Professional Documents
Culture Documents
iiii
Head Protection
V-Gard™ Protective Caps and Hats
Classification: Type 1
Applications: General Purpose
M aterial: Polyethylene
Available Styles: Slotted Cap; Slotted Full-Brim Hat
Sizes: Cap: Small (6 - 718"); Standard (61/2 - 8"); Large (7- 81/2") Hat: Standard (612 - 8")
Standards: ANSI/ISEA Z89.1-2014 (Class E); CSA Z94.1-2005 (Class E)
V-Gard™ Cap
w ith Fas-Trac III
Suspension
orange red yellow orange
black
Did you know that the working life o f a hard hat is 3 years from the issue date? Make sure you write the issue date on the label
f
provided in the back of the cap.
Also it is recommended that suspensions be replaced after 2 years as they degrade quicker from contact with your skin.
Inspect your cap before every use and replace caps immediately that show signs of damage or have been impacted.
NOTE: This Bulletin contains only a general description of the products shown. While uses and performance capabilities are described,
under no circumstances shall the products be used by untrained or unqualified individuals and not until the product instructions
including any warning or cautions provided have been thoroughly read and understood. Only they contain the complete and
detail information concerning proper use and care o f these products.
L J
www.MSAsafety.com