Professional Documents
Culture Documents
0.5 Question Bank SS Training Question
0.5 Question Bank SS Training Question
3. For checking the bottom TT density how much qty. needs to be removed from each
compartment?
Ans. 20 Litres from each compartment.
5. What is the tolerance limit in DL/PL on the dip length vs. measuring tape?
Ans. +-2mm.
6. If invoice temperature is 30 degC, CCT =25deg C & product = 12KL MS. Calculate TVA.
Ans. 72 litres
9. In a 4 chamber 20KL TT, in which compartment we should put CCT for taking the product
temperature?
Ans. 2nd
11. What is the permissible limit of RO product loss in MS and HSD as per RIL standards?
Ans. MS=0.6%, HSD=0.1%
12. If on some day, the regular bank is not accepting cash due to no connectivity or
other reasons then what you will do?
A. We will deposit cash on next day
B. We will go to alternate defined bank and deposit the cash
Ans. B
13. If CC/DC customer comes for fuelling at RO and he refuses for 2 swipes then what
needs to be done?
A. We will not give fuel to customer unless he agrees for 2 swipes.
B. We will give the fuel, raise the bill in cash, swipe card in EDC and later change MOP to CC
before performing COD
Ans. B
14. As per W&M Act, the tolerance limit in a 5 Ltr. Pump test is ____ .
Ans.- + -15ml.
15. During reporting to duty, if any staff is not in full uniform then what needs to be
done?
A. Ignore him
B. Warn him as one time offence
C. Send him back and allow him to join once he comes back in full uniform
Ans. C
16. What is the SLOC to be maintained for 2T oil and other than 2T while generating the
GRN?
Ans. 4300 - sloc for Lubes 2T barrel loose i.e. post mix, 4301 - Lubes other than 2T barrel,
17. What are the field to be checked very carefully while doing PIS entry?
Ans. date, amount, Bank name, PIS date
18. If for the said date total collection is 200000/- (150000 fuel sale/50000 cash loading).
How many times PIS entry needs to be done?
Ans. 2
19. How to enter the detail of IRS sale while doing SSR entry?
Ans. Need to mention the IRS qty. detail in cash/credit card discount qty. column in “Fuel
sale MOP” section
23. How many minutes SS should report before the shift start time?
Ans. 45 mins
26. Time limit for putting back the KMS key in the KMS box for decantation is______
minutes.
Ans. 210 mins
28. For fuelling HSD, DSM will select the appropriate color of HSD nozzle. State the
colour.
Ans. Blue
29. . Which totalizer readings are to be taken for shift/day reconciliations?
Ans. Electronic totalizer but for filling the registers electromechanical readings are used
32. Should not perform COD as auto COD is already done by system. Right or wrong
Ans –Yes, COD should be done after verifying correct MOP prior to 10.00 am the time
defined for auto COD.
33. In case RO SAP password is locked, PIS entry should not be done by RO. Right or
wrong
Ans – Wrong. RO to intimate AM/nearby RO/OST and ensure PIS entry is done. Mail to
be send to HO.
34. If alternate Bank is very far, RO should not do deposition ? Right or wrong
Ans – Wrong. Cash deposition has to be done by RO irrespective of distance.
36. Non-fuel GRN need not have to be generated in SAP ? Right or wrong
Ans-Wrong. GRN need to be done in both Unitech & SAP.