Professional Documents
Culture Documents
Total Flow Control Solutions Tyco reserves the right to change product design and specifications KEYMC-0027-US-0112
without notice. Copyright © 2001 by Tyco International Ltd.
Keystone Figure 990/920
Thin Disc Resilient Seated Butterfly Valves
Materials
Part Material Material Standard
1. Two-piece body Cast iron ASTM A-126, Class B
with top plate Ductile iron ASTM A-395 Gr. 60/40/18
316 Stainless steel ASTM A-743 CF8M*
2. Thin profile disc 316 Stainless steel
Steel Teflon® molded**
Steel EPDM molded**
Steel NBR molded**
3. Stem 316 Stainless steel
4. Seat NBR food grade (0°F – 212°F)
EPDM food grade (-40°F – 250°F)
PTFE-lined EPDM (-20°F – 300°F)
PTFE-lined NBR (0°F – 250°F)
5. Stem packing NBR
6. Upper stem bushing Polyester
* Not available on 21⁄2-inch and 5-inch. Stainless steel bodies, 2 thru 6-inch, include upper
and lower stem bearings.
** Not available on 1-inch, 11⁄2-inch, 21⁄2-inch and 5-inch.
Teflon® is a registered trademark of the E.I. du Pont de Nemours Company.
Tyco reserves the right to change product design and specifications KEYMC-0027
without notice. Copyright © 2001 by Tyco International Ltd. 2
Keystone Figure 990/920
Thin Disc Resilient Seated Butterfly Valves
PTFE Lined
The Keystone Figure 990 and 920 is
offered with PTFE lining for mildly
corrosive services or an elastomer lining
for mildly abrasive services.
1
Contoured designs
Common BPV
.1
0 10 20 30 40 50 60 70 80 90
Tyco reserves the right to change product design and specifications KEYMC-0027
without notice. Copyright © 2001 by Tyco International Ltd. 3
Keystone Figure 990/920
Thin Disc Resilient Seated Butterfly Valves
Notes
* H dimension refers to flat on stem.
** 1-inch and 11⁄2-inch valve assemblies are
furnished with integral 10-position throttling
plate.
‘Q’ dimension is the minimum allowable pipe or
flange inside diameter at the centered body face
to protect the disc sealing edge against damage
when opening the valve.
The data presented in this bulletin is for general information only. Manufacturer is not responsible for acceptability of these products in relation to system requirements. Patents and Patents
Pending in U.S. and foreign countries. All rights reserves. Printed in U.S.A. Tyco reserves the right to change product design and specifications without notice. © Copyright 2001.
Tyco reserves the right to change product design and specifications KEYMC-0027
without notice. Copyright © 2001 by Tyco International Ltd. 4