Professional Documents
Culture Documents
Description
The InteliLiteNT range offers a wide choice
of integrated control solutions for gen-sets
operating in single standby mode. Based
on the field proven InteliLite architecture,
the family of controllers fulfills every
requirement from simple to complex and
AMF to MRS applications – with specific
models providing modem and internet
control, user configuration and complete
gen-set monitoring and protection.
LOCATE
Benefits
ComAp’s LOCATE system uses the power of cellular communications technology to provide
users and peace of mind that the monitored asset is where it should be. Locate provides Less wiring and components
location data to the WebSupervisor system without the need for costly GPS positioning
equipment and works anywhere there is a cellphone signal, even indoors. Not only will Less engineering and programming
WebSupervisor show the position of the monitored equipment, it will also maintain a track
history and show route of the movement on a map. LOCATE – Simply Here! Remote monitoring helps reduce
call-out costs of service engineers
AirGate
Modern communications made simple. ComAp’s powerful AirGate technology is provided
Optional additional 8 binary
in a range of our controllers and makes remote internet connection to the ComAp controller inputs/outputs
easy. Just register the AirGate enabled controller on our website and from then on let
ComAp’s unique system locate and maintain contact with the controller, no need to worry Optional Internet with control and
about VPN’s, Static IP addresses or corporate firewalls, simple! “AirGate – Simply connected.”
monitoring over web pages
Support of wireless Internet
Active S MS / E-mails
Direct communication with EFI engines
ComAp is a member of ComAp products meet the highest Perfect pr ice / performance r atio
AMPS (The Association of standards, with every stage of production
Manufacturers of Power undertaken in accordance with the ISO
History log – easy troubleshooting
MEMBER generating Systems). certification obtained in 1998. and warranty claim handling
Features
3 phase AMF function1) Inputs and outputs Communication interfaces
• Over/Under frequency • 6/7 1) or up to 14/151) • Optional RS232, RS485 (including Modem
• Over/Under voltage (with IL-NT BIO8) binary inputs support) or USB plug-in interface
• Voltage asymmetry • 6/7 1) or up to 14/151) • Modbus RTU/ TCP (requires
(with IL-NT BIO8) binary outputs RS485 interface/IB-Lite)
3 phase generator protections • 3 configurable analog inputs with • SNMP (requires IB-Lite)
• Over/Under frequency wide list of predefined senders • Optional Internet/Ethernet via IB-Lite
• Over/Under voltage • Additional inputs/outputs • On-line control and monitoring over web
• Current/Voltage asymmetry available2) via IG-IOM or IGS-PTM pages (embedded web server) via IB-Lite
• Overcurrent/Overload • Magnetic pickup input • Optional GSM modem/wireless
• D+ pre-excitation terminal Internet via IL-NT GPRS
True RMS Voltage measurement • Optional 8 analog gauge
• 3 phase generator and mains1) voltages drive outputs, compatible Mechanical and operation parameters
• Voltage range 277 V p-n, 480 V p-p with VDO, Style gauges • Unit dimension 120 × 180 mm
• Maximal measured • Sealed front face rated for IP65
voltage 300 V p-n eFI engine support • Hard plexiglass LCD cover
• PT ratio range 0.1–500 • Cummins Modbus • Operation temperature:
• Engine specific J1939 for all major • -20°C to +70°C standard version
True RMS current measurements manufacturers (see table below) • -40°C to +70°C low temperature version
• 3 generator phase currents • Diagnostic messages in plain text • Power supply voltage 8–36 V
• Current range 5 A • Voltage drops shorter than 50 ms
• Maximal measured current 10 A SMS/e-mails do not affect operation
• CT ratio range 1–5000 • SMS commands
ANSI code Protection
• E-mails5)
Power measurements • Alarm and event SMS 59 Overvoltage
• Active/Reactive Power and 27 Undervoltage
Power Factor per phase Miscellaneous features 47 Voltage asymmetry
• Gen-set Active and Reactive • Support of telecom applications 81H Overfrequency
Energy counter2) with special firmware
81L Underfrequency
• Mains Active and Reactive • Integrates with UPS systems6)
50+51 Overcurrent*
Energy counter3) • Fuel theft protection
• Apparent power • Mutual stand-by system 46 Current unbalance
• Automatic temperature 32 Overload
event and performance log + RTC based cooling/heating 47 Phase rotation**
• Flexible event based history • Load shedding, dummy load 71 Gas (Fuel) level
with up to 119 events • Customer logo screen
50N + 64 Earth fault current
• Reason, Running hours + all • Two multipurpose timers
important values are stored4) • Alternative configuration (50Hz/60Hz) * For MRS 10 and AMF 20 models Shortcurrent only
• Reason, Date and Time + all ** Fixed setting
important values are stored2)
• Battery backed-up RTC2)
InteliLiteNT controllers support J1939 for all major brands:
• Test Run scheduler1)
• Caterpillar • GM • MAN • Sisu
User interface • Cummins • Isuzu • MTU • VM Motori
• Graphic 128 × 64 pixels display • Detroit Diesel • Iveco • Perkins • Volvo Penta
• 2 languages, user changeable from PC • Deutz • John Deere • Scania and others
• Wide range of languages in package
• Setpoints adjustable via
controller buttons or PC Order codes
• Large font in user interface Controller Order code
• Buttons with mechanical feedback
InteliLite NT
MRS 10 IL-NT MRS10
• Customized front facia on request
InteliLiteNT MRS 15 IL-NT MRS15
InteliLiteNT MRS 16 IL-NT MRS16
InteliLite NT
AMF 20 IL-NT AMF20
InteliLiteNT AMF 25 IL-NT AMF25
Accessories
Key
IL-NT RS232 – RS232 Extension Board IC-NT CT-BIO7 – Hybrid Current Input
MRS – manual and remote start controller
IL-NT RS232-485 – Dual & Binary Input/Output Extension Module AMF – automatic mains failure start controller
Port Extension Board IL-NT RD (SW) – Remote Display
IL-NT S-USB – Service USB Module Software for InteliLiteNT Controllers 1) Only for AMF models
2) Only for MRS 15, MRS 16 and AMF 25 models
IB-Lite – Internet/Ethernet Plug-in IGS-PTM2) – Analog/Binary
3) Only for AMF 25 models
Module including Web Server Input/Output Module
4) Only for MRS 10 and AMF 20 models
IL-NT GPRS – GSM Modem/ IG-IOM2) – Analog/Binary 5) E-mails only for IB-Lite
Wireless Internet Module Input/Output Module 6) Detail information available on request
IL-NT AOUT8 – Analog Outputs IGL-RA152) – Remote Annunciator
for PWM Gauges Module
IL-NT BIO8 – Binary Input/
Output Module
InteliLite NT
Schematic diagram
or -USB
IL-NT S
+24V
S232
IL-NT R
PRS C
IL-NT G
PLY IB-Lite
R SUP
ALA
POWE VDC
8 to 36 TION
- UNICA LE
RM
+ COMM MODU
STO
PLUG-IN
P
5
UP TO OUTPUTS
Y )
BINAR OLLECTOR
C
7 (OPEN or
UP TO INPUTS
Y IGS-PTM
SION BINAR
EXTEN MODULE IG-IOM
NT
te
PLUG-IN
InteliLi MAINS
MEA
ATOR CAN -
J1939
OUT8 GENER TENSIO
N B
VOL
SUR
IL-NT A I/O EX
MEA
TAG
15
IGL-RA
EME
VOL
CUR
SUR
G
ANALO
E
E
ENGIN
NT
TAG
INPUTS
REN
EME
Y
BINAR
OUTPU
TS models
E
r AMF
NT
y fo
(OPEN TOR) A Onl MRS 16
RS 15,
IO8 COLLE
C odels M
GEN
IL-NT B on M
B Only MF 25
MAIN
D+
and A
ERA
or
t:
SC
connec RD (SW),
sible to
TOR
T
RPM C Pos ODEM, IL-N NET
.B. C
Oil P
3ph
2 PC, M R
Star
, IN TE
/PLC
Fue
C.B
SCADA
ONT
ress
Aux xcitatio
ter
Pre
MAINS
l So
3ph
. CO
3ph
ure
ROL
e
Alte
7
leno
CT-BIO
NTR
IC-NT A
rnato
id
OL
n
r
LOAD
1
Codes
+ Fault
Values
OR
G ENERAT uest
ed Req
E top - Spe J1939
ENGIN Start/S
L/GAS
DIESE
1 ECU
Available models
MRS 10 MRS 15 MRS 16
MANUAL AND ReMOTe START CONTROLLeR MANUAL AND ReMOTe START CONTROLLeR MANUAL AND ReMOTe START CONTROLLeR
WITH SUPPORT FOR eFI eNGINeS WITH SUPPORT FOR eFI eNGINeS
AMF 20 AMF 25
AUTOMATIC MAINS FAILURe START CONTROLLeR AUTOMATIC MAINS FAILURe START CONTROLLeR WITH SUPPORT FOR eFI eNGINe
InteliLite NT
Typical applications
IB-Lite
InteliLiteNT MRS 16 starts, controls and
monitors the gen-set and controls the
J1939 circuit breaker to supply the load.
NT
ite MRS
16 Service provider can monitor and control
InteliL
L
gen-set operation remotely via Internet.
HOTE
Controller sends active E-mails
GEN
-SET upon alarm event.
OOM
The generator is protected by a
INE R
ENG
built in over/under voltage and
frequency protections as well as
IDMT overcurrent protection.
The controller communicates with
INT
ERN
ET engine management unit by a CAN
J1939 bus. Engine values and alarms
VIDE
R are visible on a graphical LCD screen
PRO
VICE
SER in plain language – no need to learn
cryptic flashing or numeric error codes.
Scope of supply:
1× InteliLiteNT MRS 16
1× IB-Lite
S
MAIN
PRS
IL-NT G
R
STANDBy SySTeM
SMITTE
V TRAN
MAIN
S
J193
9 ReMOTe MONITORING VIA INTeRNeT
NT MF
25
ite A
InteliL
Stand-by gen-set with electronic engine.
PRS
IL-NT G InteliLiteNT AMF 25 continuously monitors
S
MAIN
NSMIT
TER
ENG
INE a mains supply and automatically starts
TV TRA M 9
ROO J193
25 an engine and switches load to a standby
NT MF
ite A
-SET
InteliL generator set in case of mains failure.
PRS GEN
IL-NT G
The service provider can monitor the gen-
R
J193
9 set operation remotely via GPRS modem.
INE
25 ENG
NT
ite AMF ROO
M The operator can use LiteEdit for a
InteliL
viso
r, single gen-set view or WebSupervisor
-SET per VIDER
GEN bSu
We E PR
V IC
O
for total fleet management.
SER
ENG
INE The generator is protected by a
M
ROO
built in over/under voltage and
GEN
-SET ER NET frequencyr,protections as well as
INT viso
IDMT per VIDER
bSuovercurrent
O protection.
We E PR
V IC
TheSER controller communicates with
Order code IL-NT MRS10 IL-NT MRS15 IL-NT MRS16 IL-NT AMF20 IL-NT AMF25
Analog inputs 3 3 3 3 3
Magnetic pickup l l l l l
Input configuration l l l l l
Output configuration l l l l l
Generator protections l l l l l
Engine hours l l l l l
CAN-J1939 interface – l l – l
Internet support with Web server with IB-Lite with IB-Lite with IB-Lite with IB-Lite with IB-Lite
Internet support over GPRS with IL-NT GPRS with IL-NT GPRS with IL-NT GPRS with IL-NT GPRS with IL-NT GPRS
Modbus interface O O O O O
Remote display O O O O O
Cummins Modbus – O O – O
InteliLite NT
References
Poland
Using ComAp power controllers is a huge advantage
USA
Stand-by Power for Manufacturing Facility
“Our customer’s site had more than 10 gensets of various makes and vintages
spread out over as many buildings. As we were commissioning a new genset
on their campus, we identified an opportunity to retrofit their existing fleet with
InteliLiteNT, giving them the ability to monitor all their sets remotely. The remote
communications flexibility has allowed our service department to respond to
our customer’s needs in an instant and provide them with great service. This has
saved our customer an incredible amount of time and money.“
Larry Davis
Sales Manager
www.acfstandbysystems.com
www.comap.cz
MANUFACTURER: LOCAL DISTRIBUTOR / PARTNER:
ComAp a.s.
Czech Republic
Phone: + 420 246 012 111
Fax: + 420 266 316 647
E-mail: info@comap.cz
Internet: www.comap.cz
Customer satisfaction is our mission. We continuously develop our people to be the best to succeed in our mission.
© ComAp. Features and specification are subject to change without prior notice. 2013-04/CPLEILNT