Professional Documents
Culture Documents
pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
Pyroelectric Infrared
Sensors
Cat.No.S21E-8
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
Part Numbering 2
2
1 SMD-Dual / Parallel Quad Type Pyroelectric Infrared Sensor IRS Series 3
Lens 11
Notice 21
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
Part Numbering
❶Product ID
❷Type
❸Characteristics
❹Individual Specification Code
2
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
▊Features
1. Reflow surface-mounting support
2. Smallest and ultra-thin throughout the trade ▊Dimensions & Circuit Diagrams
(4.7×4.7×2.4mm) 4.7 1.4
2.4 3.8
3. High sensitivity
0.3
(4)
4. Achieves superior electromagnetic noise resistance (3)
01X
4.7
3.8
(2)
characteristics (1)
0.9
(5)
1.0
1.9
5. Personal computers
General Tolerance: ±0.2
0.6 0.6
6. Automatic switches for lighting equipment (in mm)
2.50
▊Rating (25˚C)
Part Number IRS-B210ST01
Responsivity (500K, 1Hz, 1Hz) 3.6mVp-p (Typ.)
(in mm)
Field of View θ1=70° θ2=50°
Optical Filter 3μm long-pass
Electrode −
d(Vin)
Supply Voltage 2 to 15V
Operating Temperature -40 to 70℃
Storage Temperature -40 to 85℃
s(Vout)
(RG)
g(GND)
3
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
▊Features
1. Reflow surface-mounting support
2. Smallest and ultra-thin throughout the trade ▊Dimensions & Circuit Diagrams
(4.7×4.7×2.4mm) 4.7 1.4
2.4 3.8
3. High sensitivity
0.3
(4)
4. Achieves superior electromagnetic noise resistance (3)
02X
4.7
3.8
(2)
characteristics (1)
0.9
(5)
4. Digital photo-frame
3.3
2.5
1.0
1.9
5. Personal computers
General Tolerance: ±0.2
0.6 0.6
6. Automatic switches for lighting equipment (in mm)
0.40
▊Rating (25˚C)
1.10
(RG)
g (GND)
4
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
▊Features
1. Reflow surface-mounting support
2. Smallest and ultra-thin throughout the trade ▊Dimensions & Circuit Diagrams
(4.7×4.7×2.4mm) 4.7 1.4
2.4 3.8
3. High sensitivity
0.3
(4)
4. Achieves superior electromagnetic noise resistance (3)
03X
4.7
3.8
(2)
characteristics
0.9
(1)
(5)
1.9
3.3
2.5
5. Parsonal computers
General Tolerance: ±0.2
0.6 0.6
6. Automatic switches for lighting equipment (in mm)
9. Security devices
10. Other automatic switches
1.025
+ +
(ex. :LCD monitors, Air purifiers, Ventilation fans)
2.05
0.325
0.125
▊Rating (25˚C)
0.5
1.3
Part Number IRS-B345ST03-R1
0.675
Responsivity (500K, 1Hz, 1Hz) 3.6mVp-p (in mm)
(RG)
g (GND)
5
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
▊Features
1. High sensitivity and excellent S/N ratio ▊Dimensions & Circuit Diagrams
2. High stability to temperature changes
3. Slight movement can be detectable.
4.7±0.1
4. High immunity to external noise (Vibration, RFI etc.) θ2=45˚
3.7±0.1
8.2±0.1
9.2±0.2
6. Higher in cost-performance
θ1=45˚
Pyroelectric-element
▊Applications
3.6±0.2
11±2 4.7±0.2
1. Security
φ0.45±0.05
2. Lighting appliances
3. Household or other appliances
5.08±0.05
d s
▊Rating (25˚C) g (in mm)
IRA-E700ST0 d
(RG)
IRA-E710ST0 d
(RG)
6
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
▊Features
1. High sensitivity and excellent S/N ratio ▊Dimensions & Circuit Diagrams
2. High stability to temperature changes
3. Slight movement can be detectable.
4. Non directional sensing with wide F.O.V.
5. High immunity to external noise (Vibration, RFI etc.)
6. Custom design is available.
7. Higher in cost-performance
▊Applications
1. Security
2. Lighting appliances
3. Household or other appliances ∗Specified on the bottom of stem
IRA-E910ST1 d
+ s
-
- (RG)
+
+
-
-
+
g
7
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
80
70
Transmission Ratio (%)
60
50
3
40
30
20
10
0
4500 4000 3500 3000 2500 2000 1750 1500 1250 1000 750 500
Wave Number (μm)
80
60
40
20
0
4000 3500 3000 2500 2000 1800 1600 1400 1200 1000 800
Wave Number (cm–1)
▊Frequency Characteristics
8
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
9
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
3.3V
+V
NJM2904 1/2
C10 C9 R6 U1
153 153 752
R13 R15
224 0.01
R10 R8 R3
825 825 182
D D D2 A_Out
C1 R9 R5
DA3J101F 473 104
106 C8
R1 226
S S NJM2904 2/2
473 U1
U2
NJM2904 1/2 U2 R2
C7 C6 182
G G 106 102 R12 R11 C5 NJM2904 2/2 C4
474 473 105 0.01 106
R7
C2 182 R16
D1 C3
106 105
DA3J101F
NJM2903 1/2
C10 C9 R6 U1
153 153 R4
752 104
R13 +
224
R10 R8 R3 R18
5
825 825 182 0.01
0.01
R14
DD D2 COut
R9 R5
DA3J101F C1 473 104
106 R1 C8
SS 226
473
U2
NJM2904 1/2 U2 R2
C7 C6 NJM2904 2/2 182 R17
GG 106 102 R12 R11 C5 + C4
0.01
474 473 105 106
R7
C2 182 NJM2903 2/2
106 D1 C3
105 U1
DA3J101F
▊Reliability Test
IRS series, IRA-E700 series, IRA-E900 series
Item Test Conditions Criteria
High Temperature 100℃ for 500 hrs.
After test completion, leave for three hours in
Low Temperature —40℃ for 500 hrs.
normal humidity temperature conditions, and
Humidity 60℃, 95% RH for 500 hrs.
then measure.
20 times of following cycle.
1. External appearance:
Heat Cycle —25℃, 30 min. ⇨Room temp., 30 min.⇩
No significant damage
⇧Room temp., 30 min. ⇦55℃, 30 min.
2. Sensitivity:
Apply vibration of amplitude of 1.5mm with 10 to 55Hz band to each of 3
Vibration Tolerance within 20% deviation from original
perpendicular directions for 60 min.
value
Apply shock of 100G sine wave by standard shock tester to each of 3
Shock 3. Noise:
perpendicular directions.
Maximum tolerance +100mV of original value
Soldering Heat Immerse up to 3.0mm from can case in solder bath of 260±5℃ for 10±1 s.
Conform to MIL-STD-202F chapter 112D, condition D.
Hermetic Sealing No generation of bubbles
Immerse in fluorocarbon bath (FC-40) of 125±5℃ for 20 s.
10
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
ø11
ø9.5
(1.45)
ø8
0.75
4.3 (4.5)
5R6
10.25
.5
0.75 2
3.55
2.8
2.8
0.1
B ø9.5 (1.8)
0.79902
25
0.
60˚
ø1
9
2.7
ø1
(6.66)
4-ø
0.5
(5.13) General tolerance: ±0.15mm
(in mm)
2.8(m)
1.7(m)
0.6(m)
6.0(m)
Unit: m
Distance: 4.0m
Sensor : IRS-B210ST01
2.8(m)
1.7(m)
0.6(m)
6.0(m)
Unit: m
Distance: 4.0m
Sensor : IRS-B340ST02
11
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
IML-0654
16.2
13
A hook
11
7
8
hook
8.5 11
SR50
15 (0.5) 10
(0.6)
2
(0.5)
8
6.1
1.5
(1)
(0.5)
3.2
3.2
2º 2º
(1.4)
(1.277)
SR49.5 (1.777)
(0.5)
7.5
0.5
1.4
1.58 5º
3.2
14
0.6 0.4 60º
section A
1.00
5
0.50
0.00
-0.50
-1.00
-1.50 -1.00 -0.50 0.00 0.50 1.00 1.50
Unit: m
Distance: 1.0m
Sensor : IRS-B210ST01
1.00
0.50
0.00
-0.50
-1.00
-1.50 -1.00 -0.50 0.00 0.50 1.00 1.50
Unit: m
Distance: 1.0m
Sensor : IRS-B340ST02
12
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
IML-0660
5
4
3
2
1
0
-1
3.0
-2
R6.0
R6.5 -3
R6.6 -4
A A -5
-5 -4 -3 -2 -1 0 1 2 3 4 5
(Distance: 2.5m, Combination with IRS-B210ST01)
ø11.0
(5.19)
(ø10.4)
(0.5)
5
(0.95)
(8.32)
4
0.1
3
2
1.25
B
1.5 1
3.25
4.0-ø0.4 2.0 0
(R5.7) -1
(10.4)
(6.7)
-2
0.07
Detail Drawing B
(0.57)
-3
0.5
(2.9)
-4
IML-0662
3m 3m
3m 3m
0m 0m
8.0
6.7
9.0
6.7
3m 3m
B B Horizontal Vertical
3
4-C1.4
2.9 4-R1.8
2
A
4-C0.5 2-C0.5 1
4.4
2.75
4.7 A
4.7 -1
B-B A-A
-2
General Tolerance: ±0.2mm
Non Instructions Corner: max.R0.2 -3
(in mm) -3 -1 1 3
(Distance: 1m, Combination with IRS-B210ST01)
13
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
焦電型赤外線センサ/レンズ(IRSシリーズ)
IML-0668
-1
9.2 (IRS-B210ST01-R1)
7.2 -2
A 0.3
ø1 3
2
B B
A 1
4.8 (2)
0
8.0
A-A
-1
(IRS-B340ST02-R1)
(2)
(2.3)
(0.3)
B-B -2
General Tolerance: ±0.2mm
Non Instructions Corner: max.R0.2 Figure 3-2 Luminous Intensity Distribution -3
(in mm) (Distance: 3m, Combination with IRS-B340ST02) -3 -2 -1 0 1 2 3
14
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
IML-0669
R6.5
ø11
ø12
Thickness 0.4t
3.25 7.254
1.254
SR
5.
0.07
1.55
5
0.57
1.13
1.5 0.9
2 0.5
ø10.2
Distance: 2.5m
Distance: 2.5m
max: 6.0m
Sensor : IRS-B210ST01
2.5m
Distance: 2.5m
Distance:
Distance:
Distance: 2.5m
2.5m
max: 6.0m
Unit: m
max: 7.5m
Distance: 2.5m
Sensor : IRS-B340ST02
15
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
IML-0635
IML-0636
16
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
IML-0638
6.11m 3m
3m
42º
4.91m 0m
42º
3m
On the Floor Vertical
3m 0m 3m
Vertical
Horizontal
45.5º 45.5º
Pyroelectric Element
Horizontal
Assembled with Murata sensor IRA-E700 Series.
17
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
(in mm)
5
PPGI0626
(in mm)
18
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
(in mm)
19
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
m
34 deg.
3.0
2.0
12.5 deg.
1.0
ø2.0
0
1.0 2.0 3.0 4.0 5.0 m
1.0
12.8
16.5
21.5
26.5
2.0
5.0 3.0
20.5 Angle of Horizontal
22.5
Focal point (Pyro-Element)
m
2.0
16.4
5.1
0
1.0 2.0 3.0 4.0 5.0 m
1.0
2.0
Angle of Vertical
52 deg.
IMD-FL01W
m
34 deg.
3.0
2.0
12.5 deg.
1.0
0
1.0 2.0 3.0 4.0 5.0 m
ø2.0 1.0
2.0
12.8
16.5
21.5
26.5
3.0
Angle of Horizontal
5.0
20.5 m
22.5 2.0
Focal point (Pyro-Element)
15 deg.
1.0
16.4
5.1
(in mm) 0
1.0 2.0 3.0 4.0 5.0 m
1.0
1.0
2.0
Angle of Vertical
20
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
Notice
▊Notice
1. Caution (Design) 2. Caution (Handling and Storage)
(1) Please make sure that your product has been evaluated (1) The optical filter of the sensor should not be scratched or
and confirmed against your specifications when our soiled.
product is mounted to your product. (2) Strong shock should be avoided.
(2) Be sure to provide an appropriate fail-safe function on (3) Electrostatics and strong electromagnetic field should be
your product to prevent a second damage that may be avoided.
caused by the abnormal function or the failure of our (4) The sensor should be kept on conductive sponge.
product. (5) High temperature, high humidity, fluid such as water or
(3) In case of outdoor use, suitable optical filter and water alcohol etc., corrosive gas (SO2, Cl2, NOX etc.) and sea
and humidity proof structure should be applied. breeze should be avoided.
(4) To prevent failure or malfunction, please use a stabilized
power supply.
(5) Please avoid using the sensor in the following conditions
because it may cause failure or malfunction.
(a) in such a fluid as water, alcohol etc. corrosive gas
(SO2, Cl2, NOX etc.) or sea breeze
(b) in high humidity
(c) in a place exposed directly to sunlight or headlights of
automobile
(d) in a place exposed to rapid ambient temperature
change
(e) in a place exposed directly to an air-conditioner or
heat vent
(f) strong vibrations
(g) in a place exposed to strong electromagnetic field
(h) in such a place where infrared ray is shaded
(i) in any other place similar to the above (a) through (h)
21
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1
Notice
▊Notice
3.Caution (Mounting)
(IRS Series)
Soldering Conditions
Following figure shows temperature profile when reflow soldering.
220ºC
Heating Gradual
220ºC in air
min.
180ºC
150ºC 2ºC/sec.
Pre-Heating
150-180ºC max.
100ºC
Time (sec.)
Heating period (20sec. 30-60 120 sec.
80-100 sec. min.) sec.max. min.
3.Caution (Mounting)
(IRA Series)
(1) Soldering
(a) Hand soldering should be applied.
(c) Soldering flux should be rosin flux and not contain more than 0.2wt% chlorine.
Soldering flux should be removed after soldering.
(2) Cleaning
Soldering flux should be removed after soldering.
Soldering flux may cause malfunction or degradation of character unless sufficiently cleaned.
22
S21J.pdf
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.10.1