* Area of Largest Roof Serving a Single Gutter System Dimensions based on design area wizard calculations
Gutter in Lineal Ft: 347
* Length at Largest Roof Serving a Single Gutter System
Gutter Length Serving Single DS (ft.): 50
*Assumption: downspouts are equally spaced **Maximum gutter length to be served by a downspout is 50ft per SMACNA ASMM
M (depth to width ratio): 0.75
Sloped Roof Gutters: 1/8
*Per Table 1-4 on page 1.6 of SMACNA ASMM **Half Round Sized Only - capacity of a sloped rectangular gutter may be approximated by using a gutter cross section area not less than that of a semicircular gutter and a depth to width ratio of at least 0.75.
Min. Gutter Width (in.): 5 [Half-Round]
# of Downspouts: 7
Min. Area per DS (in²): 4.77
Min. DS Size (in): 2.00 x 3.00 [Plain Rectangular]
*Per Table 1-3 on page 1.4 of SMACNA ASMM Downspout & Gutter Sizing Reports
Calculations are derived using the 7th Edition of SMACNA's