Professional Documents
Culture Documents
Energy Neighbourhoods Tank Calculator
Energy Neighbourhoods Tank Calculator
Tank Measurements
Length 1663 mm
Only fill in yellow cells - Measure the Diameter and leng
Diameter 840 mm estimated max volume, that should read similar to eithe
Is it Plastic Either Plastic or of the tank. Each time you have filled or partially filled th
and will be broadly accurate if you have 4 fills noted. ve
Estimated Max volume 1053 Litres that will calculate the cumulative meter reading.
Volume in the
Date Height Tank Liters added Litres used
1 1053 0
2 1053 0
3 1053 0
4 1053 0
5 1053 0
6 1053 0
7 1053 0
8 1053 0
9 1053 0
10 1053 - 0
11 1053 - 0
12 1053 - 0
13 1053 - 0
14 1053 - 0
16 1053 - 0
17 1053 - 0
18 1053 - 0
19 1053 - 0
20 1053 - 0
21 1053 - 0
22 1053 - 0
23 1053 - 0
24 1053 - 0
25 1053 - 0
26 1053 - 0
27 1053 - 0
Plastic 1
Metal 2
easure the Diameter and length (excluding domed ends and legs if present). This will calcluate the
at should read similar to either the maximum fill you have had, or the capacity printed on the side
u have filled or partially filled the tank, enter that in the "litres added". This will give the historical use
ate if you have 4 fills noted. very accurate with 6 or more fills included. Enter the height data and
ulative meter reading.
900 900
900
900
900
900
900
900
900
900
900
900
900
900
1663 840 420 840.00 -1
Ba
Enter Measurements
Angle (rads) Cross sectionFull Cross sectional Area (mm portion of full Tank( %)
Simple Volume (l) Width (mm protrusion area of la Difference Volume of riNo. of ribs Total vol of
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
317
h no. of endsFull vol of Vol of 2 ful dip height (Width of l Height of l Thickness No. legs
Tank legs (NOTE: Legs volume varies upto point where chord = width of leg base thus at this point remove formula and paste fu
Calculations
d (choose
greater of Cross
R-h(dip) sectional area
or R- relevant to Part area (mm2) (use
Height of legs (can only Chord (enter height of leg if dip is
leg) (set go to up to leg width of legs if oil higher otherwise use
at R-leg) d/R Angle (Radheight) (mm2) level > leg height) dip)(set at leg h)
point remove formula and paste full volume) Final volumes in oil tank
Calculations
1 1/5/1900 2.00 2 2 0
2 907 0
3 907 0
4 907 0
5 907 0
6 907 0
7 907 0
8 907 0
9 907 0
10 907 0
11 907 0
12 907 0
13 907 0
14 907 0
15 907 0
16 907 0
17 907 0
18 907 0
19 907 0
20 907 0
21 907 - 0
22 907 - 0
23 907 - 0
24 907 - 0
25 907 - 0
26 907 - 0
27 907 - 0
length and the max depth of the tank.
e, that should read similar to either the
printed on the side of the tank. Each
k, enter that in the "litres added". This
ly accurate if you have 4 fills noted.
Enter the height data and that will
he project.
Cumulative - Meter Indicative use
reading - liters per day.
0
0
0
counter in the reference energy use on the website (green Cells).
Cylindrical Tank
Tank Measurements
Length 1663 mm
Only fill in yellow cells - Measure the Diameter and leng
Diameter 840 mm the estimated max volume, that should read similar to e
Is it Plastic Either Plastic or the side of the tank. Each time you have filled or partiall
historical use and will be broadly accurate if you have 4
Estimated Max volume 1053 Litres height data and that will calculate the cumulative meter
Volume in the
Date Height Tank Liters added Litres used
14 1/26/2012 100 94 - 49
18 2/23/2012 1053 - 0
19 3/1/2012 1053 - 0
20 3/8/2012 1053 - 0
21 3/15/2012 1053 - 0
22 3/22/2012 1053 - 0
23 3/29/2012 1053 - 0
24 4/5/2012 1053 - 0
25 4/12/2012 1053 - 0
26 4/19/2012 1053 - 0
27 4/26/2012 1053 - 0
Plastic 1
Metal 2
easure the Diameter and length (excluding domed ends and legs if present). This will calcluate
e, that should read similar to either the maximum fill you have had, or the capacity printed on
time you have filled or partially filled the tank, enter that in the "litres added". This will give the
broadly accurate if you have 4 fills noted. very accurate with 6 or more fills included. Enter the
alculate the cumulative meter reading.
195 2.2
735 2.2
1167 4.8
1846 2.2
2229 1.1
2320 13.0
2381 8.7
2457 10.8
2532 10.7
2605 10.5
2662 8.1
2756 13.4
2805 7.0
Filled less than indicated or tank
2805 0.0 dimensions incorrect -1
2931 18.0
2984 7.7
2984 0.0
2984 0.0
2984 0.0
2984 0.0
2984 0.0
2984 0.0
2984 0.0
2984 0.0
2984 0.0
2984 0.0
1663 840 420 840.00 -1
Ba
Enter Measurements
Angle (rads) Cross sectionFull Cross sectional Area (mm portion of full Tank( %)
Simple Volume (l) Width (mm protrusion area of la Difference Volume of riNo. of ribs Total vol of
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
571.87 0.00
488.73 0.00
432.87 0.00
363.47 0.00
295.48 0.00
229.98 0.00
180.17 0.00
100.96 0.00
61.92 0.00
868.53 0.00
753.42 0.00
704.32 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
921.60 0.00
317
h no. of endsFull vol of Vol of 2 ful dip height (Width of l Height of l Thickness No. legs
Tank legs (NOTE: Legs volume varies upto point where chord = width of leg base thus at this point remove formula and paste fu
Calculations
d (choose
greater of Cross
R-h(dip) sectional area
or R- relevant to Part area (mm2) (use
Height of legs (can only Chord (enter height of leg if dip is
leg) (set go to up to leg width of legs if oil higher otherwise use
at R-leg) d/R Angle (Radheight) (mm2) level > leg height) dip)(set at leg h)
point remove formula and paste full volume) Final volumes in oil tank
Calculations
12 1/12/2012 907 - 0
13 1/19/2012 907 - 0
14 1/26/2012 907 - 0
15 2/2/2012 907 - 0
16 2/9/2012 907 - 0
17 2/16/2012 907 - 0
18 2/23/2012 907 - 0
19 3/1/2012 907 - 0
20 3/8/2012 907 - 0
21 3/15/2012 907 - 0
22 3/22/2012 907 - 0
23 3/29/2012 907 - 0
24 4/5/2012 907 - 0
25 4/12/2012 907 - 0
26 4/19/2012 907 - 0
27 4/26/2012 907 - 0
length and the max depth of the tank.
e, that should read similar to either the
printed on the side of the tank. Each
k, enter that in the "litres added". This
ly accurate if you have 4 fills noted.
Enter the height data and that will
195 2.2
735 2.2
1167 4.8
1846 2.2
2297 1.4
2320 3.2
2381 8.8
2428 6.6
2474 6.6
2495 3.0
2495 0.0
2495 0.0
2495 0.0
2495 0.0
2495 0.0
2495 0.0
2495 0.0
2495 0.0
2495 0.0
2495 0.0
2495 0.0
2495 0.0
2495 0.0
2495 0.0
2495 0.0
2495 0.0
counter in the reference energy use on the website (green Cells).