Professional Documents
Culture Documents
The Canrig® 4017 AC electric top drive is capable of fitting into masts as small as 300k lbs. This unit sets the standard for
AC top drives installed in small drilling and workover rigs.
Each Canrig® top drive is equipped with premium features that deliver both safety and reliability. These features make the
Canrig® top drive the only one of its kind in the industry and create a system that ensures maximum efficiency.
Features
The Canrig® 6027 AC electric top drive is the only 600-horsepower top drive in the 250-ton market. This
unit delivers 30,000 ft/lbs of continuous drilling torque.
Each Canrig® top drive is equipped with premium features that deliver both safety and reliability. These
features make the Canrig® top drive the only one of its kind in the industry and create a system that
ensures maximum efficiency.
Features
Load Rating: 275 tons
Output Power (Continuous): 600 HP
Gear Ratio: 9.387:1
Maximum Continuous Torque: 30,000 ft-lb
Maximum Speed: 225 RPM
Connection Breakout Torque: 60,000 ft-lb
Weight: 18,000 lb
Canrig 1235 AC Top Drive
®
With its unique performance characteristics, the 1,000 horsepower Canrig ® 1235 AC electric top drive is
ideally suited for high-speed drilling applications.
Each Canrig® top drive is equipped with premium features that deliver both safety and reliability. These
features make the Canrig® top drive the only one of its kind in the industry and create a system that
ensures maximum efficiency.
Features
Load Rating: 350 tons
Output Power (Continuous): 1,150 HP
Gear Ratio: 5.000:1
Maximum Continuous Torque: 37,800 ft-lb
Maximum Speed: 265 RPM
Connection Breakout Torque: 87,500 ft-lb
Weight: 27,000 lb
Canrig 1250 AC Top Drive
®
The Canrig® 1250 AC electric top drive is the most powerful 500-ton top drive on the market.
Each Canrig® top drive is equipped with premium features that deliver both safety and reliability. These
features make the Canrig® top drive the only one of its kind in the industry and create a system that
ensures maximum efficiency.
Features
Load Rating: 500 tons
Output Power (Continuous): 1,150 HP
Gear Ratio: 6.808:1/8.654:1
Maximum Continuous Torque: 51,400/65,300 ft-lb
Maximum Speed: 265/225 RPM
Connection Breakout Torque: 95,000 ft-lb
Weight: 29,000/32,000 lb
Canrig 1275 AC Top Drive
®
Developed for deep drilling applications, the Canrig ® 1275 AC electric top drive is equipped with a four
inch bore and 7,500 psi pressure rating.
Each Canrig® top drive is equipped with premium features that deliver both safety and reliability. These
features make the Canrig® top drive the only one of its kind in the industry and create a system that
ensures maximum efficiency.
Features
Load Rating: 750 tons
Output Power (Continuous): 1,150 HP
Gear Ratio: 6.808:1/8.654:1
Maximum Continuous Torque: 51,400/65,300 ft-lb
Maximum Speed: 265/225 RPM
Connection Breakout Torque: 95,000 ft-lb
Weight: 30,000/32,000 lb
Tesco 150/250 EMI 400 Top Drive
®
Now managed by Canrig, the Tesco® 150-ton and 250-ton EMI 400 top drives are full-featured electric top
drives built for small-mast onshore or offshore drilling applications and are among the most versatile top
drives in Canrig’s electric top drive offering.
Capable of producing up to 298 kW (400HP), the EMI 400 employs an AC induction motor and drive
system and can be operated by a self-contained generator or by connecting directly to the rig’s AC Bus
(600 VAC, 50 or 60Hz).
The complete system including the top drive, torque system and optional VFD building can be installed in
less than one day with only minimal rig modifications needed, if any.
An optional pipe handler allows the EMI 400 to offer all critical pipe-handling functions including
elevator link-tilt, extend/retract functionality (for making mouse hole connections) and 360° pipe
handler rotation. The grabber will accommodate tool joints from 76.2 mm (3 in.) to 222.25 mm (8 3/4
in.) OD.
The EMI 400 top drive’s unique design integrates the swivel, gearbox and load frame resulting in a very
compact unit. It also incorporates a programmable logic control (PLC) which enhances communications
between the driller’s panel and the drive system, optimizes efficiency and provides important safety
interlocks.
Features
In Mast Transportation Option
Integrated Split Block Option
Compatible with Most VFD Systems
Dolly System Integrations
Compatible with Third-Party Control Systems
Tesco 350/400 EXI 600/800 Top Drive
®
Now managed by Canrig, the Tesco® 350-ton and 400-ton EXI 600 and 800 top drives are full-
featured electric top drives built for horizontal drilling applications on smaller, narrow-mast drilling rigs.
Capable of producing up to 447 kW (600HP) and 597 kW (800HP), the EXI 600/800 employs an AC
induction motor and drive system and can be operated by a self-contained generator or by connecting
directly to the rig’s AC Bus.
The complete system including the top drive, torque system and optional VFD building can be installed in
less than one day with only minimal rig modifications needed, if any.
The EXI 600 and 800 offers all critical pipe-handling functions including elevator link-tilt, extend/retract
functionality (for making mouse hole connections) and 360° pipe handler rotation. The grabber will
accommodate tool joints from 76.2 mm (3 in.) to 222.25 mm (8 3/4 in.) OD.
The EXI 600 and 800 top drive’s unique design integrates the swivel, gearbox and pipe handling spool
resulting in a very compact unit. It also incorporates a programmable logic control (PLC) which enhances
communications between the driller’s panel and the drive system, optimizes efficiency and provides
important safety interlocks.
Features
In-Mast Transportation Option
Integrated Split Block Option
Compatible with Most VFD Systems
Dolly System Integrations
Compatible with Third-Party Control Systems
25T Pull Down While Rotating
CE/ATEX Option
Stackable Module/Service Loop Option.
Tesco 500/650 ECI(S) 900 Top Drive
®
Now managed by Canrig, the Tesco® 500-ton and 650-ton ECI(S) 900 top drives are modular, high
performance electric top drives built for demanding drilling applications and are compact enough to fit
into any triple mast. In the ECI(S) 900, traditional induction motors have been replaced with two liquid-
cooled, magnet-synchronous motors which are capable of producing up to 450HP each.
The complete system including the top drive, torque system and power unit can be installed in less than
one day, typically with no rig modifications necessary. A double ball mud saver is also incorporated into
the system’s design.
The ECI(S) 900 offers all critical pipe-handling functions including elevator link-tilt, extend/retract
functionality (for making mouse hole connections up to 60 in. from well center) and 360° pipe handler
rotation. The grabber can act as a backup tong for making or breaking connections and will accommodate
tool joints from 76.2 mm (3 in.) to 222.25 mm (8 3/4 in.) OD.
The ECI(S) 900 top drive’s unique design integrates the gearbox and pipe handling spool resulting in a
very compact unit. It also incorporates a programmable logic control (PLC) which enhances
communications between the driller’s panel and the drive system, optimizes efficiency and provides
important safety interlocks.
The ECI(S) 900 comes standard with a quill that can be connected to the existing rig swivel. As an option,
it can be ordered with an integrated swivel and quill assembly, as denoted by the “S” in “ECI(S)”.
Features
Permanent Magnet Motor Technology
Lightest Weight In 500/650T Class
Ideal For Heli-Transport Solutions
Compatible With Existing Swivel
Dolly System Integrations
New eDrive Maximizes Operating Performance
1350 HP Option
eDrive Upgrade Available For Existing Units
Offshore Capable
Tesco 500 ESI 1000 Top Drive
®
Now managed by Canrig, the Tesco® 500-ton ESI 1000 top drive is an offshore-capable electric top
drive built to meet the demands of today’s highly complex drilling applications.
Capable of producing up to 746 kW (1000HP), the ESI 1000 employs an AC induction motor and drive
system and can be operated by a self-contained generator or by connecting directly to the rig’s AC Bus.
The complete system including the top drive, torque system and power unit can be installed in less than
one day, typically with no rig modifications necessary. This top drive can be supplied in condition to meet
ABS requirements upon request.
The ESI 1000 offers all critical pipe-handling functions including elevator link-tilt, extend/retract
functionality (for making mouse hole connections up to 60 in. from well center) and 360° pipe handler
rotation. The grabber will accommodate tool joints from 76.2 mm (3 in.) to 222.25 mm (8 3/4 in.) OD.
The ESI 1000 also has a 100 ton pull-down capacity.
The ESI 1000 top drive’s unique design integrates the swivel, a disc brake and pipe handling robotics
resulting in a very compact unit. It also incorporates a programmable logic control (PLC) which enhances
communications between the driller’s panel and the drive system, optimizes efficiency and provides
important safety interlocks.
Features
One of the Newest Models
100T Pull Down Capacity
Compatible with Most VFD Systems
Compatible with Third-Party Control Systems
Dolly System Integration
Tesco 750 ESI 1350 Top Drive
®
Now managed by Canrig, the Tesco® 750-ton ESI 1350 top drive is an offshore-capable electric top drive
built to meet the demands of today’s highly complex drilling applications, especially on jack-up rigs and
island barges.
Capable of producing up to 1007 kW (1350HP), the 750 ESI 1350 employs an AC induction motor and
drive system and can be operated by a self-contained generator or by connecting directly to the rig’s AC
Bus.
The complete system including the top drive, torque system and power unit can be installed in less than
one day, typically with no rig modifications necessary. This top drive can be supplied in condition to meet
ABS or CE/ATEX requirements upon request.
The 750 ESI 1350 offers all critical pipe-handling functions including elevator link-tilt, extend/retract
functionality (for making mouse hole connections up to 60 in. from well center) and 360° pipe handler
rotation. The grabber will accommodate tool joints from 76.2 mm (3 in.) to 222.25 mm (8 3/4 in.) OD.
The 750 ESI 1000 also has a 100 ton pull-down capacity while rotating.
The 750 ESI 1350 top drive’s unique design integrates the swivel, a disc brake and pipe handling robotics
resulting in a very compact unit. It also incorporates a programmable logic control (PLC) which enhances
communications between the driller’s panel and the drive system, optimizes efficiency and provides
important safety interlocks.
Features
100T Pull Down While Rotating
Compatible with most VFD Systems
Compatible with Third-Party Control Systems
Dolly System Integrations
CE/ATEX Option
Jackups And Inland Barges
ABS Option.