Professional Documents
Culture Documents
List of Is Codes Structural
List of Is Codes Structural
IS: 206 -1992 (4th Rev) Tee & strap hinges - Specification.
IS: 459 -1992 (3rd Rev) Corrugated & non-corrugated asbestos cement sheets
- Specification.
IS: 730 -1978 (2nd Rev) Hook bolts for corrugated sheet roofing -
Specification.
IS: 801 -1975 (1st Rev) Code of Practice for use of cold - formed light gauge
steel structural members in general building
construction.
IS: 802 -1977 (2nd Rev) Code of Practice for use of structural steel in (Part-1)
overhead transmission line towers - Loads and
permissible stresses.
IS: 804 -1967 (1st Rev) Rectangular pressed steel tanks - Specification.
IS: 806 -1968 (1st Rev) Code of Practice for use of steel tubes in general
building construction.
IS: 808 -1989 (3rd Rev) Dimension for hot rolled steel beam, channel and
angle sections.
IS: 811 -1987 (2nd Rev) Cold formed light gauge structural steel section -
Specification.
IS: 814 -1991 (5th Rev) Specification for covered electrodes for manual metal
arc welding of carbon & carbon manganese steel.
IS: 822 -1970 Code of procedure for inspection of welds.
IS: 875 -1987(2nd Rev) Code of Practice for design loads for buildings &
structures.
(Part 1)
Dead loads
(Part 2)
Imposed loads.
(Part 3)
Wind loads.
(Part 4)
Snow loads.
(Part 5)
Special loads & load combinations.
IS:1024 -1979 (1st Rev) Code of Practice for use of welding in bridges and
structures subjected to dynamic loading.
IS:1038 -1983 (3rd Rev) Specification for steel doors, windows &
ventilators.
IS:1081 -1960 Code of Practice for fixing & glazing of metal doors,
windows and ventilators.
IS:1148 -1982 (3rd Rev) Specification for hot rolled steel rivet bars (Up to 40
mm diameter).
IS:1161 -1979 (3rd Rev) Specification for steel tubes for structural purposes.
IS:1323 -1982 (2nd Rev) Code of Practice for oxyacetylene welding for
structural work in in mild steel.
IS:1361 -1978 (1st Rev) Specification for steel windows for industrial
buildings.
IS:1363 -1992 (3rd Rev) Hexagon head bolts, screw and nuts of product grade
(Parts 2 & 3) C-Screw (M5 to M64)
IS:1364 -1992 (3rd Rev) Hexagon head bolts, screws and nuts of product grade
(Part 4) A and B - Thin nuts (M1.6 to M64)
IS:1395 -1982(3rd Rev) Specification for low & medium alloy steel covered
electrode for metal arc welding.
Pretreatment
(Part 1)
Painting
(Part 2)
. IS:2062 -1992 (4th Rev) Specification for steel for general structural purposes.
IS:4049 -1988 (2nd Rev) Specification for formed ends for tanks and pressure
(Part 1) vessels.
strips.
IS:6533 -1989(1st Rev) Code of Practice for design and construction of steel
chimney.
(Part 1)
Mechanical aspect
(Part 2)
Structural aspect
IS:9178 -1979 Criteria for design of steel bins for storage of bulk
materials.
(Part 1)
General requirements & assessment of loads.
(Part 2)
Design criteria.
IS:9417 -1989 (1st rev) Welding of cold rolled steel bars for
reinforcement concrete construction.