-03(2016) Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
55 E766-14e1 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of
56 E768-99(2010)e1
Steel
Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage
57 E837-13a
Method
Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications
58 E855-08(2013)
Involving Static Loading
59 E883-11(2017) Standard Guide for Reflected-Light Photomicrography
Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for
60 E915-16
Residual Stress Measurement
Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section
61 E930-99(2015)
(ALA Grain Size)
Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random
62 E975-13
Crystallographic Orientation
63 E986-04(2017) Standard Practice for Scanning Electron Microscope Beam Size Characterization
Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys
64 E963-95(2017)
Using a Hydrochloric-Methanol Electrolyte
Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and
65 E1012-14e1
Compressive Axial Force Application
66 E1049-85(2017) Standard Practices for Cycle Counting in Fatigue Analysis
67 E1077-14 Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
68 E1180-08(2014) Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation
69 E1181-02(2015) Standard Test Methods for Characterizing Duplex Grain Sizes
Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of
70 E1221-12a
Ferritic Steels
71 E1237-93(2014) Standard Guide for Installing Bonded Resistance Strain Gages
Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals
72 E1245-03(2016)
by Automatic Image Analysis
73 E1268-01(2016) Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures
Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic
74 E1304-97(2014)
Materials
75 E1319-98(2014) Standard Guide for High-Temperature Static Strain Measurement
76 E1351-01(2012) Standard Practice for Production and Evaluation of Field Metallographic Replicas
Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic
77 E1382-97(2015)
Image Analysis
Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement
78 E1426-14
of Residual Stress Using X-Ray Diffraction Techniques
79 E1450-16 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
80 E1457-15 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
81 E1508-12a Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
82 E1558-09(2014) Standard Guide for Electrolytic Polishing of Metallographic Specimens
83 E1561-93(2014) Standard Practice for Analysis of Strain Gage Rosette Data
Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-
84 E1681-03(2013)
Assisted Cracking of Metallic Materials
Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-
85 E1685-13
Echo Technique
86 E1820-17a Standard Test Method for Measurement of Fracture Toughness
2/4
ASTM Volume 03.01, July 2018
Metals – Mechanical Testing; Elevated and Low-Temperature Tests;
Table of Contents Metallography
Standard Number Title
3/4
ASTM Volume 03.01, July 2018
Metals – Mechanical Testing; Elevated and Low-Temperature Tests;
Table of Contents Metallography
Standard Number Title
127 E2818-11 Standard Practice for Determination of Quasistatic Fracture Toughness of Welds
128 E2860-12 Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels
Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under
129 E2899-15
Tension and Bending
130 E2948-16a Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
Standard Test Method for Determination of Crack-Tip-Opening Angle of Pipe Steels Using DWTT
131 E3039-16
Specimens
Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape
132 E3097-17
Memory Alloys
Standard Test Method for Mechanical Uniaxial Pre-strain and Thermal Free Recovery of Shape
133 E3098-17
Memory Alloys
4/4