Professional Documents
Culture Documents
DAQMaster (mobile)
www.autonics.com
ii © Copyright Reserved Autonics Co., Ltd.
Preface
Preface
Thank you for purchasing an Autonics product.
This user manual contains information about the product and its proper use, and should be kept
in a place where it will be easy to access.
Please familiarize yourself with the information in this manual before using the product.
This manual provides detailed information on the product's features. It does not offer any
guarantee concerning matters beyond the scope of this manual.
This manual may not be edited or reproduced in either part or whole without permission.
A user manual is not provided as part of the product package.
Visit www.autonics.com to download a copy.
The manual's content may vary depending on changes to the product's software and other
unforeseen developments within Autonics, and is subject to change without prior notice.
This manual is produced based on Android: 1.1, iOS: 1.0 version.
※1 Annotation mark.
Table of Contents
Preface .............................................................................................................................iii
User Manual Guide ......................................................................................................... iv
User Manual Symbols ...................................................................................................... v
Table of Contents ............................................................................................................. 6
1 DAQMaster (mobile) Overview ...................................................................7
1.1 Overview .............................................................................................................. 7
1.2 Application information ........................................................................................ 7
2 Connection ..................................................................................................8
2.1 New project, Direct connect................................................................................. 9
2.1.1 Supported devices (2019.02) ..................................................................... 10
2.1.2 WiFi or USB connection settings ................................................................ 11
2.2 DAQMaster ........................................................................................................ 13
2.2.1 Supported devices ...................................................................................... 13
3 Project List.................................................................................................14
3.1 Project ................................................................................................................ 14
3.1.1 Initial screen ............................................................................................... 14
3.1.2 Add ............................................................................................................. 14
3.1.3 Delete ......................................................................................................... 15
3.2 Menu .................................................................................................................. 15
3.2.1 Information ................................................................................................. 15
3.2.2 DAQMaster Notification (only for Android) ................................................. 16
3.3 Language ........................................................................................................... 16
4 Projects ......................................................................................................18
4.1 Connect Devices................................................................................................ 18
4.1.1 Add & Link .................................................................................................. 18
4.1.2 Auto scan ................................................................................................... 20
4.1.3 Modified device connection setting or delete device .................................. 23
4.2 Device monitoring .............................................................................................. 24
4.3 Parameter read/write ......................................................................................... 25
4.4 Add run time screen and run ............................................................................. 27
4.5 Save project ....................................................................................................... 29
4.6 Close project ...................................................................................................... 29
1.1 Overview
You can use DAQMaster at your smart phone.
Parameter read/write and I/O run time screen for Autonics RS485 communication devices are
available at your smart phone.
Search as below to download at each operation systems.
Android (Google Play Store): DAQMaster
iOS (App Store): DAQMaster
2 Connection
Due to DAQMaster (mobile) connection method, the available function and the supported
deivces are different.
Run DAQMaster (mobile) and Project List appears. Touch the icon you can select one
connection method; New project, direct connect, and DAQMaster connect.
2.2 DAQMaster
DAQMaster
DAQMaster Pro becames TCP/IP server and you can check the monitoring data at the
DAQMaster Mobile. It supports over DAQMaster Pro: v 3.
For more information, refer to the DAQMaster user manual.
3 Project List
3.1 Project
3.1.2 Add
Touch the icon of project list: initial screen and select the connection method to add
project. (example of new project)
3.1.3 Delete
Left swipe the project to be deleted and the icon appears. Touch this icon and the
project is deleted.
3.2 Menu
Touch the icon of project list: initial screen to enter menu.
3.2.1 Information
The information of this application is displayed.
3.3 Language
Language is available to change. Enter Setting-Language. (supported language: English,
Korean)
4 Projects
1st Enter the project, touch the icon to enter the menu.
2nd Touch the Device icon of the menu and select the desired device at the
supported device list.
3rd Set the device connection, add the Station and touch Add Device
button. (for more information about connection refer to ‘2 Connection’.)
The added device on project menu appears.
4th Select the device to be linked and touch the Link icon of the menu. The
connected device appears and the Link icon changes to the Unlink icon.
1st Enter the project, touch the icon to enter the menu.
3rd Set the station search range start-end of the device and communications. Touch the
Scan Start button to start scan.
4th The scanned device list appears. Select the device and touch the Add Device
button to add the device.
Left swipe the device to be deleted at My System and the icon appears. Touch this icon
and the device is deleted. (only when it is not linked status.)
For monitoring the linked devcie, touch the Run icon of the menu.
2nd Click the All icon of the parameter tab, it reads all parameters of the device.
3rd Touch the parameter to set, it enters to the parameter setting screen. Enter the
desired value and touch the Change Value button.
1st Select the I/Os to monitor at ‘I/O’ tab. The run time screen icon appears with
the number of added I/Os.
2nd Enter run time screen icon and enter the run time screen setting.
Set/Select the run time screen name, interval, type, and the desired I/O. Touch the
Add RunTime button.
3rd Run the device by touching the Run icon of the menu or touching the Run
button of the work space.
4th Select the desired run time screen. The run time screen appears.
Touch the Close icon and the project is closed and the project list screen appears.
MWA-DAQMaster Mobile-V2.0-1902US