The document summarizes the results of analysis on two coal samples based on various parameters.
For coal sample 1, all parameters tested met the quality requirements of PT Semen Tonasa except for total moisture content and ash content which were slightly above the limits.
For coal sample 2, the total moisture content, ash content and gross calorific value met PT Semen Tonasa's quality requirements, but the volatile matter was slightly above the specified limit. Total sulfur content for both coal samples were well below the maximum allowed.
The document summarizes the results of analysis on two coal samples based on various parameters.
For coal sample 1, all parameters tested met the quality requirements of PT Semen Tonasa except for total moisture content and ash content which were slightly above the limits.
For coal sample 2, the total moisture content, ash content and gross calorific value met PT Semen Tonasa's quality requirements, but the volatile matter was slightly above the specified limit. Total sulfur content for both coal samples were well below the maximum allowed.
The document summarizes the results of analysis on two coal samples based on various parameters.
For coal sample 1, all parameters tested met the quality requirements of PT Semen Tonasa except for total moisture content and ash content which were slightly above the limits.
For coal sample 2, the total moisture content, ash content and gross calorific value met PT Semen Tonasa's quality requirements, but the volatile matter was slightly above the specified limit. Total sulfur content for both coal samples were well below the maximum allowed.
Parameter Uji Satuan Metode PT Semen Tonasa AR ADB Total Moisture % wt ASTM D 3302/D 3302M-12 Max.35,00(ar) 30,39 -
Moisturein the % wt ASTM D 3173-11 Max 15,00(adb) - 11,31
Analysis Sample Ash Content % wt ASTM D 3274-12 Max 5.00(ar) 2,42 3,11
Volatile Matter % wt ISO 562 : 2010 Max 44,00(adb) 33,57 43,10
Total Sulfur % wt ASTM D 4239-12 Max 0,50(ar) 0.06 0,07
Fixed Carbon % wt ASTM D 3272-07a - 33,08 42,48
Gross Calorific Kcal/Kg ASTMM D 5865-12 Min 4200(ar) 4339 5572
Value Tabel 5.1.1 Hasil Analisa Batubara 1 Catatan : TM( Total Moisture) diperoleh dari rumus akumulasi nilai Residual Moisture dan Volstile Matter. Persyaratan Mutu Hasil Analisa Parameter Uji Satuan Metode PT Semen Tonasa AR ADB Total Moisture % wt ASTM D 3302/D 3302M-12 Max.38,00(ar) 34,17 -
Moisturein the % wt ASTM D 3173-11 Max 16,00(adb) - 11,99
Analysis Sample Ash Content % wt ASTM D 3274-12 Max 5.00(ar) 4,45 5,95
Volatile Matter % wt ISO 562 : 2010 Max 44,00(adb) 33,35 44,58
Total Sulfur % wt ASTM D 4239-12 Max 0,50(ar) 0.07 0,09
Fixed Carbon % wt ASTM D 3272-07a - 28,04 37,48
Gross Calorific Kcal/Kg ASTMM D 5865-12 Min 4100(ar) 4131 5523
Value Tabel 5.1.2 Hasil Analisa Batubara 2 Catatan : TM( Total Moisture) diperoleh dari rumus akumulasi nilai Residual Moisture dan Volstile Matter.