Professional Documents
Culture Documents
¢ Pinpoint mode
¢ Highly effective
automatic ground balance
Technical Data:
General: Dimensions:
¢ Metal alarm: audio, visual
Power supply: 3 ea. 1.5 V standard batteries Search head (oval): 31 x 17 cm ±5 mm and vibration
D-size or 3 ea. 1.2 V
rechargeable battery KR35/62 Length of telescopic carrying bar
min. 79 cm ±5 mm
Battery life:
up to 25 hours
depending on battery type
max. 139 cm ±5 mm ¢ Length continuously adjustable
and SOIL program Transportation case: approx. 85 x 26 x 33 cm
Sweeping speed: 0.2 - 1.5 m/s — standard
0 - 0.2 m/s — pinpointing
Weights: ¢ Input for firmware upgrade
Operation temperature: -31° C to +63° C
Complete detector set during
Storage temperature: -51° C to +71° C operation (with batteries): approx. 2.5 kg
Environmental According to MIL STD 810F
conditions: 501.4-II, 502.4-I, 502.4-II, 503.4, Shipping weight with all
506.4-III, 514.5 C1 accessories: approx. 4.8 kg
All technical data are subject to change without prior notice. NATO-STOCK-Number 6665-12-393-4401
Issue 01/2013
An automatic continuous self check of six important A vibration alarm is completing the acoustic and vis-
functions including cable damage and battery level ual alarm.
control is the life insurance for the deminer. System Fine adjustment of the detector is done by means of
failures are immediately indicated by a special audio the four rigid push buttons:
and visual alarm.
-: decrease (volume, sensitivity)
The automatic detection level control guarantees a +: increase (volume, sensitivity)
long-term constant sensitivity for hours of operation C: compensation (ground balance)
independent of the battery level, temperature and : pinpointing
other environmental conditions.
The front panel contains all controls.
The modern DMPI technology (Digital Magnetic Pulse The inner and outer tube of the telescopic pole are The operation and indication elements are integrated Digital Input
Induction), and the cable free design is the logical re- protected against twisting. The length of the telescop- in the hand grip and can easily be operated with the for update of the firmware of the VMH3 respectively to
ic pole can be adjusted from 79 cm to 139 cm in just a thumb. realize your indivdual requirements.
sult from close cooperation with humanitarian and few seconds.
commercial mine clearance personnel. The LED-bargraph with 14 elements is clearly visible
even in the sunlight. The length of the bargraph pro-
portional to the metal alarm.