Professional Documents
Culture Documents
51.1:RSS
June 2002 RSS Valve
Features
DĄFluid CompatibilityĊThe PFA
(perfluoroalkoxy resin)Ćlined assembly provides
corrosion protection by shielding metal parts from
the process media, making it ideal for controlling
severely corrosive media.
DĄPermeating ServiceĊA heavy duty PTFE
bellows with PTFE/carbon support rings is available
for permeating service. Compared to a standard
bellows, the heavy duty bellows design has an
enhanced resistance to permeation. This is due to a
wall thickness of 2.5 mm (0.1 inch) and pressure
retaining rings inside the bellows. An optional
N10276 nickel alloy (Hastelloy C276) bellows seal is
also available to meet the needs of severe service
conditions.
DĄPermeating/Corrosive ServiceĊA heavy duty
PTFE bellows with N06455 (Hastelloy C4) support
rings is available for permeating services which are
also corrosive. This bellows features a modified
PTFE material (TFM 1705) which provides additional
permeation protection over the original heavy duty
PTFE bellows. This bellows, used in combination W4453-1 / IL
www.Fisher.com
Product Bulletin
51.1:RSS
RSS Valve June 2002
Contents checking of the entire wall surface for pin holes and
cracks in the material during the manufacturing
process.
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Greater safety under vacuum and high temperature
Tables service is achieved by dovetail anchorings which
Valve Size, Port Diameter, Maximum Flow provide a mechanical bond, effectively preventing
Coefficient, Travel, and Stem and detachment of the lining from the cast valve body.
Yoke Boss Diameter . . . . . . . . . . . . . . . . . . . . . 3
Maximum Allowable Inlet Pressures DĄEasy InĆLine MaintenanceĊThe top entry
and Temperatures for All design eases inĆline maintenance. This design also
Class 150 and 300 Valves . . . . . . . . . . . . . . . . 5 minimizes the transfer of pipeline stress, which
Construction Materials . . . . . . . . . . . . . . . . . . . . . . 5 minimizes leakage both at the valve body joint and
seat ring.
Dimensions and Weights .............. 7
DĄLonger Life Bellows SealĊThe PTFE bellows
Coefficients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 seal is leak tight and, with proper use and
maintenance, can have an expected life cycle
exceeding 500,000 full stroke cycles. The N10276
Specifications ........................... 9 nickel alloy bellows seal, with proper use and
maintenance, can have an expected life cycle of
Features (continued) 10,000 cycles at full stroke, 100,000 cycles at 1/2
stroke, and 1,000,000 cycles at 1/4 stroke.
DĄEconomyĊBecause all metal parts are
shielded from the process fluid, the use of expensive
alloys is not necessary. Note
DĄLiner IntegrityĊLining thickness is a minimum Fisher does not assume responsibility
of 5 millimeters at all areas where the valve is for the selection, use, or maintenance
exposed to process flow (3.5 millimeters minimum of any product. Responsibility for
thickness for 1/2 inch and 3/4 inch valves). Transfer proper selection, use, and
molding techniques provide for excellent maintenance of any Fisher product
consistency, density, and low permeability. Transfer remains solely with the purchaser and
molded PFA material is translucent. This allows for endĆuser.
2
Product Bulletin
51.1:RSS
June 2002 RSS Valve
Table 1. Valve Size, Port Diameter(1), Maximum Flow Coefficient, Travel, and Stem and Yoke Boss Diameter
VALVE LIQUID FLOW MAXIMUM VALVE YOKE BOSS
PORT DIAMETER STEM DIAMETER
SIZE COEFFICIENT PLUG TRAVEL DIAMETER
(Cv) AT Heavy Duty Bellows Standard PTFE and
Inches mm Inches MAXIMUM with Support Rings Metal Bellows mm Inches mm Inches
TRAVEL(2) mm Inches mm Inches
5 3/16 0.212(3)
5 3/16 0.462(3)
1/2 and 3/4 5 3/16 0.965(3) N/A N/A
8 5/16 2.09
15 1/2 4.52
5 3/16 0.212(3)
5 3/16 0.462(3)
5 3/16 1.02(3)
1 8 5/16 1.91 15.9 5/8 19.1 3/4 9.5 3/8 54 2Ć1/8
15 1/2 3.57
20 3/4 8.41
25 1 11.5
25 1 13.4
1Ć1/2
40 1Ć1/2 28.6
19 1
19.1 3/4
30 1Ć3/16 13.3
2
50 2 44.3
50 2 43.3
3
80 3 94.1
28 6
28.6 1 1/8
1Ć1/8 28 6
28.6 1 1/8
1Ć1/8 12 7
12.7 1/2 71 2 13/16
2Ć13/16
65 2Ć1/2 69.3
4
96 4 145
1. Inch equivalents of these metric port diameters have been rounded to common fractional diameters. Actual diameter of the 15 millimeter port diameter is 0.591 inches, the 40
millimeter port diameter is 1.575 inches, and the 96 millimeter port is 3.780 inches.
2. KV = (0.865) (CV)
3. With the 5 mm (3/16Ćinch) port diameter, some variations of the flow coefficients is expected due to dimensional changes of the PTFE seat ring because of cold flow and thermal
expansions.
3
Product Bulletin
51.1:RSS
RSS Valve June 2002
TRAVEL STOP/
LOAD LIMITER
SEE VIEW A
SEE VIEW B
STANDARD PTFE
OR N10276
NICKEL ALLOY
BELLOWS
LOCKING ROPE
SEE VIEW C
SEAT RING
VALVE PLUG
LINER
BELLOWS BELLOWS
LOCKING
ROPE
BELLOWS
STEM RETAINER VALVE PLUG
ASSEMBLY
LOCKING
ROPE
SEAT RING
BUSHING VALVE
PLUG
40B4190-D
4
Product Bulletin
51.1:RSS
June 2002 RSS Valve
Table 2. Maximum Allowable Inlet Pressures and Temperatures for All Class 150 and
300 Valves
PRESSURE, BAR PRESSURE, PSIG
Ductile Iron Ductile Iron
TEMPERATURE, _C TEMPERATURE, _F
or or
Steel Valve Steel Valve
-29 to 38 19.7 -20 to 100 285
93 17.9 200 260
149 15.9 300 230
177 14.8 350 215
5
Product Bulletin
51.1:RSS
RSS Valve June 2002
A6889Ć1 / IL
0 0
-20 68 122 212 302 356_F
HASTELLOY C BELLOWS
NOTE: THE LINER DOES NOT LIMIT THE DOWNSTREAM PRESSURE RATING IN POSITIVE PRESSURE SERVICES.
1.45 0.1
vacuum (psia)
0.72 0.05
0.43 0.03
0.29 0.02
vacuum (bar)
0.14 0.01
0.07 0.005
0.04 0.003
0.03 0.002
A6889Ć1 / IL
0.015 0.001
68 122 212 302 356_F
6
Product Bulletin
51.1:RSS
June 2002 RSS Valve
Table 4. DIN FaceĆtoĆFace Dimensions Mating with Table 6. ANSI/ISA Class 300 FaceĆtoĆFace Dimensions
ANSI Class 150 Flanges Mating with ANSI Class 300 Flanges
Valve DIMENSIONS Approximate DIMENSIONS Approximate
Valve
Size, A B D Ej Weight Size, A B D Ej Weight
Inches mm Kg Inches mm Kg
1/2 130.0 60.0 141.5 89.0 6 1 197.0 90.0 199.0 123.8 11
3/4 130.0 60.0 141.5 98.0 6 1Ć1/2 235.0 101.0 220.0 156.0 18
1 160.0 72.0 199.0 115.0 11 2 267.0 115.0 228.0 165.0 20
1Ć1/2 200.0 86.0 220.0 150.0 17 Inches Pounds
2 230.0 97.0 228.0 165.0 20
3 310.0 128.0 330.0 200.0 39 1 7.75 3.54 7.83 4.87 25
4 350.0 176.0 340.0 220.0 42 1Ć1/2 9.25 3.97 8.66 6.14 40
2 10.50 4.53 8.98 6.50 45
Inches Pounds
1/2 5.12 2.36 5.57 3.50 13
3/4 5.12 2.36 5.57 3.86 13
1 6.30 2.83 7.83 4.53 23
1Ć1/2 7.88 3.38 8.66 5.91 38
2 9.06 3.82 8.98 6.50 43
3 12.20 5.04 13.00 7.87 86
4 13.78 6.94 13.39 8.66 92 MATCH LINE
FOR ACTUATOR
7
Product Bulletin
51.1:RSS
RSS Valve June 2002
Coefficients
Table 7. Design RSS Valve Body
8
Product Bulletin
51.1:RSS
June 2002 RSS Valve
Specifications
Valve Sizes For N10276 Nickel Alloy Bellows.
JĂ1/2, JĂ3/4, JĂ1, JĂ1Ć1/2, JĂ2, JĂ3, JĂand Full Stroke: 10,000
4Ćinches 1/2 Stroke: 100,000
1/4 Stroke: 1,000,000
FaceĆToĆFace and Flange Compatibility
Temperature Capabilities
DUCTILE IRON STEEL
RaisedĆFace Flange
Positive Pressure Service: -29 to 177_C
VALVE
Class 150 Class 300 Class 150
(-20 to 350_F) (see figure 3).
SIZE, IN.
SIZE IN Vacuum Service: -29 to 177_C (-20 to 350_F)
FaceĆToĆFace
(see figure 4)
ANSI(1) DIN(2) ANSI(1) DIN(2) ANSI(1) DIN(2)
1/2 ĆĆĆ X ĆĆĆ ĆĆĆ ĆĆĆ X
3/4 ĆĆĆ X ĆĆĆ ĆĆĆ ĆĆĆ X Standard Flow Characteristic/Valve Plug Style
1 X X X X ĆĆĆ X
1Ć1/2 X X X ĆĆĆ ĆĆĆ X
Equal percentage
2 X X X ĆĆĆ ĆĆĆ X
3 X X ĆĆĆ ĆĆĆ ĆĆĆ X Flow Direction
4 X X ĆĆĆ ĆĆĆ X X
1. For ANSI/ISA faceĆtoĆface dimensions, see figure 5. Up through the seat ring (see figure 2)
2. For DIN faceĆtoĆface dimensions, see figure 5.
Flow Coefficients
Maximum Inlet Pressures and Temperatures(1) See table 1, the section titled Coefficients in this
See table 2 bulletin, or Fisher Catalog 12
Downstream/Outlet Pressure Ratings(1) Port Diameters and Maximum Valve Plug Travel
See figure 3 for positive pressure service ratings See table 1
See figure 4 for vacuum service ratings
Bonnet Style
Application Limits
Plain
Liquid Service: For cavitating applications,
contact your Fisher sales office
Packing Arrangement
Gas Service: Velocity 0.33 MACH
Braided PTFE rings
Shutoff Classification
Class VI per ANSI/FCI 70Ć2 and IEC 60534Ć4 Yoke Boss and Stem Diameter
See table 1
Bellows Seal
JĂStandard PTFE or JĂHeavyĆduty PTFE with Approximate Weight
PTFE carbon support rings or JĂN10276 See figure 5
(Hastelloy C276) See table 3 for
pressure/temperature ratings or JĂHeavyĆduty Options
PTFE with alloy C4 support rings
JĂBonnet tapped for a 1/8Ćinch NPT remote
Construction Materials venting, purging, or for gauge mounting
JĂLineĆFlange gasket, (stainless steel insert,
See table 3 compression gasket, and PTFE overlay) with
thickness of 5.1 mm (0.20 inch) for 1/2Ć through
Expected Life Cycle 2Ćinch sizes, and 7.1 mm (0.28 inch) for 3Ć and
For Standard PTFE bellows. 4Ćinch size valves
Full Stroke: 500,000 JĂTool for removing and installing the seat ring
1.ĄThe pressure/temperature limits in this bulletin and any applicable standard or code limitation for the valve should not be exceeded.
9
Product Bulletin
51.1:RSS
RSS Valve June 2002
10
Product Bulletin
51.1:RSS
June 2002 RSS Valve
11
Product Bulletin
51.1:RSS
RSS Valve June 2002
Fisher is a mark owned by Fisher Controls International, Inc., a business of Emerson Process Management. The Emerson logo is a
trademark and service mark of Emerson Electric Co. All other marks are the property of their respective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy,
they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use
or applicability. We reserve the right to modify or improve the designs or specifications of such products at any time without notice.
Fisher does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and
maintenance of any Fisher product remains solely with the purchaser and endĆuser.
12
EFisher Controls International, Inc. 1985, 2002; All Rights Reserved Printed in USA