Dry-disconnect couplings are used in industries that handle expensive, hazardous, or hard to dispose of fluids to allow for quick and spill-free connections and disconnections of hoses and pipelines. They operate by pushing in and turning to connect fully, and turning and pulling to disconnect without spilling. They come in various sizes made from stainless steel, brass, or aluminum with interchangeable couplers and female NPT or flange adapters to connect to tanks and manifolds.
Dry-disconnect couplings are used in industries that handle expensive, hazardous, or hard to dispose of fluids to allow for quick and spill-free connections and disconnections of hoses and pipelines. They operate by pushing in and turning to connect fully, and turning and pulling to disconnect without spilling. They come in various sizes made from stainless steel, brass, or aluminum with interchangeable couplers and female NPT or flange adapters to connect to tanks and manifolds.
Dry-disconnect couplings are used in industries that handle expensive, hazardous, or hard to dispose of fluids to allow for quick and spill-free connections and disconnections of hoses and pipelines. They operate by pushing in and turning to connect fully, and turning and pulling to disconnect without spilling. They come in various sizes made from stainless steel, brass, or aluminum with interchangeable couplers and female NPT or flange adapters to connect to tanks and manifolds.
Dry-Disconnect couplings are used in the following industries: Petroleum, chemical, agricultural, transporta- tion, marine operations, pharmaceuticals, tank farms and in-plant applications. These couplings are designed for quick and spill free connection and disconnection of hoses and pipelines. When you are moving fluids that are: expensive, hazardous to the environment, expensive to reprocess or dispose of, and prone to accident spillage/product then Dry disconnect couplings are a good solution to prevent problems. Principle of opera- tion is identical for all sizes. To Open/Engage coupling and adapter push in and turn, it’s coupled full flow. To Close/Disengage the coupling and adapter turn and pull, it’s released with no spillage. These couplings are interchangeable with Avery Hardoll and Todo-matic. Coupler x Female NPT Dry Disconnect
• Viton seals • Viton seals • Coupler has built-in swivel • Typically installed on the tank or manifold • Stainless steel ball bearings • Available in female NPT or 150lb. ASA flange • Shaft journal in SS embedded in PTFE to elimi- • Conical valve seat to eliminate the risk for “piston nate seizure blow out” • Riveted piston pin to minimize the risk for failure • PTFE bearing between the piston shaft and the under extreme pressure conditions piston guide to eliminate the risk for seizure • Protecting ring is weather resistant rubber. • Aluminum adapter has Aluminum poppet, with • Electrically conductive Stainless Steel internal parts • All wetted parts are stainless steel • Stainless Steel adapter has Stainless Steel • Rollers for the stainless steel couplings are has- poppet, with Stainless Steel internal parts telloy C276 on the stainless steel shaft • Brass / Gunmetal adapter has Brass poppet, with • Aluminum-Bronze on the stainless steel shaft Brass and Stainless Steel internal parts • Composite dust plugs are available for couplers • Composite dust caps are available for adapters