Professional Documents
Culture Documents
Step 1.
Turn on program
Step 2.
Step4
4.1Click Read mode for change and brown and select file
4.2 Click Read Button Brown and select file from directories
Stap 5
Step 7 Clear all address, then select the right Address for HDCP
2)、click red circul parts to make sure all that been clear. If not, please click
“Clear ALL”
" ********* " ,then click “OK” (The address "*********" is correspond to
3)、Select 0x007A0000
"HDCP Key Allocation")
Step 8 When click Ok button be for step The Erase Dialog box it missing and comeback to Auto mode
again
Step 9 In the Auto mode select HDCP Key in check box
10.3 Connect VGA port with TV Complete set and turn on Machine
Step 11 when connect device complete. in the Mstar ISP Utility Click Connect mode
****Remark when complete program was show some dialog box (Device Type ) and click OK ***
Step 14 when finish Up load program remove device turn on TV complete set for checking
********_______________*********