Professional Documents
Culture Documents
com
MFCV001
Single-Seated Control Valve
Catalogue
Features .................................................................................. 1
Characteristics. . ........................................................................ 2
Specifications........................................................................... 3
Packing System........................................................................ 4
Micro-Flow Valve Trim Design...................................................................9
Shutoff Capability...................................................................................... 10
Bonnet Selection........................................................................................ 11
Valve Body/Trim Combination.............................................................. 13
Temperature Limits for Valve Body/Trim and
Construction Materials............................................................................. 14
Maximum Allowable Pressure Drops for Valve Trim...................... 17
Gasket Material and Maximum Allowable Pressure Drops......... 18
Flow Coefficient.......................................................................................... 19
Travel and Port/Stem/Yoke Boss Diameters..................................... 20
Temperature-Pressure Ranges for Valve Body and Trim............... 20
Dimension and Weight............................................................................. 22
Ordering Information............................................................................... 23
Figure 1. MFCV001 Single-Seated Control Valve
Control Valve Design Worksheet........................................................... 24
Assembled with ADD Actuator
1
Master Flo Valve Inc. | MFCV001
Characteristics
Special trim design increases stability Excellent sealing
The Trim construction design is post-guided trim. This stabilizes the The packing system uses material of PTFE, graphite or duplex packing,
valve plug at all points of its travel, and reduces vibration, mechanical with live-loading design, offering reliable and excellent stem sealing,
noise and trim wear. and reduces the cost of packing replacement.
Excellent low-flow control Metal seat has the shutoff classification of Class IV & V, and PTFE
composition seat with Class VI. (per standard ANSI/FCI 70-2)
In addition to standard, full-flow trims we also offer flow-restricted
plugs for low-flow control requirements. Flow rates vary from low-flow,
lower flow to extra-low flow.
Easy maintenance
Different types of valve trims with standard design are easily and
quickly interchangeable. The valve body can remain in the pipeline
when disassembling the valve trims.
Bonnet styles
There are different bonnet types available: Standard B0, Extension B1,
Extension B2 and Bellow Type B3, particularly designed for different
process temperatures and leakage requirements.
Specifications
Table 1. Technical Specifications
With steel and stainless Flange connection: Class 150, 300 & 600 comply with standard ASME B16.34
Maximum inlet pressure
steel valve body Screw or weld connection: Class 600 comply with standard ASME B16.34
Same as the maximum inlet pressure rating, other restrictions in Table 16, Table 17
Maximum pressure drop Maximum allowable pressure for valve trim in Table 16, Table 17
Maximum allowable pressure for gasket in Table 18
Flange connection: 1~4 inch with RF (Raise-face) Flange, Class 150, 300 & 600 comply
with standard ASME B16.5 with RTJ (Ring-Joint Flange), Class 150, 300 & 600 comply
with standard ASME B16.5
Process connection With steel and stainless
and size steel valve body Screw connection: 1/2 ~ 2 inch, comply with standard ASME B16.11
SW (socket weld): 1/2 ~ 2 inch, comply with standard ASME B16.11
BW (butt weld): 1~4 inch, comply with standard ASME B16.34
Valve trim material
Valve trim has different material designs for plug, stem, seat ring, retainer, etc. Detail in Table 10, Table 11 & Table 12
design
PTFE, Graphite, Duplex packing
Packing
Detail in description of packing system, Table 3 and Figure 4, Figure 5, Figure 6, Figure 7 & Figure 8
Quick opening
Flow characteristics Linear
Equal-percentage
Metal Seat: standard shutoff Class IV, Class V available, comply with standard ANSI/FCI 70-2 & IEC60534-4, detail in
Valve shutoff Table 5
classification
PTFE composition seat: Class VI, comply with standard ANSI/FCI 70-2 & IEC60534-4, detail in Table 6
Flow coefficient Flow coefficient in Table 19
Valve body temperature-
Valve body temperature-pressure range in Table 21, Table 22 & Table 23
pressure range
Maximum pressure Valve body/trim: temperature limitation in Table 13 & Table 14
temperature limitation Other parts: temperature limitation for construction materials in Table 15
WCC steel, CF8 (304 stainless steel), CF8M (316 stainless steel), WC9 (chrome-
Valve body and bonnet
molybdenum steel), other materials please specify
Construction materials
Valve trims Detail in valve trim design Table 10, Table 11 & Table 12
Other parts Detail in construction materials and temperature limits Table 15
Port diameters and
Detail of port diameters and valve plug travel in Table 20
valve plug travel
Yoke boss & valve stem
Detail of yoke boss and valve stem diameter in Table 20
diameter
Standard bonnet
Bonnet styles Extension I & Extension II Detail in bonnet selection guides Table 7, Table 8, Table 9 and Figure 11 & Figure 12
Bellow type bonnet
NACE application Comply with NACE standard MR0175, material requirement in Table 12
Dimension and weight Dimension and weight in Table 24, Table 25, Table 26 & Figure 14, Figure 15.
Low flow control Detail in description of micro-flow trim design in Table 4 & Figure 9
3
Master Flo Valve Inc. | MFCV001
Packing System
The long-term, consistent sealing performance of the packing system We offer two different packing materials: PTFE, which is selected for
is achieved by the unique design of the packing construction and high temperatures below 232°C (450°F) and graphite which is selected for
performance packing material. The MFCV001 valve packing system temperatures above 232°C (450°F).
ensures excellent sealing and load force transfer. Live-loading spring
design offers stable load to the packing material during its lifetime.
The long-life and reliability of these systems also reduce maintenance
costs and downtime.
The packing system can be replaced on-site with the control valve
remaining in the pipeline. The packing package has all the spare parts
needed for in-line repair or replacement.
The Bellows Seal System offers the strictest seal design. This helps to
seal the process to conserve valuable process fluid. It also protects the
environment by preventing gas and fluid from escaping. Figure 3. Bonnet Construction Drawing
PTFE V-Ring V-Type Single/Double PTFE, Graphite Composite, ES-Type & HS-Type,and Bellows Seal System
Packing Material PTFE Graphite
3/8” (9.5mm) 1” (25.4mm)
Available Stem
1/2” (12.7mm) 1-1/4” (31.8mm)
Diameter
3/4” (19.1mm)
Temperature & Pressure For details see Figure 4 & 5
Packing Ring and Lower Wiper PTFE V-Ring
PTFE Packing System
Male and Female Adaptor Rings Carbon-filled PTFE V-Ring
Graphite Packing System Graphite Ring
Anti-Extrusion Washer Filled PTFE (Not required for Graphite packing system)
Lantern Ring S31600 (316 Stainless Steel)(Not required for Graphite packing system)
Construction Material
Packing Box Flange S31600(316 Stainless Steel)
Spring 17-7PH Stainless Steel or Inconel Alloy
Packing Follower S31600 (316 Stainless Steel),Carbon-Filled PTFE
Packing Box Studs Strain-Hardened 316 Stainless Steel
Packing Box Nuts 316 Stainless Steel SA194 Level 8M
4
MFCV001 | Master Flo Valve Inc.
When selecting a packing system design, seal capability, friction, lifetime, and
requirements for temperature and pressure, need to be taken into consideration.
Temperature, °C
-46 -18 10 37 65 93 121 149 176 204 232 260 288 315
1600 110
1400 97
ES Graphite
HS Graphite
1200 83
Pressure, Bar
Pressure, PSI
1000 69
Figure 4. Pressure-Temperature Chart for Packing
800 55
Materials in Environmental Applications ES Duplex
ES PTFE
600 41
400 28
0 0
-50 0 50 100 150 200 250 300 350 400 450 500 550 600
Temperature, °F
Temperature, °C
-240 -184 -129 -73 -18 38 94 149 205 260 316 371 427 483 538 594 649
4500 310
3500 241
3000 207
Pressure, Bar
Pressure, PSI
1500 103
1000 69
500 34
0 0
-400 -300 -200 -100 0 100 200 300 400 500 600 700 800 900 1000 1100 1200
Temperature, °F
5
Master Flo Valve Inc. | MFCV001
6
MFCV001 | Master Flo Valve Inc.
7
Master Flo Valve Inc. | MFCV001
8
MFCV001 | Master Flo Valve Inc.
Trim Style Flow Range Flow Characteristic Valve Size ( Inches) Available CV
FLOW-A FLOW-B
FLOW-A is an unbalanced trim with a linear plug characteristic. This is a FLOW-B is used for flow range between Flow-A and Flow-C with equal
very rugged, durable trim and is available in limited materials, such as percentage characteristic for lower flow control. Typical applications
R30006/CoCr-A. FLOW A is used for ultra-low-flow applications. Flow are flow up (with some flow down) with port diameters as small as
direction for this trim is flow up, with 0.187 inch port diameter, and 0.25 inches. Standard trim material is R30006/CoCr-A and S44004.
0.75 inch travel.
FLOW-C
9
Master Flo Valve Inc. | MFCV001
Shutoff Capability
MFCV001 Control Valve shutoff capability is in compliance with standard ANSI/FCI70-2
and IEC60534-4. When using a metal seat, the shutoff Class is IV, with an option of Class V or
Class VI. When using PTFE composite seat, VI Class is available.
S31600/CoCr-A
S31600
S31600 (alloy 6) seat Not a limiting
w/radiused seat
(316SST) w/standard factor
(special design)
Trim 300 lbs/ beveled seat
Temperature ≤4 Metal linear
Limit inch S31600/CoCr-A
S31600
(alloy 6) guided Not a limiting
S31600 w/radiused seat
w/standard factor
(special design)
beveled seat
Temperature, °C
1000 69
800 60
600
40
400
1 20
200
0
0 50 100 150 200 250 300 350 400
Temperature, °F
Note: Maximum temperature for PTFE disk in design MFCV001 valves with all metal trim parts except N05500 (K-Monel) and alloy 6B. Maximum
temperature for design PTFE disk with alloy 6B trim parts is 177 °C (350 °F) and with 1 N05500 trim parts is 204 °C (400 °F).
10
MFCV001 | Master Flo Valve Inc.
Bonnet Selection
MFCV001 Valve has 4 Bonnet Styles:
Standard Bonnet B0, Extension Bonnet B1, Extension Bonnet B2 and Bellows Seal Bonnet B3.
Standard for all valve size through 2, 3, 4 PTFE/Composition -18 to 232 0 to 450
inch with 2-13/16 yoke boss diameter
Optional for all valve size through 2, 3, 4 -18 to maximum shown in 0 to maximum shown in
Graphite ribbon/filament
inch with 3-9/16 yoke boss diameter table 15 table 15
PTFE V-ring
B1 Extension Bonnet -46 to 427 -50 to 800
PTFE/composition
Optional for all valve size. Please check with
yoke boss diameter -46 to maximum shown in -50 to maximum shown in
Graphite ribbon/filament
table 15 table 15
PTFE V-ring
B2 Extension Bonnet -101 to 427 -150 to 800
PTFE/composition
Optional for all valve size. Please check with
yoke boss diameter -101 to maximum shown in -150 to maximum shown in
Graphite ribbon/filament
table 15 table 15
PTFE For exceptional stem sealing capabilities. See details about bel-
B3 Bellows Seal Bonnet
Graphite lows seal bonnets for pressure/temperature ratings.
These in-body process temperatures assume an outside, ambient temperature of 70 °F (21 °C). When using any packing at low process
temperatures, a cast extension bonnet may have to be used to prevent packing damage which could result from the formation of valve stem frost.
11
Master Flo Valve Inc. | MFCV001
Features:
Leakage: Tested to 1X10-6 cubic cm/s of Helium.
Body Size Yoke Boss Diameter Stem Thread Diameter (1) Valve Stem Diameter
(Inches) mm Inches mm Inches mm Inches
1/2, 3/4, 1 & 1-1/2 54 2-1/8 9.5 3/8 12.7 1/2
2 71 2-13/16 12.7 1/2 12.7 1/2
3&4 71 2-13/16 12.7 1/2 25.4 1
1. This is the diameter at the actuator stem connector.
12
MFCV001 | Master Flo Valve Inc.
Table 11.Typical Combinations of Metal Trim Parts for Flow Valve Plugs A & Flow B (These Constructions Do Not Use Guide Bushing)
A55 S31600 w/ CoC-A seat R30006 tip S31600 S31600 w/CoCr-A seat CF8M ---
A56 S31600 w/CoC-A seat R30006 tip S31600 S31600 CF8M S31600
CB7Cu-1
A57 S31600 w/CoC-A seat* R30006 tip S31600 S31600 w/CoCr-A seat ---
(17-4PH SST)
CB7Cu-1
A58 S31600 w/CoC-A seat R30006 tip S31600 S31600 w/CoCr-A seat & bore ---
(17-4PH SST)
1. FLOW-B construction 2. Standard trim for Flow-A&Flow-B constructions in WCB, CF8M, and WC9 valve bodies.
Table 12.Typiclal Combinations of Metal Trim Parts for Equal Percentage (Including Flow-C), Linear, and Quick Opening Valve Plugs for
Compliance with NACE MR0175(Sour Service) Specifications
13
Master Flo Valve Inc. | MFCV001
1/2, 3/4, 1, B87, A27 -198 260 -325 500 A54 -198 593 -325 1100
or 1-1/2 B86, A28 -198 260 (1)
-325 500 (1)
--- --- --- --- ---
B85, A29 -198 260(1) -325 500(1) A56 -198 149 -325 300
A37 -101 371 -150 700 A58 -101 371 -150 700
CF8M A39 -101 371(1) -150 700(1) A57 -101 149 -150 300
(316 stainless
steel) A01 -29 288 -20 550 A51 -29 288 -20 550
A04 -101 299(1) -150 570(1) A52 -101 149 -150 300
A20 -198 316 -325 600 A53 -198 316 -325 600
B87, A27 -198 260 -325 500 A54 -198 593 -325 1100
2
B86, A28 -198 260(1) -325 500(1) --- --- --- --- ---
B85, A29 -198 260(1) -325 500(1) A56 -198 149 -325 300
A37 -101 299 -150 570 A58 -101 299 -150 570
A39 -101 299(1) -150 570(1) A57 -101 149 -150 300
14
MFCV001 | Master Flo Valve Inc.
1/2, 3/4, 1, B87, A27 -29 260 -20 500 A54 -29 565 -20 1050(2)
1-1/2, or 2 B86, A28 -29 260(1) -20 500(1) --- --- --- --- ---
B85, A29 -29 260(1) -20 500(1) A56 -29 149 -20 300
A37 -29 427 -20 800 A58 -29 427 -20 800(1)
A39 -29 427(1) -20 800(1) A57 -29 149 -20 300
A01 -29 427 -20 800 --- --- --- --- ---
Temperature Limits
Part Material
°C °F
N04400/PTFE (Optional for trim A20 & A53) -73 149 -100 300
Spiral wound gaskets
N06600 (Inconel)/Graphite (FGM) standard -198 593(4) -324 1100(4)
S31600
Shim These materials are not limiting factors
N04400 (Standard for trim A20 & A53)
16
MFCV001 | Master Flo Valve Inc.
Table 17. Maximum Allowable Pressure Drops per Trim Code for Equal Percentage (including Flow-C), Linear, and Quick Opening Valve Plugs
Shutoff Flowing
Trim Seat Ring Pressure Pressure
Valve Plug Valve Stem Seat Ring Guide Bushing Drop Drop
Code Retainer
Bar Psig Bar Psig
S41600 (416)
S31600 (316 S41600 CB7Cu-1 (17-4PH S17400 (17-PH
A01 Stainless Steel 103 1500 103 1500
Stainless Steel) Hardened Stainless Steel) Stainless Steel)
Hardened
S31600
A04 (316 Stainless S31600 S31600 CB7U-1 S17400 21 300 103 1500
Steel)
A20 N05500 (k-Monel) N05500 N05500 M35-1 (Monel) N05500 55 800 103 1500
S31600 W/CoCr-A
B87, S31600 CF8M (316
seat (Alloy6) Seat & S31600 Alloy 6B 103 1500 103 1500
A28 w/CoCr-A seat Stainless Steel)
Guide
B85,
S31600 S31600 S31600 CF8M Alloy 6B 21 300 103 1500
A29
S31600 S31600
A39 S31600 CB7U-1 S17400 103 1500 103 1500
w/CoCr-A Seat w/CoCr-A Seat
17
Master Flo Valve Inc. | MFCV001
BAR (2, 3)
Valve Body Size (Inches)
Temp 1/2, 3/4, & 1 1-1/2 2 3 4
°C Port Diameter (mm)
4.8 & 4.8 & 4.8 &
9.5 12.7 19.1 25.4 9.5 12.7 19.1 25.4 38.1 9.5 12.7 19.1 25.4 50.8 50.8 76.2 50.8 101.6
6.4 6.4 6.4
-253 to 38 67.6 68.3 69 72.4 76.5 58.6 59.0 59.3 61.3 63.4 72.4 52.4 52.8 53.1 54.5 55.8 70.3 5.2 70.3 49.0 73.8
93 56.5 57.2 57.2 60.0 64.1 49.0 49.3 49.6 51.0 53.1 60.0 43.4 43.8 44.1 45.5 46.9 58.6 46.2 58.6 40.7 61.4
149 47.6 48.3 49.0 51.0 53.8 41.4 41.8 42.1 43.4 44.8 51.0 37.2 37.2 37.2 37.9 39.3 49.6 38.6 49.6 34.5 51.7
204 43.4 43.8 44.1 46.2 49.0 37.9 37.9 37.9 39.3 40.7 46.2 33.8 33.8 33.8 34.5 35.9 44.8 35.2 45.5 31.0 46.9
232 42.1 42.6 43.1 44.8 47 36.5 36.7 36.9 38.3 39.6 44.8 32.8 32.8 32.8 33.4 34.8 43.4 34.1 44.1 30.3 45.5
-253 to 38 94.5 96.2 97.9 104.1 114 77.9 79.0 80.0 82.7 87.6 105 67.6 68.2 68.7 70.3 73.1 101 69.6 97.2 65.5 114
93 89.6 91.4 93.1 98.6 108 73.8 74.5 75.2 78.6 82.7 99.3 63.4 64.1 64.8 66.9 69.6 95.8 66.2 92.4 62.1 108
149 85.5 87.2 88.9 94.5 103 70.3 71.4 72.4 75.2 79.3 94.5 60.7 61.4 62.1 63.4 66.2 91.7 62.7 88.3 58.6 103
204 81.4 83.1 84.8 89.6 98.6 66.9 68.0 69.0 71.0 75.2 90.3 57.9 58.3 58.6 60.7 62.7 86.9 60.0 83.4 55.8 97.9
260 78.6 80.4 82.1 86.9 95.2 64.8 65.5 66.2 69.0 73.1 87.6 55.8 56.5 57.2 58.6 61.4 84.1 57.9 81.4 54.5 94.5
316 76.5 77.9 79.3 84.1 92.4 62.7 63.4 64.1 66.9 71.0 84.8 54.5 54.9 55.2 56.5 59.3 81.4 56.5 78.6 52.4 91.7
371 73.8 75.2 76.5 81.4 88.9 60.7 61.4 62.1 64.8 68.3 81.4 52.4 52.8 53.1 55.2 57.2 78.6 54.5 75.8 51.0 88.3
427 71.0 72.4 73.8 78.6 86.2 58.6 59.3 60.0 62.1 66.2 78.6 50.3 51.0 51.7 53.1 55.2 75.8 52.4 73.1 49.0 85.5
psi (2, 3)
Temp Port Diameter (Inches)
°F
3/16 3/16 3/16
3/8 1/2 3/4 1 3/8 1/2 3/4 1 1-1/2 3/8 1/2 3/4 1 2 2 3 2 4
& 1/4 & 1/4 & 1/4
N04400 valve (Monel)/Composition Spiral Wound Gasket (Gasket Set) (4)
-425 to 100 980 990 1000 1050 1110 850 855 860 890 920 1050 760 765 770 790 810 1020 800 1020 710 1070
200 820 830 840 870 930 710 715 720 740 770 870 630 635 640 660 680 850 670 850 590 890
300 690 700 710 740 780 600 605 610 630 650 740 540 540 540 550 570 720 560 720 500 750
400 630 635 640 670 710 550 550 550 570 590 670 450 490 490 500 520 650 570 650 450 680
500 610 618 625 650 690 530 535 535 555 575 650 475 475 475 485 505 630 495 640 440 660
N06600 (Inconel)/Graphite Spiral Wound Gasket (Gasket Set 2) or N04400Monel)/PTFE Spiral Wound Gasket (Gasket Set 3) (5)
-425 to 100 1370 1395 1420 1510 1660 1130 1145 1160 1200 1270 1520 980 985 990 1020 1060 1470 1010 1410 950 1650
200 1300 1325 1350 1430 1570 1070 1080 1090 1140 1200 1440 920 930 940 970 1010 1390 960 1340 900 1560
300 1240 1265 1290 1370 1500 1020 1035 1050 1090 1150 1370 880 890 900 920 960 1330 910 1280 850 1490
400 1180 1205 1230 1300 1430 970 985 1000 1030 1090 1310 840 895 850 880 910 1260 870 1210 810 1420
500 1140 1165 1190 1260 1380 940 950 960 1000 1060 1270 810 820 830 850 890 1220 840 1180 790 1370
600 1110 1130 1150 1220 1340 910 920 930 970 1030 1230 790 795 800 820 860 1180 820 1140 760 1330
700 1070 1090 1110 1180 1290 880 890 900 940 990 1180 760 765 770 800 830 1140 790 1100 740 1280
800 1030 1050 1070 1140 1250 850 860 870 900 960 1140 730 740 750 700 800 1100 760 1060 710 1240
1. MFCV001 valve should not be used in flow down service including on-off applications.
2. Pressure drop cannot exceed maximum inlet pressure.
3. The trim may be further limited by maximum pressure drops listed in Table 16 and 17.
4. Pressure drops at intermediate temperatures may be interpolated.
5. Maximum temperature capability of PTFE-coated N04400 (Monel) gaskets as set in gasket set 3 is 49°C (300°F).
18
MFCV001 | Master Flo Valve Inc.
Flow Coefficient
Table 19. Flow Coefficient
Quick-Opening
Valve Valve Valve Valve Opening-Percent of Total Travel
Body Port Plug
Coefficient FL
Size Size Travel 10 20 30 40 50 60 70 80 90 100
(Inches) (Inches) (Inches)
1/2 1 3/4 1.76 3.29 4.29 4.44 4.44 4.44 4.44 4.44 4.44 4.44 .69
3/4 1 3/4 3.85 7.19 9.40 9.72 9.72 9.72 9.72 9.72 9.72 9.72 .78
1 1 3/4 4.39 10.3 14.0 15.5 16.2 16.8 16.8 16.8 16.9 16.9 .88
1-1/2 1-1/2 3/4 5.64 11.9 20.6 27.4 30.5 33.4 33.7 33.7 34.1 34.2 .93
2 2 1-1/8 13.0 30.1 44.3 52.5 56.4 58.4 58.5 58.5 58.6 58.6 .89
CV 3 3 1-1/8 30.8 65.1 92.4 110 118 126 128 128 129 129 .82
4 4 2 50.8 116 159 185 201 219 222 222 223 223 .78
1-1/2 1 3/4 4.17 8.94 14.6 17.4 18.3 18.9 19 19.0 19.1 19.4 .81
2 1 3/4 4.35 9.79 14.9 16.6 17.3 17.5 17.6 17.6 17.17 17.9 .74
3 2 1-1/8 9.99 27.6 44.9 61.6 71.9 82.1 86.2 86.2 87.5 88.4 .91
4 2 1-1/8 13.5 32.3 52.2 66.2 74.4 85.0 85.8 85.8 86.3 86.7 .72
Linear
1 1 3/4 2.12 3.87 52.9 6.56 8.2 11.1 12.1 12.1 13.0 13.6 .93
1-1/2 1-1/2 3/4 3.99 7.53 11.1 14.8 18.7 25.8 29.2 29.2 31.2 31.9 .93
2 2 1-1/8 6.08 11.93 17.9 24.07 30.9 42.84 49.57 49 52.02 52.43 .90
3 3 1-1/2 15.4 29.6 43.4 58.3 71.8 93.8 103 57 198.6 209 .84
CV 4 4 2 21.3 39.7 57.5 75.8 100.4 157 179.9 103 198.6 209.0 .80
1-1/2 1 3/4 1.96 3.42 4.94 6.11 7.8 10.9 13 179.9 15.1 16.7 .93
2 1 3/4 1.88 3.41 4.94 6.49 8.06 11.23 12.79 13 14.35 15.7 .89
3 2 1-1/8 6.59 13.3 20.7 28.1 36 55.6 67.5 12.79 76.2 80.4 .89
4 2 1-1/8 6.16 12.8 20.0 27.8 36.1 58.5 67.5 67.5 78.8 86.8 .81
Equal Percentage
1 1 3/4 .79 1.25 1.80 2.53 3.63 7.59 10.7 10.7 12.7 13.2 .93
1-1/2 1-1/2 3/4 .795 1.23 1.91 2.96 4.30 9.84 16.4 16.4 22.2 28.1 .94
2 2 1-1/8 1.65 2.61 4.30 6.62 11.1 32.8 44.7 44.7 50.0 53.8 .91
3 3 1-1/2 3.11 5.77 9.12 13.7 21.7 60.4 86.4 86.4 104 114 .84
CV 4 4 2 4.90 8.19 13.5 20.1 31.2 96.7 140 140 170 190 .81
1-1/2 1 3/4 .77 1.23 1.78 2.58 3.67 8.30 12 12 15.1 17.3 .95
2 1 3/4 1.02 1.50 2.05 2.78 3.90 8.16 11.8 11.8 14.5 15.9 .85
3 2 1-1/8 2.11 3.11 4.58 6.76 10.7 34.3 48.3 48.3 61.5 71.5 .85
4 2 1-1/8 1.96 3.05 4.43 6.98 11.9 36.7 50.9 50.9 61.8 72.7 .84
Flow C - Equal Percentage
1/2-2 1/4 3/4 .088 .124 .175 .236 .327 .641 .881 .881 1.22 1.52 .77
3/8 3/4 .134 .202 .313 .448 .613 1.27 1.77 1.77 2.47 3.00 .87
1/2
1/2 3/4 .193 .324 .496 .737 1.07 2.13 2.93 2.93 3.89 4.52 .89
3/8 3/4 .131 .205 .312 .446 .618 1.28 1.80 1.80 2.45 3.03 .87
3/4 1/2 3/4 .190 .318 .486 .732 1.07 2.15 3.07 3.07 4.20 5.06 .88
3/4 3/4 .373 .617 .948 1.44 2.14 4.43 6.41 6.14 7.58 8.35 .76
CV
3/8 3/4 .129 .199 .308 .448 .620 1.29 1.80 1.80 2.43 3.07 .80
1 1/2 3/4 .189 .319 .492 .735 1.08 2.12 2.99 2.99 4.17 4.91 .86
3/4 3/4 .374 .622 .965 1.47 2.17 4.57 6.52 6.52 8.17 8.84 .95
1-1/2 3/8 3/4 .121 .190 .302 .435 .600 1.26 1.80 1.80 2.56 3.20 .71
And 1/2 3/4 .199 .323 .503 .735 1.07 2.14 3.08 3.08 4.36 5.18 .82
2 3/4 3/4 .434 .683 1.00 1.49 2.21 4.16 6.73 6.73 8.88 10.2 .85
Flow B - Equal Percentage
1/4 - 1
1/2 - 2 3/4 0.0385 0.0455 0.056 0.0719 0.0942 0.124 0.162 0.212 0.278 0.354 0.87
Flute
CV
1/4 - 3
1/2 - 2 3/4 0.0562 0.0725 0.101 0.146 0.216 0.312 0.433 0.588 0.802 1.07 0.9
Flute
Flow A - Equal Percentage
3/16 - 1
1/2 - 2 Deg 55 3/4 0.015 0.02 0.024 0.028 0.034 0.041 0.048 0.056 0.066 0.075 0.89
Min
CV
3/16 - 3
1/2 - 2 Deg 25 3/4 0.016 0.026 0.038 0.052 0.07 0.088 0.107 0.127 0.153 0.181 0.84
Min
19
Master Flo Valve Inc. | MFCV001
Port Diameter (mm) Max Valve Valve Stem and Yoke Boss Diameters (mm)
Valve Body
Quick Plug Travel Standard Optional
(Inches) Equal Percentage(1) Linear
Opening (mm) Stem Yoke Boss Stem Yoke Boss
1/2 or 3/4 4.8(2) 6.4(3) , 9.5, 12.7, 19.1, 25.4 25.4 ---
1 4.8(2) 6.4(3) , 9.5, 12.7, 19.1, 25.4 25.4 25.4 19 9.5 54 12.7 71
1-1/2 4.8 6.4 , 9.5, 12.7, 19.1, 25.4, 38.1
(2) (3)
38.1 38.1
2 4.8(2) 6.4(3) , 9.5, 12.7, 19.1, 25.4, 50.8 50.8 50.8 29
3 50.8, 76.2 76.2 76.2 38 12.7 71 19.1 90
4 50.8, 101.6 101.6 101.6 51
Inches
1/2 or 3/4 3/16(2), 1/4(3) , 3/8, 1/2, 3/4, 1 1 ---
1 3/16 , 1/4 , 3/8, 1/2, 3/4, 1
(2) (3)
1 1 3/4 3/8 2-1/8 1/2 2-13/16
1-1/2 3/16 , 1/4 , 3/8,1/2, 3/4, 1, 1-1/2
(2) (3)
1-1/2 1-1/2
2 3/16(2), 1/4(3) , 3/8,1/2, 3/4, 1, 2 2 2 1-1/8
3 2, 3 3 3 1-1/2 1/2 2-13/16 3/4 3-9/16
4 2, 4 4 4 2
1. 1/4 through 3/4-inch (6.4 through 19.1mm) port diameters use Flow-C valve.
2. Plug. FLOW-A valve plug.
3. Also available in Flow-B valve plug.
Operating Temp °C LGB WCC WC9 CF8 or 304 CF8M or 316 CF3M or 316L
-29 to 38 1.8 2.0 2.0 1.9 1.9 1.9
93 1.7 1.8 1.8 1.6 1.6 1.6
149 1.6 1.6 1.6 1.4 1.5 1.5
204 1.4 1.4 1.4 1.3 1.3 1.3
260 1.2 1.2 1.2 1.2 1.2 1.2
316 1.0 1.0 1.0 1.0 1.0 1.0
343 0.9 0.9 0.9 0.9 0.9 0.9
371 --- 0.8 0.8 0.8 0.8 0.8
399 --- 0.7 0.7 0.7 0.7 0.7
427 --- 0.6 0.6 0.6 0.6 0.6
454 --- --- 0.4 0.4 0.4 0.4
482 --- --- 0.3 0.3 0.3 ---
510 --- --- 0.2 0.2 0.2 ---
538 --- --- 0.1 0.1 0.1 ---
565 --- --- 0.1 0.1 0.1 ---
593 --- --- 0.1 0.1 0.1 ---
20
MFCV001 | Master Flo Valve Inc.
Operating Temp oC LGB WCC WC9 CF8 or 304 CF8M or 316 CF3M or 316L
-29 to 38 4.8 5.2 5.2 5.0 5.0 5.0
93 4.5 5.2 5.2 4.2 4.3 4.3
149 4.4 5.0 5.0 3.7 3.9 3.9
204 4.3 4.9 4.9 3.2 3.6 3.6
260 4.0 4.6 4.6 3.0 3.3 3.3
316 3.7 4.2 4.2 2.9 3.1 3.1
343 3.6 4.1 4.1 2.8 3.1 3.1
371 --- 3.9 3.9 2.8 3.0 3.0
399 --- 3.5 3.7 2.8 2.9 2.9
427 --- 2.5 3.5 2.7 2.9 2.9
454 --- --- 3.3 2.7 2.9 2.9
482 --- --- 3.1 2.7 2.9 ---
510 --- --- 2.6 2.6 2.7 ---
538 --- --- 1.8 2.2 2.4 ---
565 --- --- 1.2 2.1 2.4 ---
593 --- --- --- 1.8 2.1 ---
21
Master Flo Valve Inc. | MFCV001
A Dimension
Valve Scrd 125FF 250RF BW DIN DIN
150 300 600 G
Size or or or or PN PN
RTJ RTJ RTJ (max)
(Inches) SWE 150RF 600RF 60RF 16-40 63-100
(1) (3)
mm
1/2 or 3/4 165 --- --- ---
--- --- --- --- --- 55
1 210 184 197 197
210 210 210 160 230 60
1-1/2 251 222 235 235
248 251 251 200 260 71
2 286 254 267 267
282 286 289 230 300 78 D
3 --- 298 311 317
333 337 340 310 380 97
4 --- 353 365 368
384 394 397 350 430 129
Inches
1/2 or 3/4 650 --- --- --- --- --- --- 2.12
1 8.25 7.25 7.25 7.75 8.25 8.25 8.25 2.38
See See
1-1/2 9.88 8.75 8.75 9.25 9.75 9.88 9.88 2.81 G
Metric Metric
2 11.25 10.00 10.00 10.50 11.25 11.25 11.38 3.06
Above Above
3 --- 11.75 11.75 12.50 13.25 13.25 13.38 3.81 B
4 --- 13.88 13.88 14.50 15.50 15.50 15.62 5.06 A
End connection style abbreviations: BW-Butt weld, FF-Flat Faced, Scrd-
Screwed, SW-Socket weld, RF-Raised Face, RTJ-Ring Type Joint. Figure 15. Bellow Seals Bonnet Dimension
Table 25. Size B3 for Bellows Seal Bonnet B3 Table 26. Approximate Weight
22
MFCV001 | Master Flo Valve Inc.
Ordering Information
Table 27. Control Valve Ordering Table
Control Valve Design Worksheet ( must be filled when selecting a control valve)
1 Control Location
7 Flow
Operating
8 Upstream Pressure P1
Conditions
9 Downstream Pressure P2
11 Temperature T
12 Density *
13 Stream Pressure Pv
14 Critical Pressure Pc
15 Dynamic Viscosity V
24 masterflo.com