Professional Documents
Culture Documents
Industry's first
・
界
・
初
・
Prevailing-torque type
Precision Locknut
Locking Performance
Accuracy of Thread
Accuracy of Bearing Surface Run-out
Fuji Seimitsu Co., Ltd. who developed the FINE U-NUT which
does not require a machined key-way for locking, has
developed industry's first TWIN FU-NUT, a prevailing-torque
type high precision nut.
The TWIN FU-NUT is a breakthrough in bearing locknuts,
delivering “accuracy of thread,”“accuracy of bearing
surface run out,”and“locking performance”all in one easily
assembled precision lock nut.
Friction Ring
P P
Spacer
F P' P' F
h
Spacer
d2
φd1
MATERIAL
Nut Body : S45C (Heat Treated)
Crimping Mount Friction Ring : SUS301
Spacer : SUS301
Allowable
Code No. d×p φd 1 d2 H B b h g B p axial dead
load (KN)
PREVAILING TORQUE
Maximum Install Torque Minimum Removal Torque
〔N・m〕 〔N・m〕
1cycle 1cycle
5cycle 5cycle
50.0 50.0
40.0 40.0
30.0 30.0
20.0 20.0
Prevailing Torque
Prevailing Torque
10.0 10.0
7.0 7.0
5.0 5.0
4.0 4.0
3.0 3.0
2.0 2.0
1.0 1.0
0.7 0.7
0.5 0.5
15 20 25 30 35 40 45 50 15 20 25 30 35 40 45 50
Nominal Diameter (mm) Nominal Diameter (mm)
The prevailing torque is generated by the reaction to the spring acting on the shaft threads.
(The graphs can be used for reference when using lubricated fasteners.)
NOTES ON USE
When using TWIN FU-NUT, strict compliance with the following is required as
the TWIN FU-NUT is used for securing critical components.