You are on page 1of 2

Flex current clamp

A 1099

User Manual
Code No. 20 750 300
Measuring and Regulation Equipment
Manufacturer
Ljubljanska 77, SI 1354 Horjul
Tel.: +386 1 7558 200; Fax: +386 1 7549 226
http://www.metrel.si; E-mail: metrel@metrel.si

4. Dimensions 1. Technical Features


Flex clamps range provides us with the ability to measure
alternating current in any installation.
Thanks to the flexibility of these current transducers, one or diverse
conductors can be embraced, regardless their shape (insulated
cables, busbar trunking systems, tubes, etc.), to execute current
measuring actions.
Some of the main characteristics of Flex current clamps A 1099, are
below enumerated:
• Direct connection to 1 V AC input on measuring device, and
optional connection to other meters (data logger, multi-meters,etc.).
2 m cable lenght
• Wide measuring range (from 30 A to 3000 A).
• mV output.
• Bandwidth adapted to industrial frequencies and harmonic
analysis purposes.
• High accuracy.
116 mm
• Total rejection of d.c. component.
• Friendly use of the closing - opening system (even if wearing
gloves) due to its highly ergonomic design.
• Anti frau closing system.
68,5 mm 30 mm
• Very light, flexible and fully adaptable to busbar trunking system
and insulated cables.
• Strengthened security, regardless the working environment:
industrial or services.
• Large autonomy of the signal amplification system.

6 3
Distributor:

Producer:

METREL d.d.
Ljubljanska cesta 77
SI-1354 Horjul

Tel.: +386 1 75 58 200


Fax: +386 1 75 49 226
E-mail: metrel@metrel.si
http://www.metrel.si

Mark on your equipment certifies that this equipment meets


the requirements of the EU (European Union) concerning
safety and electromagnetic compatibility regulations.

© 2006 Metrel

No part of this publication may be reproduced or utilised in any form


or by any means without permission in writing from METREL.

2. Electrical Characteristics 3. General Characteristics


Current Ranges 30 A / 300 A / 3000 A, ACRMS Head Cable Length (double insulated) 610 mm (24”)
Output Sensitivity (AC coupled) 33.33 mV / 3.333 mV / Head Cable Diameter 14.3 mm
0.3333 mV per A
Head Bend Radius 38.1 mm
Load Impedance 100 kOhm minimum
Cable Length (head to electronics) 2 meters
Accuracy (at +25 C) 1 % of range (45 - 65 Hz) Output Connection Integrated 4 mm Safety
Linearity (10% to 100% of range) 0.2 % of reading plugs

Noise 8 mV, ACRMS (30 A), Operating Temperature Range 0 to +70 C (head)
2 mV, ACRMS (300 / 3000 A) 0 to +70 C (electronics)
Frequency Range 10 Hz to 20 kHz (-3 dB) Storage Temperature Range -40 to +105 C (head)
-20 to +85 C (electronics)
Phase Error < 1 º (45 - 65 Hz),
10 º (at 20 kHz) Operating Humidity 15 % to 85 %
(non condensing)
Position Sensitivity 2 % of range (with cable
>25mm from the coupling) Weight 180 g (head), 190 g
(electronics)
External Field 1 % of range (with cable
>200mm from the head)
Temperature Coefficient 0.08 % of reading per C
Power Supply 2 x AA / MN 1500 / LR6
alkaline
Battery Life 200 hours, low battery indicator
Working Voltage 600 V ACRMS or DC
(see Safety Standards section)

4 5

You might also like