Professional Documents
Culture Documents
It is suggested that use NIC to collect the log of typical scenario. Click me to find the
For issue site or cell, please collect the needed logs of following list.
Needed Logs
No. (Click hyperlink to find the
collection guide)
1 KPI Counters
2 UU/S1/X2 Trace
3 Cell DT Trace
Remark
Back
PRS_Template_LTE_Data_Counters_02.xml
PRS_Template_LTE_Data_Counters_03.xml
436286787.xlsx 文档密级
Back
Collection Way
Trace UU/S1 by U2000
Trace UU/S1 by WebLMT
Choose Monitor > Signaling Trace > Signaling Trace Management from the m
Double click to open the UU/S1 interface trace. Enter the task name, and
following figure.
by right-clicking the task and choosing Stop from the shortcut menu. If Finished is displayed in the
Export from the shortcut menu to save the tracing result as a TMF file on the local PC.
-clicking the task and choosing Stop Trace Task from the shortcut menu. Then, right-click the task and
ave the tracing result as a TMF file on the local PC.
s displayed in the
l PC.
Back
Collection Way
Trace Cell DT by U2000
Choose Monitor > Signaling Trace > Signaling Trace Management from the m
In the displayed Cell DT Trace dialog box, enter the task name, select a
14/34/41/50/133
NOTE
1.Not all trace models can be simultaneously selected. If
traced on an LBBP. Otherwise, the data is excessively grea
are not selected, multiple cells can be traced at the same
recommended because cell tracing is oriented to all UEs an
2.If cell DT tracing is simultaneously performed with IFTS
and MAC Layer Trace Field prevail
ace Management window, choose Trace Type > LTE > Information Collection > Cell DT Trace, and double-click Cel
14/34/41/50/133
g the task and choosing Stop from the shortcut menu. If Finished is displayed in the Status
from the shortcut menu to save the tracing result as a TMF file on the local PC.
ously selected. If L1 or L2 related contents are selected, only one cell can be
is excessively great in amount, affecting services. If L1 or L2 related contents
traced at the same time. However, simultaneous tracing of multiple cells is not
ented to all UEs and the data is excessively great in amount.
performed with IFTS tracing, the latest values configured for MAC Layer Trace Item
he Status
Collection Way
Collect Board Log by U2000
Collect Board Log by WebLMT
Choose Software > Software Browser from the main menu of the U2000. On the NE t
and choose Other from the shortcut menu. On the Other tab page in the right pan
Right-click BRDLOG -ENODEB and choose Transfer > From NE to OSS Client from the
Choose needed site and select "All", and then set the parameters.
Set the destination path for storing the logs on the local PC, and click OK to
Run the ULD FILE command to upload BRD logs. In the command, set IP to the IP a
ULD FILE: FUNCTYPE=ENODEB, SRCF=BRDLOG-ENODEB, CN=0, SRN=0, SN=7, DSTF="LMPT-BR
NOTE
1.Uploading files in non-compressed mode takes a longer time than uploadi
10% to 50%, and CPU overload affects UE access. Therefore, it is recommen
2.BRD logs on different boards need to be collected separately. The cab
be queried by running the DSP BRD command (applicable to 3900 series ba
Search for the BRD log file in GZ format in the path configured on the FTP serv
decompressed to ensure that the format of the compressed file is correct.
e U2000. On the NE tab page of the displayed Software Browser page, right-click the desired NE
age in the right pane, select BRDLOG -ENODEB.
, set IP to the IP address of the FTP server, and set the user name and password to those configured on the F
SN=7, DSTF="LMPT-BRD-007-LOG", MODE=IPV4, IP="10.148.30.21", USR="admin", PWD="*****", CF=COMPRESSED;
ger time than uploading files in compressed mode. However, uploading files in compressed mode increases CPU usage
efore, it is recommended that files be uploaded in non-compressed mode with flow control performed.
d separately. The cabinet number, subrack number, and slot number that must be set based on site conditions c
ble to 3900 series base stations). For the BTS3202E/BTS3203E, run the DSP BRU command.
ured on the FTP server. Click the file to check whether the compressed file can be properly
le is correct.
ose configured on the FTP server.
, CF=COMPRESSED;
perly
NIC Scenario Collection
Collection Way
By NIC
After eRan12.1 SPC260(U2000 17BSPC240),it is suggested that use NIC(Network Information Collecti
For KPI Counters collecting, NIC can collect the KPI counters of last week. If you need more early
NIC
Input "User Name" and "Password". The "User Name" and "Password" are same as U2
Step2 Select Fault Handling
Step3 Select problem scenario, Input Task Name and then click "Next"
eg. Access scenario include: KPI Counters(last two weeks), UU/S1 Trace(1 ho
Click OK button to start monitoring the 1 minute KPI, and the 1 minute KPI can
Step4 Set KPI Counters collection time range by "Data collection time range", Sel
Also can set the timed task and target server for collection result file.
Select problem site.
Step5 Set parameters and click "Finish" to collect log of problem scenario
eg. For Access, it just needs to input "Local Cell ID" because other parameters
Local Cell ID:If you know which cell have problem then input its local
Gather Time(s): The time range of UU/S1 and Cell DT collection. The de
L2 Trace Model:L2 Cell DT tracing items. For example, the Access scena
Step6 Wait for NIC collection. After finished, download the logs and etrans to GT
NIC is collecting.
After finished, download the logs and etrans to GTAC or R&D.
Back
), UU/S1 Trace(1 hour), Cell DT trace(1 hour), CFG file, MML result, Board logs.
he 1 minute KPI can be exported as excel document.
n result file.
lem scenario
use other parameters have been set the default value(also you can change them). Click "Finish" to collect the
then input its local cell ID. If you do not know which cell have problem in site then input one cell of them
DT collection. The default value is 3600 seconds(1 hour).
ple, the Access scenario needs 11/14/34/50.
gs and etrans to GTAC or R&D.
SON and so on.
"Finish" to collect the logs.
input one cell of them.