Professional Documents
Culture Documents
Represented Countries (17): Australia, Botswana, Brazil, Canada, Chile, Colombia, Ecuador, Finland, France,
Germany, Mexico, Peru, South Africa, Spain. Sweden, UK and USA
(A09) Improving Buenavista del Cobre Flotation Performance with Outotec TankCell® e630 Technology
Rodrigo Grau, Tatu Miettinen, Outotec, Finland; José Romero, Outotec, Mexico; Gregorio Muro and Juan Tapia,
Buenavista del Cobre, Grupo México
(A61) Geological Contributions to a Geomet Programme in Brazil: Cuiaba’s AngloGold Ashanti Mine
Luiz Da Costa, Fernando Peixoto de Villanova and Reuber Cota, AngloGold Ashanti, Brazil
(A70) Pilot Scale Assessment of Stage Flotation Reactor as Part of SGO Project´s Cu-Mo Separation Circuit
Victor Iriarte, Fernanda Orellana, Leonardo Flores and Cristian Palacios, Spence Growth Option Project, BHP, Chile
(A02) Comminution Circuit Optimization with Limited Process and Test Work Data
Rohan Bose and Maruf Hasan, Donhand, Australia
(A51) Exploring the Impact of Other Parameters on Grinding Media Wear - the Minas Rio Case
Peter Radziszewski, Sudarshan Martins, Metso, Canada; Roberto Panzera, Metso, Brazil; Jens Lichter, Anglo
American, South Africa; Jonathan Silva and Lorene Fonseca; Minas Rio, Anglo American, Brazil
(A64) Data Fusion: A Novel Concept for Creation of Enhanced Characterization of Minerals
Daniel Shiley and Brian Curtiss, Malvern Panalytical, USA
(A71) Upgrading Mo Concentrate Grade: Ferric Leaching Potential on Mo Concentrate Obtained from Pilot & Bench
Scale Testwork
Leonardo Flores, Fernanda Orellana and Víctor Iriarte, Spence Growth Option Project, BHP, Chile
(A17) Increase in the Feed Rate of a Phosphate Processing Plant from a Change in Process Route in the Grinding
Circuit
Augusto Rezende, New Steel, Brazil; Frederic Braga , Jair de Souza, Julio da Silva, Otávio Pedron and Wagton Silveira,
Mosaic Fertilizantes, Brazil
(A26) Using Artificial Intelligence & 3D Imaging for Real-time Rock Fragmentation Analysis on Conveyor Belts
Jodie Davies, Motion Metrics International, Canada
(A33) Correction of Bond Ball Mill Work Index Test for Closing Mesh Sizes
Yardin Josefin, N.B. Keevil Institute of Mining Engineering, University of British Columbia, Canada; and Alex Doll,
SAGMILLING, Canada
(A37) Ball Type Effect on Grinding Efficiency
Dante Garcia, Levi Guzman and Cesar Poma, Moly-Cop, Peru
(A11) Role of Dispersants in the Interactions Between Clay Minerals and Copper Sulphides in Seawater
Andrés Ramírez, CRHIAM, Universidad de Concepción; Leopoldo Gutiérrez, Department of Metallurgical Engineering,
Universidad de Concepción, Chile; and Janusz Laskowski, N.B. Keevil Institute of Mining Engineering, University of
British Columbia, Canada
(A12) Gold, Silver and Mercury Recovery of Small Mining Tailing by Froth Flotation
Moisés Bustamante, Julián Osorio and Francisco Patiño, Universidad de Colombia
(A15) Evaluation of the Performance of an Industrial Rougher Flotation Bank of a Scheelite Ore Through
Automated Mineralogy
Nathalie Kupka and Martin Rudolph, Helmholtz Institute Freiberg for Resource Technology, Germany
(A24) Froth Flotation of Low Grade Iron Ore Using Fatty Acid
R. Rojas, A. Pereira, M. Torem, M. Cortes, A. Merma, Department of Chemical and Materials Engineering, Pontifícia
Universidade Católica do Rio de Janeiro, Brazil; A. Lamon, Hidroveg Chemical Industries, Brazil
(A25) Iron Ore Direct Flotation Using a Crude Biosurfactant Extracted from a Rhodococcus Opacus Strain
A.R.M. Pereira, R.H. Rojas, M.L. Torem, M. Cortes and A.G. Merma, Department of Chemical and Materials
Engineering, Pontifícia Universidade Católica do Rio de Janeiro, Brazil
(A28) Evaluation of Valuable Minerals Along an Industrial Rougher Circuit Using QEMSCAN Analysis
Paulina Vallejos, Juan Yianatos, Centre for Mining Industry, Universidad Técnica Federico Santa María, Chile; and M.
Morales, Minera Los Pelambres, Chile
(A32) Flotation Optimization with the Use of Froth and Bubbles Characterization Methodologies
Dante Garcia, Levi Guzman and Patricio Velarde, Moly-Cop, Peru
(A31) Green Chemistry in Froth Flotation: Evaluating the Use of Environmental-Friendly Agents
Lorenzo Reyes, Eduardo Vyhmeister, Universidad Central de Chile; Pablo Higueras, Universidad de Castilla, Spain;
Carlos Fúnez, Centro Nacional de Hidrógeno, Spain; Alex Godoy, Universidad del Desarrollo, Chile; Leopoldo
Gutiérrez, Univesidad de Concepción, Chile; and Ronaldo Herrera, Universidad de Sonora, Mexico
(A41) Application of the Taguchi Method to Optimize Parameters in a Rougher Circuit of Copper and
Molybdenum Flotation
Alejandro Mayta, Department of Mathematics, Universidad Nacional de San Agustín, Peru; and Miguel Mayta,
Southern Peru Copper, Toquepala, Peru
(A42) Three Phase Testing of a Novel Real Time Gas Holdup Sensor for Industrial Flotation Machines
Alejandro Mayta, Department of Mathematics, Universidad Nacional de San Agustín, Peru; and Miguel Mayta,
Southern Peru Copper, Toquepala, Peru
(A46) Phase-Exclusion Cells: A Primary Sensing Component for In-Situ Measurement of Gas Holdup
César Gómez, Department of Mining and Materials Engineering, McGill University, Canada; and Miguel Maldonado,
Department of Metallurgical Engineering, Universidad de Santiago de Chile
(A49) Application of Continuous Elemental Analysis and Sampling Zones for Flotation Plants
Tom Strombotne, Thermo Fisher Scientific, USA
(A53) Alternative Depressants for the Reverse Cationic Flotation of Iron Ores
Carlos Veloso, ArcelorMittal; Université de Lorraine, France; Levi Filippov, Inna Filippova, Université de Lorraine,
France; and Armando Araujo, ArcelorMittal Global, France
(A43) Identification, quantification and (bio) technological extraction of valuable elements contained in tailings
from Chilean mining Industry
Ivan Restrepo, Roberto Collao, Patricio Martínez, Codelco Tech, Chile; Manuel Caraballo, Brian Townley,
Universidad de Chile; and Felipe Noriega, Minera Valle Central, Chile
(A47) The Optimum Number of Size Fractions for a Mineralogy Test: How Many Size Fractions Per Sample Are
Needed for a Mineralogy Test by MLA and QEMSCAN
Mahdi Ghobadi and Rino Bindi, Activation Laboratories, Canada
(A62) Mineralogical and Metallurgical Examination of Phyllosilicate Mineral Flotation in Chinalco Peru Mine
Johan Cobeñas Salcedo, Minera Chinalco, Peru
(A72) An Innovative Deportment Study as the Key to Assess the Potential Contribution of Lower Grade Precious
Metals in Base Metals Concentrates
Leonardo Flores, Fernanda Orellana, Víctor Iriarte and Cristian Palacios, Spence Growth Option Project, BHP, Chile
(A35) Mineralogical Characterization of Three Samples of Mines Different from Jacobina Mining Ba-Yamana Gold
Antonia Miranda, Debora Santos and Vladiclerisson Santos, Yamana Gold, Brazil
(A60) Mineralogical Characterization and Impact on the Recovery of Molybdenum in the Chuquicamata Deposit,
Antofagasta Region, Chile
Ayrton Tapia, Chuquicamata Division, Codelco; Universidad Católica del Norte, Chile; Mauricio Romero, Marlen Reyes
and Domingo Muñoz, Chuquicamata Division, Codelco, Chile
(A66) Rapid On-site and In-process Ore Characterization for Mine Optimization
Brian Curtiss and Daniel Shiley, Malvern-Panalytical, USA
Testing and Prediction of Process Performance: Crushing, Grinding, Flotation, Leaching, Sedimentation
(4 abstracts)
(A03) Improvement of Magnesite Ore Reverse Flotation by Changing the Milling Circuit
Matheus Moraes, P. Bonadia, C.F. Matos, RHI Magnesita, Brazil; and D.B. Mazzinghy, Mining Engineering
Department, Universidade Federal de Minas Gerais, Brazil
(A07) Rheological Behavior of Suspensions Generated from Sulphide Ores from Minera Centinela Under Different
Physicochemical Conditions
Andrés Ramirez, Leopoldo Gutiérrez, Department of Metallurgical Engineering, Universidad de Concepción, Chile;
Fabiola Rivadeneira and Francisco Melo, Minera Centinela, Antofagasta Minerals, Chile
(A08) Accuracy of the Bond Ball Mill Test and Its Implications
Matt Weier, Tapiwa Chenje and Bevin Wong, JKTech, Australia
(A30) Uncertainty Assessment in Particle Tracking Processing Models of Cassiterite in Complex Skarn Ores
Edgar Schach, Raimon Tolosana-Delgado, Robert Möckel, Urs Peuker, Martin Rudolph, Gerald van den Boogaart,
Helmholtz Institute Freiberg for Resource Technology, Helmholtz-Zentrum Dresden-Rossendorf, Germany; Markus
Buchmann and Thomas Leißner, Institute of Mechanical Process Engineering and Mineral Processing, Technical
University Bergakademie Freiberg, Germany
(A38) Water Consumption Spatial Modeling Based on Quantitative Mineralogy and Metallurgical Tests
Rodrigo Riquelme, Rafael Cirión and Rodrigo Glasner, GeoInnova, Chile
(A40) Quantifying the effect of Texture and Mineralogy Over the Physical Properties of Rocks Using the Single
Impact Load Cell
Pia Lois-Morales, Benjamin Bonfils and Cathy Evans, Julius Kruttschnitt Mineral Research Centre, SMI, University of
Queensland, Australia
(A54) Critical Analysis of the Current Geometallurgy Practices and New Suggestions
Jorge Menacho, De Re Metallica Ingeniería, Chile
(A67) The Role of Geometallurgical Modeling in Optimising Mine Planning, Production and Processing at Cerro
Corona
Luis Armas and Anthony Mariño, Gold Fields La Cima, Peru
(A14) How to Write off/in In-Process Metal Inventory in Compliance with AMIRA P754
Luc Lachance and Simon Gariépy, Algosys, Canada
(A39) Application of Computational Adjustments to Prepare Balances Online in a Flotation Circuit of a Concentrator
Plant
Alejandro Mayta, Department of Mathematics, Universidad Nacional de San Agustín, Peru; and Miguel Mayta,
Southern Peru Copper, Toquepala, Peru
(06) Upgrade of the Cleaner Circuit of the Mount Isa Mines Copper Concentrator
Rodrigo Araya, Glencore Technology, Canada and Virginia Lawson, Glencore Technology, Australia
(A16) Evaluation of the LCPC Test for Application in the Operations of Mining and Processing of Compact Ores:
Case Study of Sossego Mine
Petterson Barbosa, Maurício Bergerman, Escola Politécnica, Universidade de São Paulo, Brazil; and Elisabeth da
Fonseca, Vale, Brazil
Technology and software for data analysis and geometallurgy development (3 abstract)
(A20) Quantifying Mineral Liberation Using X-ray Micro-CT: What Can a 3D Analysis Tell Us?
Francisco Reyes, J. Cilliers and Stephen Neethling, Imperial College London, UK
(A45) A Methodology for the Simulation of Synthetic Geometallurgical Block Models of Porphyry Ore Bodies
Mauricio Garrido, Felipe Navarro, ALGES Laboratory, AMTC, Universidad de Chile; Exequiel Sepúlveda, School of
Mining Engineering, Universidad de Talca, Chile; and Brian Townley, Department of Geology, Universidad de Chile
ABSTRACT DISTRIBUTION
Mining Companies (23 abstracts)
Mineral Resources, Commonwealth Scientific and Industrial Research Organisation (CSIRO), Australia (1)
N.B. Keevil Institute of Mining Engineering, University of British Columbia, Canada
Universidad de Concepción, Chile (1)
Universidad Nacional de Colombia (1)
Helmholtz Institute Freiberg for Resource Technology, Germany (2)
Department of Chemical and Materials Engineering, Pontifícia Universidade Católica do Rio de Janeiro, Brazil (4)
Mineral Technology Center, Mineral Technology Center, CETEM; Brazil
Mining Engineering Department, Universidade Federal de Minas Gerais, Brazil
Escola Politécnica, Universidade de São Paulo, Brazil
Imperial College London, UK (1)
N.B. Keevil Institute of Mining Engineering, University of British Columbia, Canada
Centre for Mining Industry, Universidad Técnica Federico Santa María, Chile
Universidad Central de Chile (1)
Department of Geology and Mining Engineering, Universidad de Castilla, Spain
Centro Nacional de Hidrógeno, Spain
Universidad del Desarrollo, Chile
Department of Chemical and Metallurgical Engineering, Universidad de Sonora, Mexico
Department of Mathematics, Universidad Nacional de San Agustín, Peru
Institute of Mechanical Process Engineering and Mineral Processing, Technical University Bergakademie Freiberg,
Germany
Julius Kruttschnitt Mineral Research Centre, SMI, University of Queensland, Australia (1)
Department of Mining Engineering, Universidad de Chile
Advanced Mining Technology Center, Universidad de Chile
ALGES Laboratory, Advanced Mining Technology Center, Universidad de Chile (1)
Department of Geology, Universidad de Chile
Department of Mining and Materials Engineering, McGill University, Canada (1)
Department of Metallurgical Engineering, Universidad de Santiago de Chile
Université de Lorraine, France
Faculty of Engineering, Universidad de Medellín, Colombia
SMI, University of Queensland, Australia (2)