Professional Documents
Culture Documents
Translational Repeat-This command is usually used to repeat the element in linear direction.
Circular Repeat-This command is usually used to repeat the element in radial direction.
Generate mirror -This command is used to create the same object at a distance.
Nodal Load
we can apply a loads and moments at nodes in different directions. It is usually used to
apply loads in case of plane and space trusses and supports of different beams.
Member Load - It is adopted only on horizontal members (beam) and vertical members
(column).
Plate loads - The next one is plate loads. Usually it is used to design the slabs, masonry walls
and so on.
Surface Loading - Surface loading also the same function of plate loading
Seismic Load - This load is considered where the earth quake occurs. The direction of seismic is
assigned.
Wind Load - When building is up growing above 3 storey the wind load should be considered.
In multistory building when the height of building is higher, the winds pressure also more.